blob: 23f231d6a54b988b9d0b0a8fe6603111345bac6c (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
|
/* SPDX-License-Identifier: GPL-2.0-only */
/* This file is part of the coreboot project. */
#include <stdint.h>
#include <arch/io.h>
#include <device/device.h>
#include <drivers/intel/gma/int15.h>
#include <pc80/keyboard.h>
#include <ec/acpi/ec.h>
static void ec_setup(void)
{
/* Thermal limits? Values are from ectool's RAM dump. */
ec_write(0xd1, 0x57); /* CPUH */
ec_write(0xd2, 0xc9); /* CPUL */
ec_write(0xd4, 0x64); /* SYSH */
ec_write(0xd5, 0xc9); /* SYSL */
send_ec_command(0x04); /* Set_SMI_Enable */
send_ec_command(0xab); /* Set_ACPI_Disable */
send_ec_command(0xac); /* Clr_SYS_Flag? well, why not? */
send_ec_command(0xad); /* Set_Thml_Value */
}
static void mainboard_enable(struct device *dev)
{
ec_setup();
/* LCD panel type is SIO GPIO40-43.
It's controlled by a DIP switch but was always
set to 4 while only values of 5 and 6 worked. */
install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_CENTERING, GMA_INT15_BOOT_DISPLAY_DEFAULT, (inb(0x60f) & 0x0f) + 1);
/* We have no driver for the embedded controller since the firmware
does most of the job. Hence, initialize keyboards here. */
pc_keyboard_init(NO_AUX_DEVICE);
}
struct chip_operations mainboard_ops = {
.enable_dev = mainboard_enable,
};
|
