1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
|
chip soc/intel/alderlake
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
register "pmc_gpe0_dw0" = "GPP_B"
register "pmc_gpe0_dw1" = "GPP_D"
register "pmc_gpe0_dw2" = "GPP_E"
# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
register "gen1_dec" = "0x00fc0801"
register "gen2_dec" = "0x000c0201"
# EC memory map range is 0x900-0x9ff
register "gen3_dec" = "0x00fc0901"
# EC EMI 0 range is 0xc00 - 0xc0f
register "gen4_dec" = "0x000c0c01"
# SaGv Configuration
register "sagv" = "CONFIG(ATLAS_ENABLE_SAGV) ? SaGv_Enabled : SaGv_Disabled"
# Disable S0ix
register "s0ix_enable" = "0"
# Display configuration (4 DPs)
register "ddi_ports_config" = "{
[DDI_PORT_A] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
[DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
[DDI_PORT_1] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
[DDI_PORT_2] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
}"
# Acoustic settings
register "acoustic_noise_mitigation" = "1"
register "slow_slew_rate[VR_DOMAIN_IA]" = "SLEW_FAST_4"
register "slow_slew_rate[VR_DOMAIN_GT]" = "SLEW_FAST_4"
register "fast_pkg_c_ramp_disable[VR_DOMAIN_IA]" = "1"
register "fast_pkg_c_ramp_disable[VR_DOMAIN_GT]" = "1"
# USB configuration
register "usb2_ports[0]" = "USB2_PORT_MID(OC0)"
register "usb2_ports[1]" = "USB2_PORT_MID(OC0)"
register "usb2_ports[2]" = "USB2_PORT_MID(OC1)"
register "usb2_ports[3]" = "USB2_PORT_MID(OC1)"
register "usb2_ports[4]" = "USB2_PORT_MID(OC2)"
register "usb2_ports[5]" = "USB2_PORT_MID(OC2)"
register "usb2_ports[6]" = "USB2_PORT_MID(OC3)"
register "usb2_ports[7]" = "USB2_PORT_MID(OC3)"
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)"
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)"
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)"
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)"
register "ibecc.enable" = "CONFIG(ATLAS_ENABLE_IBECC)"
register "ibecc.mode" = "CONFIG(ATLAS_ENABLE_IBECC) ? IBECC_MODE_ALL : IBECC_MODE_NONE"
register "sata_salp_support" = "1"
register "sata_ports_enable" = "{
[0] = 1,
[1] = 1,
}"
register "sata_ports_dev_slp" = "{
[0] = 1,
[1] = 1,
}"
register "serial_io_uart_mode" = "{
[PchSerialIoIndexUART0] = PchSerialIoSkipInit,
[PchSerialIoIndexUART1] = PchSerialIoPci,
[PchSerialIoIndexUART2] = PchSerialIoDisabled,
}"
# Clock source 0 is shared between PCH RP 5, 6, 7, 8, 9 and CPU RP 1, 2, 3
# Clock source 0 is therefore marked as FREE_RUNNING
# Set PCIE_RP_CLK_SRC_UNUSED on the root ports using clock source 0 so that
# we don't get a warning at boot about a missing clock definition.
register "pcie_clk_config_flag[0]" = "PCIE_CLK_FREE_RUNNING"
register "pch_pcie_rp[PCH_RP(5)].flags" = "PCIE_RP_CLK_SRC_UNUSED | PCIE_RP_CLK_REQ_UNUSED | PCIE_RP_LTR | PCIE_RP_AER"
register "pch_pcie_rp[PCH_RP(6)].flags" = "PCIE_RP_CLK_SRC_UNUSED | PCIE_RP_CLK_REQ_UNUSED | PCIE_RP_LTR | PCIE_RP_AER"
register "pch_pcie_rp[PCH_RP(7)].flags" = "PCIE_RP_CLK_SRC_UNUSED | PCIE_RP_CLK_REQ_UNUSED | PCIE_RP_LTR | PCIE_RP_AER"
register "pch_pcie_rp[PCH_RP(8)].flags" = "PCIE_RP_CLK_SRC_UNUSED | PCIE_RP_CLK_REQ_UNUSED | PCIE_RP_LTR | PCIE_RP_AER"
register "pch_pcie_rp[PCH_RP(9)].flags" = "PCIE_RP_CLK_SRC_UNUSED | PCIE_RP_CLK_REQ_UNUSED | PCIE_RP_LTR | PCIE_RP_AER" # UFS or general purpose RP
register "pch_pcie_rp[PCH_RP(5)].pcie_rp_aspm" = "ASPM_DISABLE"
register "pch_pcie_rp[PCH_RP(6)].pcie_rp_aspm" = "ASPM_DISABLE"
register "pch_pcie_rp[PCH_RP(7)].pcie_rp_aspm" = "ASPM_DISABLE"
register "pch_pcie_rp[PCH_RP(8)].pcie_rp_aspm" = "ASPM_DISABLE"
register "pch_pcie_rp[PCH_RP(9)].pcie_rp_aspm" = "ASPM_DISABLE"
register "pch_pcie_rp[PCH_RP(5)].PcieRpL1Substates" = "L1_SS_DISABLED"
register "pch_pcie_rp[PCH_RP(6)].PcieRpL1Substates" = "L1_SS_DISABLED"
register "pch_pcie_rp[PCH_RP(7)].PcieRpL1Substates" = "L1_SS_DISABLED"
register "pch_pcie_rp[PCH_RP(8)].PcieRpL1Substates" = "L1_SS_DISABLED"
register "pch_pcie_rp[PCH_RP(9)].PcieRpL1Substates" = "L1_SS_DISABLED"
# Enable PCIe-to-i225 bridge using clk 1
#TODO set clk_req, once it's connected on atlas. clk_req now defaults to 0,
# because using 0xFF (unused) would trigger a bug.
register "pch_pcie_rp[PCH_RP(10)]" = "{
.clk_src = 1,
.flags = PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_BUILT_IN,
.pcie_rp_aspm = ASPM_AUTO,
}"
device domain 0 on
device ref pcie5_0 on
register "cpu_pcie_rp[CPU_RP(2)].flags" = "PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_CLK_SRC_UNUSED"
register "cpu_pcie_rp[CPU_RP(2)].pcie_rp_aspm" = "ASPM_AUTO"
register "cpu_pcie_rp[CPU_RP(2)].PcieRpL1Substates" = "L1_SS_DISABLED"
end
device ref igpu on end
# without DDT enabled, edk2 doesn't even finish (TODO)
device ref dtt on end
device ref pcie4_0 on
register "cpu_pcie_rp[CPU_RP(1)].flags" = "PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_CLK_SRC_UNUSED"
register "cpu_pcie_rp[CPU_RP(1)].pcie_rp_aspm" = "ASPM_DISABLE"
register "cpu_pcie_rp[CPU_RP(1)].PcieRpL1Substates" = "L1_SS_DISABLED"
end
device ref pcie4_1 on
register "cpu_pcie_rp[CPU_RP(3)].flags" = "PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_CLK_SRC_UNUSED"
register "cpu_pcie_rp[CPU_RP(3)].pcie_rp_aspm" = "ASPM_DISABLE"
register "cpu_pcie_rp[CPU_RP(3)].PcieRpL1Substates" = "L1_SS_DISABLED"
end
# TODO try enabling crashlog
device ref crashlog on end
device ref ish on end
device ref ufs off end
device ref tcss_xhci on end
device ref xhci on end
device ref heci1 on end
device ref sata on end
# pcie_rp[1-4] is used for USB
device ref pcie_rp5 on end
device ref pcie_rp6 on end
device ref pcie_rp7 on end
device ref pcie_rp8 on end
device ref pcie_rp9 on end
device ref pcie_rp10 on end
# pcie_rp[11-12] is used for SATA
device ref uart0 on end
device ref uart1 on end
device ref pch_espi on
chip drivers/pc80/tpm
device pnp 0c31.0 on end
end
end
device ref p2sb on end
device ref hda on end
device ref smbus on end
end
end
|
