1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
|
chip soc/intel/alderlake
# GPE configuration
# Note that GPE events called out in ASL code rely on this
# route. i.e. If this route changes then the affected GPE
# offset bits also need to be changed.
register "pmc_gpe0_dw0" = "GPP_B"
register "pmc_gpe0_dw1" = "GPP_D"
register "pmc_gpe0_dw2" = "GPP_E"
# EC host command ranges are in 0x800-0x8ff & 0x200-0x20f
register "gen1_dec" = "0x00fc0801"
register "gen2_dec" = "0x000c0201"
# EC memory map range is 0x900-0x9ff
register "gen3_dec" = "0x00fc0901"
# SaGv Configuration
register "sagv" = "CONFIG(ATLAS_ENABLE_SAGV) ? SaGv_Enabled : SaGv_Disabled"
# Display configuration (4 DPs)
register "ddi_ports_config" = "{
[DDI_PORT_A] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
[DDI_PORT_B] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
[DDI_PORT_1] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
[DDI_PORT_2] = DDI_ENABLE_HPD | DDI_ENABLE_DDC,
}"
# Acoustic settings
register "acoustic_noise_mitigation" = "1"
register "slow_slew_rate[VR_DOMAIN_IA]" = "SLEW_FAST_4"
register "slow_slew_rate[VR_DOMAIN_GT]" = "SLEW_FAST_4"
register "fast_pkg_c_ramp_disable[VR_DOMAIN_IA]" = "1"
register "fast_pkg_c_ramp_disable[VR_DOMAIN_GT]" = "1"
# USB configuration
register "usb2_ports[0]" = "USB2_PORT_MID(OC0)"
register "usb2_ports[1]" = "USB2_PORT_MID(OC0)"
register "usb2_ports[2]" = "USB2_PORT_MID(OC1)"
register "usb2_ports[3]" = "USB2_PORT_MID(OC1)"
register "usb2_ports[4]" = "USB2_PORT_MID(OC2)"
register "usb2_ports[5]" = "USB2_PORT_MID(OC2)"
register "usb2_ports[6]" = "USB2_PORT_MID(OC3)"
register "usb2_ports[7]" = "USB2_PORT_MID(OC3)"
register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)"
register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)"
register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC1)"
register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC1)"
register "ibecc.enable" = "CONFIG(ATLAS_ENABLE_IBECC)"
register "ibecc.mode" = "CONFIG(ATLAS_ENABLE_IBECC) ? IBECC_MODE_ALL : IBECC_MODE_NONE"
register "sata_salp_support" = "1"
register "sata_ports_enable" = "{
[0] = 1,
[1] = 1,
}"
register "sata_ports_dev_slp" = "{
[0] = 1,
[1] = 1,
}"
register "serial_io_uart_mode" = "{
[PchSerialIoIndexUART0] = PchSerialIoSkipInit,
[PchSerialIoIndexUART1] = PchSerialIoPci,
[PchSerialIoIndexUART2] = PchSerialIoDisabled,
}"
# Enable PCH PCIE RP 5, 6, 7, 8, 9 using free running CLK (0x80)
# Clock source is shared hence marked as free running.
register "pch_pcie_rp[PCH_RP(5)]" = "{
.flags = PCIE_RP_CLK_SRC_UNUSED,
}"
register "pch_pcie_rp[PCH_RP(6)]" = "{
.flags = PCIE_RP_CLK_SRC_UNUSED,
}"
register "pch_pcie_rp[PCH_RP(7)]" = "{
.flags = PCIE_RP_CLK_SRC_UNUSED,
}"
register "pch_pcie_rp[PCH_RP(8)]" = "{
.flags = PCIE_RP_CLK_SRC_UNUSED,
}"
register "pch_pcie_rp[PCH_RP(9)]" = "{
.flags = PCIE_RP_CLK_SRC_UNUSED,
}"
# Enable PCIe-to-i225 bridge using clk 1
register "pch_pcie_rp[PCH_RP(10)]" = "{
.clk_src = 1,
.flags = PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_BUILT_IN,
.pcie_rp_aspm = ASPM_DISABLE,
}"
register "pcie_clk_config_flag[0]" = "PCIE_CLK_FREE_RUNNING"
# Enable CPU PCIE RP 1, 2, 3 using using free running CLK (0x80)
# Clock source is shared hence marked as free running.
register "cpu_pcie_rp[CPU_RP(1)]" = "{
.flags = PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_CLK_SRC_UNUSED,
}"
register "cpu_pcie_rp[CPU_RP(2)]" = "{
.flags = PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_CLK_SRC_UNUSED,
}"
register "cpu_pcie_rp[CPU_RP(3)]" = "{
.flags = PCIE_RP_LTR | PCIE_RP_AER | PCIE_RP_CLK_SRC_UNUSED,
}"
device domain 0 on
device ref pcie5_0 on end
device ref igpu on end
device ref dtt on end
device ref pcie4_0 on end
device ref pcie4_1 on end
device ref crashlog off end
device ref ish on end
device ref ufs on end
device ref tcss_xhci on end
device ref xhci on end
device ref heci1 on end
device ref sata on end
device ref pcie_rp5 on end
device ref pcie_rp6 on end
device ref pcie_rp7 on end
device ref pcie_rp8 on end
device ref pcie_rp9 on end
device ref pcie_rp10 on end
device ref uart0 on end
device ref uart1 on end
device ref pch_espi on
chip drivers/pc80/tpm
device pnp 0c31.0 on end
end
end
device ref p2sb on end
device ref hda on end
device ref smbus on end
end
end
|
