1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc.
*/
#include <stdlib.h>
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <arch/io.h>
#include <cpu/x86/msr.h>
#include <device/pci_def.h>
#include <southbridge/amd/sb800/sb800.h>
#include <arch/acpi.h>
#include <northbridge/amd/agesa/BiosCallOuts.h>
#include <cpu/amd/agesa/s3_resume.h>
#include <cpu/amd/mtrr.h>
#include "SBPLATFORM.h"
#include "OEM.h" /* SMBUS0_BASE_ADDRESS */
#include <southbridge/amd/cimx/sb800/gpio_oem.h>
/* Write data block to slave on SMBUS0. */
#define SMB0_STATUS ((SMBUS0_BASE_ADDRESS) + 0)
#define SMB0_CONTROL ((SMBUS0_BASE_ADDRESS) + 2)
#define SMB0_HOSTCMD ((SMBUS0_BASE_ADDRESS) + 3)
#define SMB0_ADDRESS ((SMBUS0_BASE_ADDRESS) + 4)
#define SMB0_DATA0 ((SMBUS0_BASE_ADDRESS) + 5)
#define SMB0_BLOCKDATA ((SMBUS0_BASE_ADDRESS) + 7)
static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data)
{
__outbyte(SMB0_STATUS, 0x1E); // clear error status
__outbyte(SMB0_ADDRESS, slave & ~1); // slave addr + direction=out
__outbyte(SMB0_HOSTCMD, command); // or destination offset
__outbyte(SMB0_DATA0, length); // sent before data
__inbyte(SMB0_CONTROL); // reset block data array
while (length--)
__outbyte(SMB0_BLOCKDATA, *(data++));
__outbyte(SMB0_CONTROL, 0x54); // execute block write, no IRQ
while (__inbyte(SMB0_STATUS) == 0x01) ; // busy, no errors
return __inbyte(SMB0_STATUS) ^ 0x02; // 0x02 = completed, no errors
}
static void init(struct device *dev)
{
volatile u8 *spi_base; // base addr of Hudson's SPI host controller
int i;
printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__);
/* Init Hudson GPIOs. */
printk(BIOS_DEBUG, "Init FCH GPIOs @ 0x%08x\n", ACPI_MMIO_BASE+GPIO_BASE);
FCH_IOMUX( 50) = 2; // GPIO50: FCH_ARST#_GATE resets stuck PCIe devices
FCH_GPIO ( 50) = 0xC0; // = output set to 1 as it's never needed
FCH_IOMUX(197) = 2; // GPIO197: BIOS_DEFAULTS#
FCH_GPIO (197) = 0x28; // = input, disable int. pull-up
FCH_IOMUX( 56) = 1; // GPIO58-56: REV_ID2-0
FCH_GPIO ( 56) = 0x28; // = inputs, disable int. pull-ups
FCH_IOMUX( 57) = 1;
FCH_GPIO ( 57) = 0x28;
FCH_IOMUX( 58) = 1;
FCH_GPIO ( 58) = 0x28;
FCH_IOMUX(187) = 2; // GPIO187,188,166,GPO160: GPO0-3 on COM Express connector
FCH_GPIO (187) = 0x08; // = outputs, disable PUs, default to 0
FCH_IOMUX(188) = 2;
FCH_GPIO (188) = 0x08;
FCH_IOMUX(166) = 2;
FCH_GPIO (166) = 0x08;
// needed to make GPO160 work (Hudson Register Reference section 2.3.6.1)
FCH_PMIO(0xDC) &= ~0x80; FCH_PMIO(0xE6) = (FCH_PMIO(0xE6) & ~0x02) | 0x01;
FCH_IOMUX(160) = 1;
FCH_GPIO (160) = 0x08;
FCH_IOMUX(189) = 1; // GPIO189-192: GPI0-3 on COM Express connector
FCH_IOMUX(190) = 1; // default to inputs with int. PU
FCH_IOMUX(191) = 1;
FCH_IOMUX(192) = 1;
if (!fch_gpio_state(197)) // just in case anyone cares
printk(BIOS_INFO, "BIOS_DEFAULTS jumper is present.\n");
printk(BIOS_INFO, "Board revision ID: %u\n",
fch_gpio_state(58)<<2 | fch_gpio_state(57)<<1 | fch_gpio_state(56));
/* Lower SPI speed from default 66 to 22 MHz for SST 25VF032B */
spi_base = (u8*)((uintptr_t)pci_read_config32(dev_find_slot(0, PCI_DEVFN(0x14, 3)), 0xA0) & 0xFFFFFFE0);
spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20; // NormSpeed in SPI_Cntrl1 register
/* Notify the SMC we're alive and kicking, or after a while it will
* effect a power cycle and switch to the alternate BIOS chip.
* Should be done as late as possible. */
printk(BIOS_INFO, "Sending BIOS alive message\n");
const u8 i_am_alive[] = { 0x03 }; //bit2=SEL_DP0: 0=DDI2, 1=LVDS
if ((i = smb_write_blk(0x50, 0x25, sizeof(i_am_alive), i_am_alive)))
printk(BIOS_ERR, "smb_write_blk failed: %d\n", i);
printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " EXIT %s\n", __func__);
}
void set_pcie_reset(void);
void set_pcie_dereset(void);
/**
* TODO
* SB CIMx callback
*/
void set_pcie_reset(void)
{
}
/**
* TODO
* mainboard specific SB CIMx callback
*/
void set_pcie_dereset(void)
{
}
/**********************************************
* Enable the dedicated functions of the board.
**********************************************/
static void mainboard_enable(device_t dev)
{
printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
dev->ops->init = init;
/* enable GPP CLK0 thru CLK1 */
/* disable GPP CLK2 thru SLT_GFX_CLK */
u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE);
*(misc_mem_clk_cntrl + 0) = 0xFF;
*(misc_mem_clk_cntrl + 1) = 0x00;
*(misc_mem_clk_cntrl + 2) = 0x00;
*(misc_mem_clk_cntrl + 3) = 0x00;
*(misc_mem_clk_cntrl + 4) = 0x00;
/*
* Initialize ASF registers to an arbitrary address because someone
* long ago set things up this way inside the SPD read code. The
* SPD read code has been made generic and moved out of the board
* directory, so the ASF init is being done here.
*/
pm_iowrite(0x29, 0x80);
pm_iowrite(0x28, 0x61);
}
struct chip_operations mainboard_ops = {
.enable_dev = mainboard_enable,
};
|