1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008 LiPPERT Embedded Computers GmbH
* Copyright (C) 2007 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
/* Based on romstage.c from AMD's DB800 and DBM690T mainboards. */
#include <stdlib.h>
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/hlt.h>
#include <console/console.h>
#include "cpu/x86/bist.h"
#include "cpu/x86/msr.h"
#include <cpu/amd/lxdef.h>
#include <cpu/amd/geode_post_code.h>
#include "southbridge/amd/cs5536/cs5536.h"
#include <spd.h>
#include "southbridge/amd/cs5536/cs5536_early_smbus.c"
#include "southbridge/amd/cs5536/cs5536_early_setup.c"
#include "superio/ite/it8712f/it8712f_early_serial.c"
#define ManualConf 1 /* No automatic strapped PLL config */
#define PLLMSRhi 0x0000049C /* Manual settings for the PLL */
#define PLLMSRlo 0x00DE6001
static inline int spd_read_byte(unsigned int device, unsigned int address)
{
if (device != DIMM0)
return 0xFF; /* No DIMM1, don't even try. */
return smbus_read_byte(device, address);
}
#include "northbridge/amd/lx/raminit.h"
#include "northbridge/amd/lx/pll_reset.c"
#include "northbridge/amd/lx/raminit.c"
#include "lib/generic_sdram.c"
#include "cpu/amd/model_lx/cpureginit.c"
#include "cpu/amd/model_lx/syspreinit.c"
#include "cpu/amd/model_lx/msrinit.c"
static const u16 sio_init_table[] = { // hi=data, lo=index
0x0707, // select LDN 7 (GPIO, SPI, watchdog, ...)
0x1E2C, // disable ATXPG; VIN6,FAN4/5,VIN3 enabled, VIN7 internal
0x1423, // don't delay PoWeROK1/2 - triggers 2nd reset
0x9072, // watchdog triggers PWROK, counts seconds
#if !CONFIG_USE_WATCHDOG_ON_BOOT
0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0
#endif
0xBF25, 0x372A, 0xF326, // select GPIO function for most pins
0xBF27, 0xFF28, 0x2529, // (GP36=FAN_CTL3, GP13=PWROK1)
0x46B8, 0x0CB9, // enable pullups on RS485_EN
0x36C0, // enable Simple-I/O for GP15,14,12,11= LIVE_LED, WD_ACTIVE, RS485_EN2,1
0xFFC3, // enable Simple-I/O for GP47-40 (GPIOs on Supervisory Connector)
0x26C8, // config GP15,12,11 as output; GP14 as input
0x2DF5, // map Hw Monitor Thermal Output to GP55
0x0DF8, // map GP LED Blinking 1 to GP15=LIVE_LED (deactivate Simple-I/O to use)
};
/* Early mainboard specific GPIO setup. */
static void mb_gpio_init(void)
{
int i;
/* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */
it8712f_enter_conf();
for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) {
u16 val = sio_init_table[i];
outb((u8)val, SIO_INDEX);
outb(val >> 8, SIO_DATA);
}
it8712f_exit_conf();
}
void main(unsigned long bist)
{
post_code(0x01);
static const struct mem_controller memctrl[] = {
{.channel0 = {DIMM0, DIMM1}}
};
SystemPreInit();
msr_init();
cs5536_early_setup();
/*
* Note: must do this AFTER the early_setup! It is counting on some
* early MSR setup for CS5536.
*/
it8712f_enable_serial(0, CONFIG_TTYS0_BASE); // Does not use its 1st parameter
mb_gpio_init();
uart_init();
console_init();
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
pll_reset(ManualConf);
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
sdram_initialize(1, memctrl);
/* Check memory. */
/* ram_check(0x00000000, 640 * 1024); */
/* Memory is setup. Return to cache_as_ram.inc and continue to boot. */
return;
}
|
