1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <stdlib.h>
#include <amdblocks/acpimmio.h>
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <arch/io.h>
#include <device/mmio.h>
#include <device/pci_ops.h>
#include <device/pci_def.h>
#include <southbridge/amd/cimx/sb800/SBPLATFORM.h>
#include <vendorcode/amd/cimx/sb800/OEM.h> /* SMBUS0_BASE_ADDRESS */
#include <southbridge/amd/cimx/sb800/gpio_oem.h>
#include "sema.h"
/* Init SIO GPIOs. */
#define SIO_RUNTIME_BASE 0x0E00
static const u16 sio_init_table[] = { // hi = offset, lo = value
0x4BA0, // GP1x: COM1/2 control = RS232, no term, max 115200
0x2300, // GP10: COM1 termination = push/pull output
0x2400, // GP11: COM2 termination = push/pull output
0x2500, // GP12: COM1 RS485 mode = push/pull output
0x2600, // GP13: COM2 RS485 mode = push/pull output
0x2700, // GP14: COM1 speed A = push/pull output
0x2900, // GP15: COM1 speed B = push/pull output
0x2A00, // GP16: COM2 speed A = push/pull output
0x2B00, // GP17: COM2 speed B = push/pull output
0x3904, // GP36 = KBDRST# function
0x4E74, // GP4x: Ethernet enable = on
0x6E84, // GP44: Ethernet enable = open drain output
// GP5x = COM2 function instead of GPIO
0x3F05, 0x4005, 0x4105, 0x4204, 0x4305, 0x4404, 0x4505, 0x4604,
0x470C, // GP60 = WDT function
0x5E00, // LED2: Live LED = off
0x4884, // GP61: Live LED = LED2 function
0x5038, // GP6x: USB power = 3x on
0x5580, // GP63: USB power 0/1 = open drain output
0x5680, // GP64: USB power 2/3 = open drain output
0x5780, // GP65: USB power 4/5 = open drain output
};
static void init(struct device *dev)
{
volatile u8 *spi_base; // base addr of Hudson's SPI host controller
int i;
printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__);
/* Init Hudson GPIOs. */
printk(BIOS_DEBUG, "Init FCH GPIOs @ 0x%08x\n", ACPI_MMIO_BASE+GPIO_BASE);
FCH_IOMUX(50) = 2; // GPIO50: FCH_ARST#_GATE resets stuck PCIe devices
FCH_GPIO (50) = 0xC0; // = output set to 1 as it's never needed
FCH_IOMUX(197) = 2; // GPIO197: BIOS_DEFAULTS# = input (int. PU)
FCH_IOMUX(56) = 1; // GPIO58-56: REV_ID2-0
FCH_GPIO (56) = 0x28; // = inputs, disable int. pull-ups
FCH_IOMUX(57) = 1;
FCH_GPIO (57) = 0x28;
FCH_IOMUX(58) = 1;
FCH_GPIO (58) = 0x28;
FCH_IOMUX(96) = 1; // "Gpio96": GEVENT0# signal on X2 connector (int. PU)
FCH_IOMUX(52) = 1; // GPIO52,61,62,187-192 free to use on X2 connector
FCH_IOMUX(61) = 2; // default to inputs with int. PU
FCH_IOMUX(62) = 2;
FCH_IOMUX(187) = 2;
FCH_IOMUX(188) = 2;
FCH_IOMUX(189) = 1;
FCH_IOMUX(190) = 1;
FCH_IOMUX(191) = 1;
FCH_IOMUX(192) = 1;
if (!fch_gpio_state(197)) // just in case anyone cares
printk(BIOS_INFO, "BIOS_DEFAULTS jumper is present.\n");
printk(BIOS_INFO, "Board revision ID: %u\n",
fch_gpio_state(58)<<2 | fch_gpio_state(57)<<1 | fch_gpio_state(56));
/* Init SIO GPIOs. */
printk(BIOS_DEBUG, "Init SIO GPIOs @ 0x%04x\n", SIO_RUNTIME_BASE);
for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) {
u16 val = sio_init_table[i];
outb((u8)val, SIO_RUNTIME_BASE + (val >> 8));
}
/* Lower SPI speed from default 66 to 22 MHz for SST 25VF032B */
spi_base = (u8 *)((uintptr_t)pci_read_config32(pcidev_on_root(0x14, 3),
0xA0) & 0xFFFFFFE0);
spi_base[0x0D] = (spi_base[0x0D] & ~0x30) | 0x20; // NormSpeed in SPI_Cntrl1 register
/* Notify the SMC we're alive and kicking, or after a while it will
* effect a power cycle and switch to the alternate BIOS chip.
* Should be done as late as possible.
* Failure here does not matter if watchdog was already disabled,
* by configuration or previous boot, so ignore return value.
*/
sema_send_alive();
printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " EXIT %s\n", __func__);
}
/**********************************************
* Enable the dedicated functions of the board.
**********************************************/
static void mainboard_enable(struct device *dev)
{
printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
dev->ops->init = init;
/* enable GPP CLK0 */
/* disable GPP CLK1 thru SLT_GFX_CLK */
u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE);
write8(misc_mem_clk_cntrl + 0, 0x0F);
write8(misc_mem_clk_cntrl + 1, 0x00);
write8(misc_mem_clk_cntrl + 2, 0x00);
write8(misc_mem_clk_cntrl + 3, 0x00);
write8(misc_mem_clk_cntrl + 4, 0x00);
/*
* Initialize ASF registers to an arbitrary address because someone
* long ago set things up this way inside the SPD read code. The
* SPD read code has been made generic and moved out of the board
* directory, so the ASF init is being done here.
*/
pm_write8(0x29, 0x80);
pm_write8(0x28, 0x61);
}
struct chip_operations mainboard_ops = {
.enable_dev = mainboard_enable,
};
|
