1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <stdlib.h>
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <arch/io.h>
#include <cpu/x86/msr.h>
#include <device/pci_def.h>
#include <southbridge/amd/sb800/sb800.h>
#include <arch/acpi.h>
#include "BiosCallOuts.h"
#include <cpu/amd/agesa/s3_resume.h>
#include <cpu/amd/mtrr.h>
#include "SBPLATFORM.h"
#include "OEM.h" /* SMBUS0_BASE_ADDRESS */
/* Init SIO GPIOs. */
#define SIO_RUNTIME_BASE 0x0E00
static const u16 sio_init_table[] = { // hi=offset, lo=value
0x4BA0, // GP1x: COM1/2 control = RS232, no term, max 115200
0x2300, // GP10: COM1 termination = push/pull output
0x2400, // GP11: COM2 termination = push/pull output
0x2500, // GP12: COM1 RS485 mode = push/pull output
0x2600, // GP13: COM2 RS485 mode = push/pull output
0x2700, // GP14: COM1 speed A = push/pull output
0x2900, // GP15: COM1 speed B = push/pull output
0x2A00, // GP16: COM2 speed A = push/pull output
0x2B00, // GP17: COM2 speed B = push/pull output
0x3904, // GP36 = KBDRST# function
0x4E74, // GP4x: Ethernet enable = on
0x6E84, // GP44: Ethernet enable = open drain output
// GP5x = COM2 function instead of GPIO
0x3F05, 0x4005, 0x4105, 0x4204, 0x4305, 0x4404, 0x4505, 0x4604,
0x470C, // GP60 = WDT function
0x5E00, // LED2: Live LED = off
0x4884, // GP61: Live LED = LED2 function
0x5038, // GP6x: USB power = 3x on
0x5580, // GP63: USB power 0/1 = open drain output
0x5680, // GP64: USB power 2/3 = open drain output
0x5780, // GP65: USB power 4/5 = open drain output
};
/* Write data block to slave on SMBUS0. */
#define SMB0_STATUS ((SMBUS0_BASE_ADDRESS) + 0)
#define SMB0_CONTROL ((SMBUS0_BASE_ADDRESS) + 2)
#define SMB0_HOSTCMD ((SMBUS0_BASE_ADDRESS) + 3)
#define SMB0_ADDRESS ((SMBUS0_BASE_ADDRESS) + 4)
#define SMB0_DATA0 ((SMBUS0_BASE_ADDRESS) + 5)
#define SMB0_BLOCKDATA ((SMBUS0_BASE_ADDRESS) + 7)
static int smb_write_blk(u8 slave, u8 command, u8 length, const u8 *data)
{
__outbyte(SMB0_STATUS, 0x1E); // clear error status
__outbyte(SMB0_ADDRESS, slave & ~1); // slave addr + direction=out
__outbyte(SMB0_HOSTCMD, command); // or destination offset
__outbyte(SMB0_DATA0, length); // sent before data
__inbyte(SMB0_CONTROL); // reset block data array
while (length--)
__outbyte(SMB0_BLOCKDATA, *(data++));
__outbyte(SMB0_CONTROL, 0x54); // execute block write, no IRQ
while (__inbyte(SMB0_STATUS) == 0x01) ; // busy, no errors
return __inbyte(SMB0_STATUS) ^ 0x02; // 0x02 = completed, no errors
}
static void init(struct device *dev)
{
int i;
printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " ENTER %s\n", __func__);
/* Init Hudson GPIOs. */
printk(BIOS_DEBUG, "Init FCH GPIOs @ 0x%08x\n", ACPI_MMIO_BASE+GPIO_BASE);
FCH_IOMUX( 50) = 2; // GPIO50: FCH_ARST#_GATE resets stuck PCIe devices
FCH_GPIO ( 50) = 0xC0; // = output set to 1 as it's never needed
FCH_IOMUX(197) = 2; // GPIO197: BIOS_DEFAULTS# = input (int. PU)
FCH_IOMUX( 56) = 1; // GPIO58-56: REV_ID2-0
FCH_GPIO ( 56) = 0x28; // = inputs, disable int. pull-ups
FCH_IOMUX( 57) = 1;
FCH_GPIO ( 57) = 0x28;
FCH_IOMUX( 58) = 1;
FCH_GPIO ( 58) = 0x28;
FCH_IOMUX( 96) = 1; // "Gpio96": GEVENT0# signal on X2 connector (int. PU)
FCH_IOMUX( 52) = 1; // GPIO52,61,62,187-192 free to use on X2 connector
FCH_IOMUX( 61) = 2; // default to inputs with int. PU
FCH_IOMUX( 62) = 2;
FCH_IOMUX(187) = 2;
FCH_IOMUX(188) = 2;
FCH_IOMUX(189) = 1;
FCH_IOMUX(190) = 1;
FCH_IOMUX(191) = 1;
FCH_IOMUX(192) = 1;
if (!fch_gpio_state(197)) // just in case anyone cares
printk(BIOS_INFO, "BIOS_DEFAULTS jumper is present.\n");
printk(BIOS_INFO, "Board revision ID: %u\n",
fch_gpio_state(58)<<2 | fch_gpio_state(57)<<1 | fch_gpio_state(56));
/* Init SIO GPIOs. */
printk(BIOS_DEBUG, "Init SIO GPIOs @ 0x%04x\n", SIO_RUNTIME_BASE);
for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) {
u16 val = sio_init_table[i];
outb((u8)val, SIO_RUNTIME_BASE + (val >> 8));
}
/* Notify the SMC we're alive and kicking, or after a while it will
* effect a power cycle and switch to the alternate BIOS chip.
* Should be done as late as possible. */
printk(BIOS_INFO, "Sending BIOS alive message\n");
const u8 i_am_alive[] = { 0x03 };
if ((i = smb_write_blk(0x50, 0x25, sizeof(i_am_alive), i_am_alive)))
printk(BIOS_ERR, "smb_write_blk failed: %d\n", i);
printk(BIOS_DEBUG, CONFIG_MAINBOARD_PART_NUMBER " EXIT %s\n", __func__);
}
void set_pcie_reset(void);
void set_pcie_dereset(void);
/**
* TODO
* SB CIMx callback
*/
void set_pcie_reset(void)
{
}
/**
* TODO
* mainboard specific SB CIMx callback
*/
void set_pcie_dereset(void)
{
}
/**********************************************
* Enable the dedicated functions of the board.
**********************************************/
static void mainboard_enable(device_t dev)
{
printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
dev->ops->init = init;
/*
* The mainboard is the first place that we get control in ramstage. Check
* for S3 resume and call the approriate AGESA/CIMx resume functions.
*/
#if CONFIG_HAVE_ACPI_RESUME
acpi_slp_type = acpi_get_sleep_type();
#endif
/* enable GPP CLK0 */
/* disable GPP CLK1 thru SLT_GFX_CLK */
u8 *misc_mem_clk_cntrl = (u8 *)(ACPI_MMIO_BASE + MISC_BASE);
*(misc_mem_clk_cntrl + 0) = 0x0F;
*(misc_mem_clk_cntrl + 1) = 0x00;
*(misc_mem_clk_cntrl + 2) = 0x00;
*(misc_mem_clk_cntrl + 3) = 0x00;
*(misc_mem_clk_cntrl + 4) = 0x00;
}
struct chip_operations mainboard_ops = {
.enable_dev = mainboard_enable,
};
|
