1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <stdint.h>
#include <northbridge/intel/haswell/haswell.h>
#include <northbridge/intel/haswell/raminit.h>
#include <southbridge/intel/lynxpoint/pch.h>
#include <option.h>
#include <ec/lenovo/pmh7/pmh7.h>
#include <device/pci_ops.h>
void mainboard_config_rcba(void)
{
RCBA16(D31IR) = DIR_ROUTE(PIRQA, PIRQD, PIRQC, PIRQA);
RCBA16(D29IR) = DIR_ROUTE(PIRQH, PIRQD, PIRQA, PIRQC);
RCBA16(D28IR) = DIR_ROUTE(PIRQA, PIRQA, PIRQA, PIRQA);
RCBA16(D27IR) = DIR_ROUTE(PIRQG, PIRQB, PIRQC, PIRQD);
RCBA16(D26IR) = DIR_ROUTE(PIRQA, PIRQF, PIRQC, PIRQD);
RCBA16(D25IR) = DIR_ROUTE(PIRQE, PIRQF, PIRQG, PIRQH);
RCBA16(D22IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD);
RCBA16(D20IR) = DIR_ROUTE(PIRQA, PIRQB, PIRQC, PIRQD);
}
void mb_late_romstage_setup(void)
{
u8 enable_peg;
if (get_option(&enable_peg, "enable_dual_graphics") != CB_SUCCESS)
enable_peg = 0;
bool power_en = pmh7_dgpu_power_state();
if (enable_peg != power_en)
pmh7_dgpu_power_enable(!power_en);
if (!enable_peg) {
// Hide disabled dGPU device
u32 reg32 = pci_read_config32(PCI_DEV(0, 0, 0), DEVEN);
reg32 &= ~DEVEN_D1F0EN;
pci_write_config32(PCI_DEV(0, 0, 0), DEVEN, reg32);
}
}
void mb_get_spd_map(uint8_t spd_map[4])
{
spd_map[0] = 0xa0;
spd_map[2] = 0xa2;
}
const struct usb2_port_setting mainboard_usb2_ports[MAX_USB2_PORTS] = {
/* Length, Enable, OCn#, Location */
{ 0x0040, 1, 0, USB_PORT_BACK_PANEL }, /* USB3 */
{ 0x0040, 1, 0, USB_PORT_BACK_PANEL }, /* USB3 */
{ 0x0110, 1, 1, USB_PORT_BACK_PANEL }, /* USB2 charge */
{ 0x0040, 1, USB_OC_PIN_SKIP, USB_PORT_BACK_PANEL },
{ 0x0080, 1, USB_OC_PIN_SKIP, USB_PORT_DOCK },
{ 0x0080, 1, 2, USB_PORT_BACK_PANEL }, /* USB2 */
{ 0x0040, 1, 3, USB_PORT_BACK_PANEL },
{ 0x0040, 1, 3, USB_PORT_BACK_PANEL },
{ 0x0040, 1, 4, USB_PORT_BACK_PANEL },
{ 0x0110, 1, 4, USB_PORT_BACK_PANEL }, /* WWAN */
{ 0x0040, 1, 5, USB_PORT_INTERNAL }, /* WLAN */
{ 0x0040, 1, 5, USB_PORT_BACK_PANEL }, /* webcam */
{ 0x0080, 1, 6, USB_PORT_BACK_PANEL },
{ 0x0040, 1, 6, USB_PORT_BACK_PANEL },
};
const struct usb3_port_setting mainboard_usb3_ports[MAX_USB3_PORTS] = {
{ 1, 0 },
{ 1, 0 },
{ 1, USB_OC_PIN_SKIP },
{ 1, USB_OC_PIN_SKIP },
{ 1, 1 },
{ 1, 1 }, /* WWAN */
};
|
