1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include "mainboard.h"
#include <vendorcode/amd/agesa/f15tn/AGESA.h>
/* Include the files that instantiate the configuration definitions. */
#include <vendorcode/amd/agesa/f15tn/Include/AdvancedApi.h>
#include <vendorcode/amd/agesa/f15tn/Proc/CPU/cpuFamilyTranslation.h>
#include <vendorcode/amd/agesa/f15tn/Proc/CPU/Feature/cpuFeatures.h>
#include <vendorcode/amd/agesa/f15tn/Proc/CPU/heapManager.h>
/* AGESA nonsense: the next two headers depend on heapManager.h */
#include <vendorcode/amd/agesa/f15tn/Proc/Common/CreateStruct.h>
#include <vendorcode/amd/agesa/f15tn/Proc/CPU/cpuEarlyInit.h>
/* These tables are optional and may be used to adjust memory timing settings */
#include <vendorcode/amd/agesa/f15tn/Proc/Mem/mm.h>
#include <vendorcode/amd/agesa/f15tn/Proc/Mem/mn.h>
/* Select the CPU family */
#define INSTALL_FAMILY_15_MODEL_1x_SUPPORT TRUE
/* Select the CPU socket type */
#define INSTALL_FS1_SOCKET_SUPPORT TRUE
#define INSTALL_FP2_SOCKET_SUPPORT TRUE
//#define BLDOPT_REMOVE_UDIMMS_SUPPORT TRUE
//#define BLDOPT_REMOVE_RDIMMS_SUPPORT TRUE
#define BLDOPT_REMOVE_LRDIMMS_SUPPORT TRUE
//#define BLDOPT_REMOVE_ECC_SUPPORT TRUE
#define BLDOPT_REMOVE_SRAT FALSE
#define BLDOPT_REMOVE_WHEA FALSE
#define BLDOPT_REMOVE_CRAT TRUE
/* Build configuration values here */
#define BLDCFG_AMD_PLATFORM_TYPE AMD_PLATFORM_MOBILE
#define BLDCFG_MEMORY_RDIMM_CAPABLE FALSE
#define BLDCFG_MEMORY_UDIMM_CAPABLE TRUE
#define BLDCFG_MEMORY_SODIMM_CAPABLE TRUE
#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING TRUE
#define BLDCFG_ENABLE_ECC_FEATURE TRUE
#define BLDCFG_ECC_SYNC_FLOOD FALSE
#define BLDCFG_UMA_ALLOCATION_MODE UMA_SPECIFIED
#define BLDCFG_UMA_ALLOCATION_SIZE 0x2000 /* (0x2000 << 16) = 512M */
#define BLDCFG_IOMMU_SUPPORT TRUE
#define BLDCFG_CFG_GNB_HD_AUDIO TRUE
/*
* The GPIO control is not well documented in AGESA, but is in the BKDG
*
* Eg. FANIN1/GPIO57 on datasheet means power-on default (Function0) is to route
* from this ball to hardware monitor as FAN1 tacho input. Selecting Function1
* routes this to the GPIO block instead. Seems ACPI GPIOs and related GEVENTs
* are mostly in Function1, sometimes Function2.
*
* Note that the GpioOut bit does not mean that the GPIO is an output. That bit
* actually controls the output value, so GpioOut means "default to set".
* PullUpB is an inverted logic, so setting this bit means we're actually
* disabling the internal pull-up. The PullDown bit is NOT inverted logic.
* The output driver can be disabled with the GpioOutEnB bit, which is again,
* inverted logic. To make the list more readable, we define a few local macros
* to state what we mean.
*/
#define OUTPUT_HIGH (GpioOut)
#define OUTPUT_LOW (0)
#define INPUT (GpioOutEnB)
#define PULL_UP (0)
#define PULL_DOWN (PullDown | PullUpB)
#define PULL_NONE (PullUpB)
GPIO_CONTROL lenovo_g505s_gpio[] = {
{57, Function1, OUTPUT_HIGH | PULL_NONE}, /* WLAN enable */
{-1}
};
#define BLDCFG_FCH_GPIO_CONTROL_LIST (lenovo_g505s_gpio)
/*
* These definitions could be moved to a common Hudson header, should we decide
* to provide our own, saner SCI mapping function
*/
#define GEVENT_PIN(gpe) ((gpe) + 0x40)
#define SCI_MAP_OHCI_12_0 0x58
#define SCI_MAP_OHCI_13_0 0x59
#define SCI_MAP_XHCI_10_0 0x78
#define SCI_MAP_PWRBTN 0x73
SCI_MAP_CONTROL lenovo_g505s_sci_map[] = {
{GEVENT_PIN(EC_SCI_GEVENT), EC_SCI_GPE},
{GEVENT_PIN(EC_LID_GEVENT), EC_LID_GPE},
{GEVENT_PIN(PCIE_GEVENT), PCIE_GPE},
{SCI_MAP_OHCI_12_0, PME_GPE},
{SCI_MAP_OHCI_13_0, PME_GPE},
{SCI_MAP_XHCI_10_0, PME_GPE},
{SCI_MAP_PWRBTN, PME_GPE},
};
#define BLDCFG_FCH_SCI_MAP_LIST (lenovo_g505s_sci_map)
/*
* Process the options...
* This file include MUST occur AFTER the user option selection settings.
* AGESA nonsense: Moving this include up will break AGESA.
*/
#include <PlatformInstall.h>
|
