1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
|
chip northbridge/intel/sandybridge
# IGD Displays
register "gfx" = "GMA_STATIC_DISPLAYS(0)"
register "spd_addresses" = "{0x50, 0, 0x52, 0}"
register "max_mem_clock_mhz" = "800"
register "ec_present" = "1"
register "usb3.hs_port_switch_mask" = "0xf"
register "usb3.mode" = "3"
register "usb3.preboot_support" = "1"
register "usb3.xhci_streams" = "1"
chip cpu/intel/model_206ax
device cpu_cluster 0 on end
register "acpi_c2" = "CPU_ACPI_C6"
register "acpi_c3" = "CPU_ACPI_DISABLED"
end
device domain 0 on
device ref host_bridge on end # host bridge
device ref peg10 on end # PCIe Bridge x16
device ref igd on end # vga controller
chip southbridge/intel/bd82x6x # Intel Series 6 Cougar Point PCH
# Enable all SATA ports 0-5
register "sata_port_map" = "0x3f"
# Set max SATA speed to 6.0 Gb/s (should be the default, anyway)
register "sata_interface_speed_support" = "0x3"
# TODO: Enable generic LPC decodes...
register "gen1_dec" = "0x001c02e1"
#register "gen2_dec" = "0x00000000"
#register "gen3_dec" = "0x00000000"
#register "gen4_dec" = "0x00000000"
# Disable root port coalescing
register "pcie_port_coalesce" = "false"
register "xhci_switchable_ports" = "0x0f"
register "superspeed_capable_ports" = "0x0f"
register "usb_port_config" = "{
{ 1, 0, 0 }, /* P0: lower left USB 3.0 (OC0) */
{ 1, 0, 0 }, /* P1: upper left USB 3.0 (OC0) */
{ 1, 0, 0 }, /* P2: lower right USB 3.0 (OC0) */
{ 1, 0, 0 }, /* P3: upper right USB 3.0 (OC0) */
{ 1, 0, 0 }, /* P4: lower USB 2.0 (OC0) */
{ 1, 0, 0 }, /* P5: upper USB 2.0 (OC0) */
{ 1, 0, 0 }, /* P6: front panel USB 2.0 (OC0) */
{ 1, 0, 0 }, /* P7: front panel USB 2.0 (OC0) */
{ 1, 0, 4 }, /* P8: internal USB 2.0 (OC4) */
{ 1, 0, 4 }, /* P9: internal USB 2.0 (OC4) */
{ 1, 0, 4 }, /* P10: internal USB 2.0 (OC4) */
{ 1, 0, 4 }, /* P11: internal USB 2.0 (OC4) */
{ 1, 0, 4 }, /* P12: internal USB 2.0 (OC4) */
{ 1, 0, 4 }, /* P13: internal USB 2.0 (OC4) */
}"
device ref xhci on end # USB 3.0 Controller
device ref mei1 on end # Management Engine Interface 1
device ref mei2 off end # Management Engine Interface 2
device ref me_ide_r off end # Management Engine IDE-R
device ref me_kt off end # Management Engine KT
device ref gbe on end # Intel Gigabit Ethernet
device ref ehci2 on end # USB2 EHCI #2
device ref hda on end # High Definition Audio
# Disabling 1c.0 might break IRQ settings as it enables port coalescing
# There are two mini PCIe x1 sockets, so one PCIe port is unrouted
device ref pcie_rp1 on end # PCIe Port #1 mini PCIe x1?
device ref pcie_rp2 on end # PCIe Port #2 mini PCIe x1?
device ref pcie_rp3 on end # PCIe Port #3 second Ethernet NIC
device ref pcie_rp4 on end # PCIe Port #4 third Ethernet NIC
device ref pcie_rp5 on end # PCIe Port #5 first Ethernet PHY
device ref pcie_rp6 on end # PCIe Port #6 FireWire
device ref pcie_rp7 on end # PCIe Port #7 PCIe x1
device ref pcie_rp8 on end # PCIe Port #8 mini PCIe x1?
device ref ehci1 on end # USB2 EHCI #1
device ref pci_bridge off end # PCI bridge
device ref lpc on #LPC bridge
chip superio/winbond/w83627dhg
device pnp 2e.0 off # Floppy
end
device pnp 2e.1 off # Parallel Port
end
device pnp 2e.2 on # Com1
io 0x60 = 0x3f8
irq 0x70 = 4
end
device pnp 2e.3 on # Com2
io 0x60 = 0x2f8
irq 0x70 = 3
end
device pnp 2e.5 off # Keyboard
end
device pnp 2e.6 off # SPI
end
device pnp 2e.307 off # GPIO 1
end
device pnp 2e.8 off # WDTO#, PLED
end
device pnp 2e.009 on # GPIO2 -- original firmware sets this on
end
device pnp 2e.109 on # GPIO3 -- original firmware sets this on
end
device pnp 2e.209 off # GPIO4
end
device pnp 2e.309 off # GPIO5
end
device pnp 2e.a off # ACPI
end
device pnp 2e.b off # HWM
end
device pnp 2e.c off # PECI, SST
end
end #superio/winbond/w83627dhg
chip ec/kontron/it8516e
# Set CPU Fan to 50°C, System Fan to 75%
register "default_fan_mode" = "{ IT8516E_MODE_THERMAL, IT8516E_MODE_PWM }"
register "default_fan_target" = "{ 50, 75 }"
# TODO: Check status when Linux runs
device pnp 20e.1 on # Com3
io 0x60 = 0x03e8
irq 0x70 = 4
end
device pnp 20e.2 on # Com4
io 0x60 = 0x02e8
irq 0x70 = 3
end
device pnp 20e.4 off # System Wakeup
end
device pnp 20e.5 on # Mouse
irq 0x70 = 12
end
device pnp 20e.6 on # Keyboard
io 0x60 = 0x0060
io 0x62 = 0x0064
irq 0x70 = 1
end
device pnp 20e.f off # Shared Memory
end
device pnp 20e.10 off # BRAM / RTC
end
device pnp 20e.11 on # PM channel 1
io 0x60 = 0x0062
io 0x62 = 0x0066
irq 0x70 = 0
end
device pnp 20e.12 on # PM channel 2
io 0x60 = 0x020c
io 0x62 = 0x020d
irq 0x70 = 0
end
device pnp 20e.17 off # PM channel 3
end
end #ec/kontron/it8516e
# TODO: TPM on 4e
end # LPC bridge
device ref sata1 on end # SATA Controller 1
device ref smbus on end # SMBus
device ref sata2 off end # SATA Controller 2
device ref thermal off end # Thermal
end
end
end
|
