1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <types.h>
#include <device/device.h>
#include <console/console.h>
#include <drivers/intel/gma/int15.h>
#include <option.h>
#include <stdio.h>
#include <superio/hwm5_conf.h>
#include <superio/nuvoton/common/hwm.h>
/* Hardware Monitor */
static u16 hwm_base = 0xa00;
#define FAN_CRUISE_CONTROL_DISABLED 0
#define FAN_CRUISE_CONTROL_SPEED 1
#define FAN_CRUISE_CONTROL_THERMAL 2
#define FAN_SPEED_5625 0
struct fan_speed {
u8 fan_in;
u16 fan_speed;
};
/* FANIN Target Speed Register */
/* FANIN = 337500 / RPM */
struct fan_speed fan_speeds[] = {
{ 0x3c, 5625 }, { 0x41, 5192 }, { 0x47, 4753 }, { 0x4e, 4326 },
{ 0x56, 3924 }, { 0x5f, 3552 }, { 0x69, 3214 }, { 0x74, 2909 },
{ 0x80, 2636 }, { 0x8d, 2393 }, { 0x9b, 2177 }, { 0xaa, 1985 },
{ 0xba, 1814 }, { 0xcb, 1662 }, { 0xdd, 1527 }, { 0xf0, 1406 }
};
struct temperature {
u8 deg_celsius;
u8 deg_fahrenheit;
};
struct temperature temperatures[] = {
{ 30, 86 }, { 33, 91 }, { 36, 96 }, { 39, 102 },
{ 42, 107 }, { 45, 113 }, { 48, 118 }, { 51, 123 },
{ 54, 129 }, { 57, 134 }, { 60, 140 }, { 63, 145 },
{ 66, 150 }, { 69, 156 }, { 72, 161 }, { 75, 167 }
};
static void hwm_setup(void)
{
unsigned int cpufan_control = 0, sysfan_control = 0;
unsigned int cpufan_speed = 0, sysfan_speed = 0;
unsigned int cpufan_temperature = 0, sysfan_temperature = 0;
cpufan_control = get_uint_option("cpufan_cruise_control", FAN_CRUISE_CONTROL_DISABLED);
cpufan_speed = get_uint_option("cpufan_speed", FAN_SPEED_5625);
sysfan_control = get_uint_option("sysfan_cruise_control", FAN_CRUISE_CONTROL_DISABLED);
sysfan_speed = get_uint_option("sysfan_speed", FAN_SPEED_5625);
nuvoton_hwm_select_bank(hwm_base, 0);
pnp_write_hwm5_index(hwm_base, 0x59, 0x20); /* Diode Selection */
pnp_write_hwm5_index(hwm_base, 0x5d, 0x0f); /* All Sensors Diode, not Thermistor */
nuvoton_hwm_select_bank(hwm_base, 4);
pnp_write_hwm5_index(hwm_base, 0x54, 0xf1); /* SYSTIN temperature offset */
pnp_write_hwm5_index(hwm_base, 0x55, 0x19); /* CPUTIN temperature offset */
pnp_write_hwm5_index(hwm_base, 0x56, 0xfc); /* AUXTIN temperature offset */
nuvoton_hwm_select_bank(hwm_base, 0x80); /* Default */
u8 fan_config = 0;
/* 00 FANOUT is Manual Mode */
/* 01 FANOUT is Thermal Cruise Mode */
/* 10 FANOUT is Fan Speed Cruise Mode */
switch (cpufan_control) {
case FAN_CRUISE_CONTROL_SPEED: fan_config |= (2 << 4); break;
case FAN_CRUISE_CONTROL_THERMAL: fan_config |= (1 << 4); break;
}
switch (sysfan_control) {
case FAN_CRUISE_CONTROL_SPEED: fan_config |= (2 << 2); break;
case FAN_CRUISE_CONTROL_THERMAL: fan_config |= (1 << 2); break;
}
/* This register must be written first */
pnp_write_hwm5_index(hwm_base, 0x04, fan_config);
switch (cpufan_control) {
case FAN_CRUISE_CONTROL_SPEED: /* CPUFANIN target speed */
printk(BIOS_DEBUG, "Fan Cruise Control setting CPU fan to %d RPM\n",
fan_speeds[cpufan_speed].fan_speed);
pnp_write_hwm5_index(hwm_base, 0x06, fan_speeds[cpufan_speed].fan_in);
break;
case FAN_CRUISE_CONTROL_THERMAL: /* CPUFANIN target temperature */
printk(BIOS_DEBUG, "Fan Cruise Control setting CPU fan to activation at %d deg C/%d deg F\n",
temperatures[cpufan_temperature].deg_celsius,
temperatures[cpufan_temperature].deg_fahrenheit);
pnp_write_hwm5_index(hwm_base, 0x06,
temperatures[cpufan_temperature].deg_celsius);
break;
}
switch (sysfan_control) {
case FAN_CRUISE_CONTROL_SPEED: /* SYSFANIN target speed */
printk(BIOS_DEBUG, "Fan Cruise Control setting system fan to %d RPM\n",
fan_speeds[sysfan_speed].fan_speed);
pnp_write_hwm5_index(hwm_base, 0x05, fan_speeds[sysfan_speed].fan_in);
break;
case FAN_CRUISE_CONTROL_THERMAL: /* SYSFANIN target temperature */
printk(BIOS_DEBUG, "Fan Cruise Control setting system fan to activation at %d deg C/%d deg F\n",
temperatures[sysfan_temperature].deg_celsius,
temperatures[sysfan_temperature].deg_fahrenheit);
pnp_write_hwm5_index(hwm_base, 0x05,
temperatures[sysfan_temperature].deg_celsius);
break;
}
pnp_write_hwm5_index(hwm_base, 0x0e, 0x02); /* Fan Output Step Down Time */
pnp_write_hwm5_index(hwm_base, 0x0f, 0x02); /* Fan Output Step Up Time */
pnp_write_hwm5_index(hwm_base, 0x47, 0xaf); /* FAN divisor register */
pnp_write_hwm5_index(hwm_base, 0x4b, 0x84); /* AUXFANIN speed divisor */
pnp_write_hwm5_index(hwm_base, 0x40, 0x01); /* Init, but no SMI# */
}
static void mainboard_enable(struct device *dev)
{
install_intel_vga_int15_handler(GMA_INT15_ACTIVE_LFP_INT_LVDS, GMA_INT15_PANEL_FIT_DEFAULT, GMA_INT15_BOOT_DISPLAY_DEFAULT, 3);
hwm_setup();
}
static void mainboard_init(void *chip_info)
{
int i;
struct device *dev;
for (i = 1; i <= 3; i++) {
char cmos_option_name[] = "ethernetx";
snprintf(cmos_option_name, sizeof(cmos_option_name),
"ethernet%01d", i);
unsigned int ethernet_disable = get_uint_option(cmos_option_name, 0);
if (!ethernet_disable)
continue;
printk(BIOS_DEBUG, "Disabling Ethernet NIC #%d\n", i);
dev = pcidev_on_root(28, i - 1);
if (dev == nullptr) {
printk(BIOS_ERR,
"Disabling Ethernet NIC: Cannot find 00:1c.%d!\n",
i - 1);
continue;
}
dev->enabled = 0;
}
}
struct chip_operations mainboard_ops = {
.init = mainboard_init,
.enable_dev = mainboard_enable,
};
|
