blob: b0fa2f2956e3794dc84d5e2cd99857233e65de2c (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
|
/*
* Copyright (C) 2016-2017 Intel Corporation
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but without any warranty; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <assert.h>
#include <bootmode.h>
#include <console/console.h>
#include <delay.h>
#include <device/i2c_simple.h>
#include <lib.h>
#include <soc/i2c.h>
#include <soc/reg_access.h>
#include "reg_access.h"
#include "gen1.h"
#include "gen2.h"
#include <spi_flash.h>
#include <vboot/vboot_common.h>
#include <vboot/vbnv.h>
int clear_recovery_mode_switch(void)
{
/* Nothing to do */
return 0;
}
int get_recovery_mode_switch(void)
{
return 0;
}
int get_write_protect_state(void)
{
/* Not write protected */
return 0;
}
void log_recovery_mode_switch(void)
{
}
void verstage_mainboard_init(void)
{
const struct reg_script *script;
/* Crypto Shield I2C Addresses:
*
* 0x29: AT97S3204T - TPM 1.2
* 0x50: ATAES132 - AES-128
* 0x60: ATECC108 - Elliptical Curve
* 0x64: ATSHA204 - SHA-256
* 0x68: DS3231M - RTC
*/
/* Determine the correct script for the board */
if (IS_ENABLED(CONFIG_GALILEO_GEN2))
script = gen2_i2c_init;
else
/* Determine which I2C address is in use */
script = (reg_legacy_gpio_read (R_QNC_GPIO_RGLVL_RESUME_WELL)
& GALILEO_DETERMINE_IOEXP_SLA_RESUMEWELL_GPIO)
? gen1_i2c_0x20_init : gen1_i2c_0x21_init;
/* Direct the I2C SDA and SCL signals to the Arduino connector */
reg_script_run(script);
}
void __attribute__((weak)) vboot_platform_prepare_reboot(void)
{
const struct reg_script *script;
/* Crypto Shield I2C Addresses:
*
* 0x29: AT97S3204T - TPM 1.2
* 0x50: ATAES132 - AES-128
* 0x60: ATECC108 - Elliptical Curve
* 0x64: ATSHA204 - SHA-256
* 0x68: DS3231M - RTC
*/
/* Determine the correct script for the board */
if (IS_ENABLED(CONFIG_GALILEO_GEN2))
script = gen2_tpm_reset;
else
/* Determine which I2C address is in use */
script = (reg_legacy_gpio_read (R_QNC_GPIO_RGLVL_RESUME_WELL)
& GALILEO_DETERMINE_IOEXP_SLA_RESUMEWELL_GPIO)
? gen1_tpm_reset_0x20 : gen1_tpm_reset_0x21;
/* Reset the TPM */
reg_script_run(script);
}
int vbnv_cmos_failed(void)
{
/* Indicate no failure until RTC failure bits are supported. */
return 0;
}
|
