1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2016 Intel Corp.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/* PCIe reset pin */
#define GEN1_PCI_RESET_RESUMEWELL_GPIO 3
/* Jumper J2 determines the slave address of Cypress I/O GPIO expander */
#define GALILEO_DETERMINE_IOEXP_SLA_RESUMEWELL_GPIO 5
static const struct reg_script gen1_gpio_init[] = {
/* Initialize the legacy GPIO controller */
REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGEN_CORE_WELL, 0x03),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGIO_CORE_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGLVL_CORE_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGTPE_CORE_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGTNE_CORE_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGGPE_CORE_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGSMI_CORE_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGTS_CORE_WELL, 0x03),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_CNMIEN_CORE_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGEN_RESUME_WELL, 0x3f),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGIO_RESUME_WELL, 0x21),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGLVL_RESUME_WELL, 0x14),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGTPE_RESUME_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGTNE_RESUME_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGGPE_RESUME_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGSMI_RESUME_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGTS_RESUME_WELL, 0x3f),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_RNMIEN_RESUME_WELL, 0x00),
/* Initialize the GPIO controller */
REG_GPIO_WRITE(GPIO_INTEN, 0),
REG_GPIO_WRITE(GPIO_INTSTATUS, 0),
REG_GPIO_WRITE(GPIO_SWPORTA_DR, 5),
REG_GPIO_WRITE(GPIO_SWPORTA_DDR, 0x15),
REG_GPIO_WRITE(GPIO_INTMASK, 0),
REG_GPIO_WRITE(GPIO_INTTYPE_LEVEL, 0),
REG_GPIO_WRITE(GPIO_INT_POLARITY, 0),
REG_GPIO_WRITE(GPIO_DEBOUNCE, 0),
REG_GPIO_WRITE(GPIO_LS_SYNC, 0),
/* Toggle the Cypress reset line */
REG_GPIO_OR(GPIO_SWPORTA_DR, BIT4),
REG_GPIO_AND(GPIO_SWPORTA_DR, ~BIT4),
REG_SCRIPT_END
};
static const struct reg_script gen1_i2c_0x20_init[] = {
/* Route I2C pins to Arduino header:
* Clear I2C_MUX (GPORT1_BIT5) to route I2C to Arduino Shield connector
*
* I2C_SDA -> ANALOG_A4
* I2C_SCL -> ANALOG_A5
*/
REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_SELECT, 1),
REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_DIR, ~BIT5),
REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_OUTPUT1, ~BIT5),
/* Set all GPIO expander pins connected to the Reset Button as inputs
* Configure RESET_N_SHLD (GPORT5_BIT0) and SW_RESET_N_SHLD
* (GPORT5_BIT1) as inputs
*/
REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_SELECT, 5),
REG_I2C_OR(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_DIR, BIT1 | BIT0),
REG_SCRIPT_END
};
static const struct reg_script gen1_i2c_0x21_init[] = {
/* Route I2C pins to Arduino header:
* Clear I2C_MUX (GPORT1_BIT5) to route I2C to Arduino Shield connector
*
* I2C_SDA -> ANALOG_A4
* I2C_SCL -> ANALOG_A5
*/
REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_SELECT, 1),
REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_DIR, ~BIT5),
REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_OUTPUT1, ~BIT5),
/* Set all GPIO expander pins connected to the Reset Button as inputs
* Configure RESET_N_SHLD (GPORT5_BIT0) and SW_RESET_N_SHLD
* (GPORT5_BIT1) as inputs
*/
REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_SELECT, 5),
REG_I2C_OR(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_DIR, BIT1 | BIT0),
REG_SCRIPT_END
};
|
