1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
|
/* SPDX-License-Identifier: GPL-2.0-only */
/* This file is part of the coreboot project. */
/* PCIe reset pin */
#define GEN1_PCI_RESET_RESUMEWELL_GPIO 3
/* Jumper J2 determines the slave address of Cypress I/O GPIO expander */
#define GALILEO_DETERMINE_IOEXP_SLA_RESUMEWELL_GPIO 5
static const struct reg_script gen1_gpio_init[] = {
/* Initialize the legacy GPIO controller */
REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGEN_CORE_WELL, 0x03),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGIO_CORE_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGLVL_CORE_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGTPE_CORE_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGTNE_CORE_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGGPE_CORE_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGSMI_CORE_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_CGTS_CORE_WELL, 0x03),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_CNMIEN_CORE_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGEN_RESUME_WELL, 0x3f),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGIO_RESUME_WELL, 0x21),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGLVL_RESUME_WELL, 0x14),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGTPE_RESUME_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGTNE_RESUME_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGGPE_RESUME_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGSMI_RESUME_WELL, 0x00),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_RGTS_RESUME_WELL, 0x3f),
REG_LEG_GPIO_WRITE(R_QNC_GPIO_RNMIEN_RESUME_WELL, 0x00),
/* Initialize the GPIO controller */
REG_GPIO_WRITE(GPIO_INTEN, 0),
REG_GPIO_WRITE(GPIO_INTSTATUS, 0),
REG_GPIO_WRITE(GPIO_SWPORTA_DR, 5),
REG_GPIO_WRITE(GPIO_SWPORTA_DDR, 0x15),
REG_GPIO_WRITE(GPIO_INTMASK, 0),
REG_GPIO_WRITE(GPIO_INTTYPE_LEVEL, 0),
REG_GPIO_WRITE(GPIO_INT_POLARITY, 0),
REG_GPIO_WRITE(GPIO_DEBOUNCE, 0),
REG_GPIO_WRITE(GPIO_LS_SYNC, 0),
/* Toggle the Cypress reset line */
REG_GPIO_OR(GPIO_SWPORTA_DR, BIT4),
REG_GPIO_AND(GPIO_SWPORTA_DR, ~BIT4),
REG_SCRIPT_END
};
static const struct reg_script gen1_hsuart0_0x20[] = {
/* Route UART0_TXD to LVL_TXD -> IO1 -> DIGITAL 1
* Set IO1_MUX (EXP.PORT3_5) output, low
* Set LVL_OE (GPIO_SUS2) output, high
*/
REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_SELECT, 3),
REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_DIR, ~BIT5),
REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_OUTPUT3, ~BIT5),
/* Route DIGITAL 0 -> IO0 -> LVL_RXD -> UART0_RXD
* Set IO0_MUX (EXP.PORT3_4) output, low
* Set LVL_OE (GPIO_SUS2) output, high
*/
REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_SELECT, 3),
REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_DIR, ~BIT4),
REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_OUTPUT3, ~BIT4),
REG_LEG_GPIO_OR(R_QNC_GPIO_RGEN_RESUME_WELL, BIT2),
REG_LEG_GPIO_AND(R_QNC_GPIO_RGIO_RESUME_WELL, ~BIT2),
REG_LEG_GPIO_OR(R_QNC_GPIO_RGLVL_RESUME_WELL, BIT2),
REG_SCRIPT_END
};
static const struct reg_script gen1_hsuart0_0x21[] = {
/* Route UART0_TXD to LVL_TXD -> IO1 -> DIGITAL 1
* Set IO1_MUX (EXP.PORT3_5) output, low
* Set LVL_OE (GPIO_SUS2) output, high
*/
REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_SELECT, 3),
REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_DIR, ~BIT5),
REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_OUTPUT3, ~BIT5),
/* Route DIGITAL 0 -> IO0 -> LVL_RXD -> UART0_RXD
* Set IO0_MUX (EXP.PORT3_4) output, low
* Set LVL_OE (GPIO_SUS2) output, high
*/
REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_SELECT, 3),
REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_DIR, ~BIT4),
REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_OUTPUT3, ~BIT4),
REG_LEG_GPIO_OR(R_QNC_GPIO_RGEN_RESUME_WELL, BIT2),
REG_LEG_GPIO_AND(R_QNC_GPIO_RGIO_RESUME_WELL, ~BIT2),
REG_LEG_GPIO_OR(R_QNC_GPIO_RGLVL_RESUME_WELL, BIT2),
REG_SCRIPT_END
};
static const struct reg_script gen1_i2c_0x20_init[] = {
/* Route I2C pins to Arduino header:
* Clear I2C_MUX (GPORT1_BIT5) to route I2C to Arduino Shield connector
*
* I2C_SDA -> ANALOG_A4
* I2C_SCL -> ANALOG_A5
*/
REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_SELECT, 1),
REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_DIR, ~BIT5),
REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_OUTPUT1, ~BIT5),
/* Set all GPIO expander pins connected to the Reset Button as inputs
* Configure RESET_N_SHLD (GPORT5_BIT0) and SW_RESET_N_SHLD
* (GPORT5_BIT1) as inputs
*/
REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_SELECT, 5),
REG_I2C_OR(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_DIR, BIT1 | BIT0),
REG_SCRIPT_END
};
static const struct reg_script gen1_i2c_0x21_init[] = {
/* Route I2C pins to Arduino header:
* Clear I2C_MUX (GPORT1_BIT5) to route I2C to Arduino Shield connector
*
* I2C_SDA -> ANALOG_A4
* I2C_SCL -> ANALOG_A5
*/
REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_SELECT, 1),
REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_DIR, ~BIT5),
REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_OUTPUT1, ~BIT5),
/* Set all GPIO expander pins connected to the Reset Button as inputs
* Configure RESET_N_SHLD (GPORT5_BIT0) and SW_RESET_N_SHLD
* (GPORT5_BIT1) as inputs
*/
REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_SELECT, 5),
REG_I2C_OR(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_DIR, BIT1 | BIT0),
REG_SCRIPT_END
};
static const struct reg_script gen1_tpm_reset_0x20[] = {
/* Reset the TPM using SW_RESET_N_SHLD (GPORT5_BIT1):
* low, output, delay, input
*/
REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_OUTPUT5, ~BIT1),
REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_SELECT, 5),
REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_DIR, ~BIT1),
TIME_DELAY_USEC(5),
REG_I2C_OR(GEN1_I2C_GPIO_EXP_0x20, GEN1_GPIO_EXP_PORT_DIR, BIT1),
REG_SCRIPT_END
};
static const struct reg_script gen1_tpm_reset_0x21[] = {
/* Reset the TPM using SW_RESET_N_SHLD (GPORT5_BIT1):
* low, output, delay, input
*/
REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_OUTPUT5, ~BIT1),
REG_I2C_WRITE(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_SELECT, 5),
REG_I2C_AND(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_DIR, ~BIT1),
TIME_DELAY_USEC(5),
REG_I2C_OR(GEN1_I2C_GPIO_EXP_0x21, GEN1_GPIO_EXP_PORT_DIR, BIT1),
REG_SCRIPT_END
};
|
