1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
|
#define ASSEMBLY 1
#define DEFAULT_CONSOLE_LOGLEVEL 8
#define MAXIMUM_CONSOLE_LOGLEVEL 8
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
#include <arch/cpu.h>
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "northbridge/amd/amdk8/debug.c"
#include <cpu/amd/model_fxx_rev.h>
#include "superio/nsc/pc87366/pc87366_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
#define SERIAL_DEV PNP_DEV(0x2e, PC87366_SP1)
static void hard_reset(void)
{
set_bios_reset();
/* enable cf9 */
pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
/* reset */
outb(0x0e, 0x0cf9);
}
static void soft_reset(void)
{
set_bios_reset();
pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
}
static void memreset_setup(void)
{
if (is_cpu_pre_c0()) {
/* Set the memreset low */
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 16);
/* Ensure the BIOS has control of the memory lines */
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 17);
} else {
/* Ensure the CPU has controll of the memory lines */
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 17);
}
}
static void memreset(int controllers, const struct mem_controller *ctrl)
{
if (is_cpu_pre_c0()) {
udelay(800);
/* Set memreset_high */
outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 16);
udelay(90);
}
}
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
/* nothing to do */
}
static inline int spd_read_byte(unsigned device, unsigned address)
{
return smbus_read_byte(device, address);
}
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/incoherent_ht.c"
#include "sdram/generic_sdram.c"
#include "mainboard/ibm/e325/resourcemap.c"
#include "cpu/amd/dualcore/dualcore.c"
#define FIRST_CPU 1
#define SECOND_CPU 1
#define TOTAL_CPUS (FIRST_CPU + SECOND_CPU)
static void main(unsigned long bist)
{
static const struct mem_controller cpu[] = {
#if FIRST_CPU
{
.node_id = 0,
.f0 = PCI_DEV(0, 0x18, 0),
.f1 = PCI_DEV(0, 0x18, 1),
.f2 = PCI_DEV(0, 0x18, 2),
.f3 = PCI_DEV(0, 0x18, 3),
.channel0 = { (0xa<<3)|0, (0xa<<3)|2, 0, 0 },
.channel1 = { (0xa<<3)|1, (0xa<<3)|3, 0, 0 },
},
#endif
#if SECOND_CPU
{
.node_id = 1,
.f0 = PCI_DEV(0, 0x19, 0),
.f1 = PCI_DEV(0, 0x19, 1),
.f2 = PCI_DEV(0, 0x19, 2),
.f3 = PCI_DEV(0, 0x19, 3),
.channel0 = { (0xa<<3)|4, (0xa<<3)|6, 0, 0 },
.channel1 = { (0xa<<3)|5, (0xa<<3)|7, 0, 0 },
},
#endif
};
int needs_reset;
unsigned nodeid;
if (bist == 0) {
k8_init_and_stop_secondaries();
}
/* Setup the console */
pc87366_enable_serial(SERIAL_DEV, TTYS0_BASE);
uart_init();
console_init();
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
#if 0
print_pci_devices();
#endif
setup_ibm_e325_resource_map();
#if 0
print_debug("after setting resource\n");
print_pci_devices();
#endif
needs_reset = setup_coherent_ht_domain();
needs_reset |= ht_setup_chain(PCI_DEV(0, 0x18, 0), 0xA0);
#if 0
print_debug("after ht stuff\n");
print_pci_devices();
#endif
if (needs_reset) {
print_info("ht reset -\r\n");
soft_reset();
}
#if 0
print_pci_devices();
#endif
enable_smbus();
#if 0
dump_spd_registers(&cpu[0]);
#endif
memreset_setup();
sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
#if 0
dump_pci_devices();
#endif
#if 0
dump_pci_device(PCI_DEV(0, 0x18, 2));
#endif
#if 0
/* Check the first 1M */
ram_check(0x00000000, 0x001000000);
#endif
}
|
