1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
|
/* SPDX-License-Identifier: GPL-2.0-or-later */
#include <baseboard/variants.h>
#include <delay.h>
#include <gpio.h>
#include <soc/gpio.h>
#include <soc/smi.h>
#include <stdlib.h>
#include <boardid.h>
#include <variant/gpio.h>
static const struct soc_amd_gpio gpio_set_stage_rom_pre_v3[] = {
/* PEN_POWER_EN - reset */
PAD_GPO(GPIO_5, LOW),
/* EC_FCH_WAKE_L */
PAD_WAKE(GPIO_24, PULL_UP, EDGE_LOW, S3_S4_S5),
/* PCIE_RST1_L - Variable timings (May remove) */
PAD_NF(GPIO_27, PCIE_RST1_L, PULL_NONE),
/* NVME_AUX_RESET_L */
PAD_GPO(GPIO_40, HIGH),
/* EN_PWR_TOUCHPAD_PS2 - reset */
PAD_GPO(GPIO_67, LOW),
/* EMMC_RESET - reset (default stuffing unused)*/
PAD_GPO(GPIO_68, HIGH),
/* EN_PWR_CAMERA - reset */
PAD_GPO(GPIO_76, LOW),
/* CLK_REQ0_L - WIFI */
PAD_NF(GPIO_92, CLK_REQ0_L, PULL_UP),
/* CLK_REQ1_L - SD Card */
PAD_NF(GPIO_115, CLK_REQ1_L, PULL_UP),
/* CLK_REQ4_L - SSD */
PAD_NF(GPIO_132, CLK_REQ4_L, PULL_UP),
/* BIOS_FLASH_WP_ODL */
PAD_GPI(GPIO_137, PULL_NONE),
/* USI_RESET - reset */
PAD_GPO(GPIO_140, HIGH),
/* SD_AUX_RESET_L */
PAD_GPO(GPIO_142, HIGH),
};
static const struct soc_amd_gpio gpio_set_stage_rom_v3[] = {
/* PEN_POWER_EN - reset */
PAD_GPO(GPIO_5, LOW),
/* EN_PWR_TOUCHPAD_PS2 - reset */
PAD_GPO(GPIO_13, LOW),
/* EC_FCH_WAKE_L */
PAD_WAKE(GPIO_24, PULL_UP, EDGE_LOW, S3_S4_S5),
/* PCIE_RST1_L - Variable timings (May remove) */
PAD_NF(GPIO_27, PCIE_RST1_L, PULL_NONE),
/* NVME_AUX_RESET_L */
PAD_GPO(GPIO_40, HIGH),
/* EMMC_RESET - reset (default stuffing unused)*/
PAD_GPO(GPIO_68, HIGH),
/* EN_PWR_CAMERA - reset */
PAD_GPO(GPIO_76, LOW),
/* CLK_REQ0_L - WIFI */
PAD_NF(GPIO_92, CLK_REQ0_L, PULL_UP),
/* CLK_REQ1_L - SD Card */
PAD_NF(GPIO_115, CLK_REQ1_L, PULL_UP),
/* CLK_REQ4_L - SSD */
PAD_NF(GPIO_132, CLK_REQ4_L, PULL_UP),
/* BIOS_FLASH_WP_ODL */
PAD_GPI(GPIO_137, PULL_NONE),
/* USI_RESET - reset */
PAD_GPO(GPIO_140, HIGH),
/* SD_AUX_RESET_L */
PAD_GPO(GPIO_142, HIGH),
};
static const struct soc_amd_gpio gpio_set_stage_ram[] = {
/* PWR_BTN_L */
PAD_NF(GPIO_0, PWR_BTN_L, PULL_UP),
/* SYS_RESET_L */
PAD_NF(GPIO_1, SYS_RESET_L, PULL_NONE),
/* PCIE_WAKE_L */
PAD_NF(GPIO_2, WAKE_L, PULL_UP),
/* PEN_DETECT_ODL */
PAD_GPI(GPIO_4, PULL_UP),
/* PEN_POWER_EN - Enabled*/
PAD_GPO(GPIO_5, HIGH),
/* FPMCU_INT_L */
PAD_WAKE(GPIO_6, PULL_UP, EDGE_LOW, S3_S4_S5),
/* I2S_SDIN */
PAD_NF(GPIO_7, ACP_I2S_SDIN, PULL_NONE),
/* I2S_LRCLK - Bit banged in depthcharge */
PAD_NF(GPIO_8, ACP_I2S_LRCLK, PULL_NONE),
/* TOUCHPAD_INT_ODL */
/* TODO: Make sure driver sets as wake source */
PAD_GPI(GPIO_9, PULL_UP),
/* S0iX SLP - (unused - goes to EC & FPMCU */
PAD_GPI(GPIO_10, PULL_UP),
/* FPMCU_RST_L */
PAD_GPO(GPIO_11, HIGH),
/* USI_INT_ODL */
PAD_GPI(GPIO_12, PULL_UP),
/* EN_PWR_TOUCHPAD_PS2 */
PAD_GPO(GPIO_13, HIGH),
/* BT_DISABLE */
PAD_GPO(GPIO_14, LOW),
/* USB_OC0_L - USB C0 + USB A0 */
PAD_NF(GPIO_16, USB_OC0_L, PULL_UP),
/* USB_OC1_L - USB C1 + USB A1 */
PAD_NF(GPIO_17, USB_OC1_L, PULL_UP),
/* WIFI_DISABLE */
PAD_GPO(GPIO_18, LOW),
/* EMMC_CMD */
PAD_NF(GPIO_21, EMMC_CMD, PULL_UP),
/* EC_FCH_SCI_ODL */
PAD_SCI(GPIO_22, PULL_UP, EDGE_LOW),
/* AC_PRES */
PAD_NF(GPIO_23, AC_PRES, PULL_UP),
/* EC_AP_INT_ODL (Sensor Framesync) */
PAD_GPI(GPIO_31, PULL_UP),
/* EN_PWR_FP */
PAD_GPO(GPIO_32, HIGH),
/* DMIC SEL */
/*
* Make sure Ext ROM Sharing is disabled before using this GPIO. Otherwise SPI flash
* access will be very slow.
*/
PAD_GPO(GPIO_67, LOW), // Select Camera 1 Dmic
/* EMMC_RESET */
PAD_GPO(GPIO_68, LOW),
/* FPMCU_BOOT0 - TODO: Check this */
PAD_GPO(GPIO_69, LOW),
/* EMMC_CLK */
PAD_NF(GPIO_70, EMMC_CLK, PULL_NONE),
/* EMMC_DATA4 */
PAD_NF(GPIO_74, EMMC_DATA4, PULL_NONE),
/* EMMC_DATA6 */
PAD_NF(GPIO_75, EMMC_DATA6, PULL_NONE),
/* EN_PWR_CAMERA */
PAD_GPO(GPIO_76, HIGH),
/* APU_EDP_BL_DISABLE TODP: Set low in depthcharge */
PAD_GPO(GPIO_85, HIGH),
/* EMMC_DATA7 */
PAD_NF(GPIO_87, EMMC_DATA7, PULL_NONE),
/* EMMC_DATA5 */
PAD_NF(GPIO_88, EMMC_DATA5, PULL_NONE),
/* EN_DEV_BEEP_L */
PAD_GPO(GPIO_89, HIGH),
/* Testpoint */
PAD_GPI(GPIO_90, PULL_UP),
/* EN_SPKR TODO: Verify driver enables this (add to ACPI) */
PAD_GPO(GPIO_91, LOW),
/* EMMC_DATA0 */
PAD_NF(GPIO_104, EMMC_DATA0, PULL_NONE),
/* EMMC_DATA1 */
PAD_NF(GPIO_105, EMMC_DATA1, PULL_NONE),
/* EMMC_DATA2 */
PAD_NF(GPIO_106, EMMC_DATA2, PULL_NONE),
/* EMMC_DATA3 */
PAD_NF(GPIO_107, EMMC_DATA3, PULL_NONE),
/* EMMC_DS */
PAD_NF(GPIO_109, EMMC_DS, PULL_NONE),
/* I2C2_SCL - USI/Touchpad */
PAD_NF(GPIO_113, I2C2_SCL, PULL_UP),
/* I2C2_SDA - USI/Touchpad */
PAD_NF(GPIO_114, I2C2_SDA, PULL_UP),
/* KBRST_L */
PAD_NF(GPIO_129, KBRST_L, PULL_UP),
/* EC_IN_RW_OD */
PAD_GPI(GPIO_130, PULL_UP),
/* DEV_BEEP_CODEC_IN (Dev beep Data out) */
PAD_GPI(GPIO_135, PULL_NONE),
/* DEV_BEEP_BCLK */
PAD_GPI(GPIO_139, PULL_NONE),
/* USI_RESET */
PAD_GPO(GPIO_140, LOW),
/* UART1_RXD - FPMCU */
PAD_NF(GPIO_141, UART1_RXD, PULL_NONE),
/* UART1_TXD - FPMCU */
PAD_NF(GPIO_143, UART1_TXD, PULL_NONE),
/* USI_REPORT_EN */
/* TODO: Driver resets this later. Do we want it high or low initially? */
PAD_GPO(GPIO_144, HIGH),
};
const __weak
struct soc_amd_gpio *variant_romstage_gpio_table(size_t *size)
{
uint32_t board_version;
if (!google_chromeec_cbi_get_board_version(&board_version) &&
(board_version >= CONFIG_VARIANT_MIN_BOARD_ID_V3_SCHEMATICS)) {
*size = ARRAY_SIZE(gpio_set_stage_rom_v3);
return gpio_set_stage_rom_v3;
}
*size = ARRAY_SIZE(gpio_set_stage_rom_pre_v3);
return gpio_set_stage_rom_pre_v3;
}
const __weak
struct soc_amd_gpio *variant_base_gpio_table(size_t *size)
{
*size = ARRAY_SIZE(gpio_set_stage_ram);
return gpio_set_stage_ram;
}
/*
* This function is still needed for boards that sets gevents above 23
* that will generate SCI or SMI. Normally this function
* points to a table of gevents and what needs to be set. The code that
* calls it was modified so that when this function returns NULL then the
* caller does nothing.
*/
const __weak struct sci_source *get_gpe_table(size_t *num)
{
return NULL;
}
static void wifi_power_reset_configure_active_low_power(void)
{
/*
* Configure WiFi GPIOs such that:
* - WIFI_AUX_RESET_L is configured first to assert PERST# to WiFi device.
* - Enable power to WiFi using EN_PWR_WIFI_L.
* - Wait for 50ms after power to WiFi is enabled.
* - Deassert WIFI_AUX_RESET_L.
*/
static const struct soc_amd_gpio v3_wifi_table[] = {
/* WIFI_AUX_RESET_L */
PAD_GPO(GPIO_86, LOW),
/* EN_PWR_WIFI_L */
PAD_GPO(GPIO_42, LOW),
};
program_gpios(v3_wifi_table, ARRAY_SIZE(v3_wifi_table));
mdelay(50);
gpio_set(GPIO_86, 1);
}
static void wifi_power_reset_configure_active_high_power(void)
{
/*
* When GPIO_42 is configured as active high for enabling WiFi power, WIFI_AUX_RESET_L
* gets pulled high because of external PU to PP3300_WIFI. Thus, EN_PWR_WIFI needs to be
* set low before driving it high to trigger a WiFi power cycle to meet PCIe
* requirements. Thus, configura GPIOs such that:
* - WIFI_AUX_RESET_L is configured first to assert PERST# to WiFi device
* - Disable power to WiFi.
* - Wait 10ms for WiFi power to go low.
* - Enable power to WiFi using EN_PWR_WIFI.
* - Deassert WIFI_AUX_RESET_L.
*/
static const struct soc_amd_gpio v3_wifi_table[] = {
/* WIFI_AUX_RESET_L */
PAD_GPO(GPIO_86, LOW),
/* EN_PWR_WIFI */
PAD_GPO(GPIO_42, LOW),
};
program_gpios(v3_wifi_table, ARRAY_SIZE(v3_wifi_table));
mdelay(10);
gpio_set(GPIO_42, 1);
mdelay(50);
gpio_set(GPIO_86, 1);
}
static void wifi_power_reset_configure_v3(uint32_t board_version)
{
if (board_version >= CONFIG_VARIANT_MIN_BOARD_ID_WIFI_POWER_ACTIVE_LOW)
wifi_power_reset_configure_active_low_power();
else
wifi_power_reset_configure_active_high_power();
}
static void wifi_power_reset_configure_pre_v3(void)
{
/*
* Configure WiFi GPIOs such that:
* - WIFI_AUX_RESET_L is configured first to assert PERST# to WiFi device.
* - Disable power to WiFi since GPIO_29 goes high on PWRGOOD but has a glitch on RESET#
* deassertion causing WiFi to enter a bad state.
* - Wait 10ms for WiFi power to go low.
* - Enable power to WiFi using EN_PWR_WIFI.
* - Wait for 50ms after power to WiFi is enabled.
* - Deassert WIFI_AUX_RESET_L.
*/
static const struct soc_amd_gpio pre_v3_wifi_table[] = {
/* WIFI_AUX_RESET_L */
PAD_GPO(GPIO_42, LOW),
/* EN_PWR_WIFI */
PAD_GPO(GPIO_29, LOW),
};
program_gpios(pre_v3_wifi_table, ARRAY_SIZE(pre_v3_wifi_table));
mdelay(10);
gpio_set(GPIO_29, 1);
mdelay(50);
gpio_set(GPIO_42, 1);
}
__weak void variant_pcie_power_reset_configure(void)
{
uint32_t board_version;
if (!google_chromeec_cbi_get_board_version(&board_version) &&
(board_version >= CONFIG_VARIANT_MIN_BOARD_ID_V3_SCHEMATICS))
wifi_power_reset_configure_v3(board_version);
else
wifi_power_reset_configure_pre_v3();
}
static const struct soc_amd_gpio gpio_sleep_table[] = {
/* PEN_POWER_EN */
PAD_GPO(GPIO_5, LOW),
/* PCIE_RST1_L */
PAD_GPO(GPIO_27, LOW),
/* NVME_AUX_RESET_L */
PAD_GPO(GPIO_40, LOW),
/* EN_PWR_CAMERA */
PAD_GPO(GPIO_76, LOW),
};
const __weak struct soc_amd_gpio *variant_sleep_gpio_table(size_t *size, int slp_typ)
{
*size = ARRAY_SIZE(gpio_sleep_table);
return gpio_sleep_table;
}
|