1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
|
/*
* This file is part of the coreboot project.
*
* Copyright 2014 Rockchip Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <device/mmio.h>
#include <boot/coreboot_tables.h>
#include <delay.h>
#include <device/device.h>
#include <device/i2c_simple.h>
#include <edid.h>
#include <gpio.h>
#include <soc/display.h>
#include <soc/grf.h>
#include <soc/soc.h>
#include <soc/pmu.h>
#include <soc/clock.h>
#include <soc/rk808.h>
#include <soc/spi.h>
#include <soc/i2c.h>
#include <symbols.h>
#include <vbe.h>
#include <vendorcode/google/chromeos/chromeos.h>
#include "board.h"
static void configure_usb(void)
{
gpio_output(GPIO(0, B, 3), 1); /* HOST1_PWR_EN */
gpio_output(GPIO(0, B, 4), 1); /* USBOTG_PWREN_H */
gpio_output(GPIO(7, C, 5), 1); /* 5V_DRV */
}
static void configure_sdmmc(void)
{
write32(&rk3288_grf->iomux_sdmmc0, IOMUX_SDMMC0);
/* use sdmmc0 io, disable JTAG function */
write32(&rk3288_grf->soc_con0, RK_CLRBITS(1 << 12));
/* Note: these power rail definitions are copied in romstage.c */
rk808_configure_ldo(4, 3300); /* VCCIO_SD */
rk808_configure_ldo(5, 3300); /* VCC33_SD */
gpio_input(GPIO(7, A, 5)); /* SD_DET */
}
static void configure_emmc(void)
{
write32(&rk3288_grf->iomux_emmcdata, IOMUX_EMMCDATA);
write32(&rk3288_grf->iomux_emmcpwren, IOMUX_EMMCPWREN);
write32(&rk3288_grf->iomux_emmccmd, IOMUX_EMMCCMD);
gpio_output(GPIO(2, B, 1), 1); /* EMMC_RST_L */
}
static void configure_codec(void)
{
write32(&rk3288_grf->iomux_i2c2, IOMUX_I2C2); /* CODEC I2C */
i2c_init(2, 400*KHz); /* CODEC I2C */
write32(&rk3288_grf->iomux_i2s, IOMUX_I2S);
write32(&rk3288_grf->iomux_i2sclk, IOMUX_I2SCLK);
rk808_configure_ldo(6, 1800); /* VCC18_CODEC */
/* AUDIO IO domain 1.8V voltage selection */
write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 6));
rkclk_configure_i2s(12288000);
}
static void configure_vop(void)
{
write32(&rk3288_grf->iomux_lcdc, IOMUX_LCDC);
/* lcdc(vop) iodomain select 1.8V */
write32(&rk3288_grf->io_vsel, RK_SETBITS(1 << 0));
gpio_output(GPIO(2, B, 5), 1); /* AVDD_1V8_DISP_EN */
rk808_configure_ldo(7, 2500); /* VCC10_LCD_PWREN_H */
gpio_output(GPIO(7, B, 6), 1); /* LCD_EN */
rk808_configure_switch(1, 1); /* VCC33_LCD */
/* enable edp HPD */
gpio_input_pulldown(GPIO(7, B, 3));
write32(&rk3288_grf->iomux_edp_hotplug, IOMUX_EDP_HOTPLUG);
}
static void mainboard_init(struct device *dev)
{
gpio_output(GPIO_RESET, 0);
configure_usb();
configure_sdmmc();
configure_emmc();
configure_codec();
configure_vop();
}
static void mainboard_enable(struct device *dev)
{
dev->ops->init = &mainboard_init;
}
struct chip_operations mainboard_ops = {
.enable_dev = mainboard_enable,
};
void lb_board(struct lb_header *header)
{
struct lb_range *dma;
dma = (struct lb_range *)lb_new_record(header);
dma->tag = LB_TAG_DMA;
dma->size = sizeof(*dma);
dma->range_start = (uintptr_t)_dma_coherent;
dma->range_size = REGION_SIZE(dma_coherent);
}
void mainboard_power_on_backlight(void)
{
gpio_output(GPIO(2, B, 4), 1); /* BL_PWR_EN */
mdelay(120);
gpio_output(GPIO(7, A, 0), 1); /* LCD_BL */
mdelay(10);
gpio_output(GPIO_BACKLIGHT, 1); /* BL_EN */
}
|
