1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Imagination Technologies
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of
* the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*/
#include <arch/io.h>
#include <stdint.h>
#include <soc/clocks.h>
#include <console/console.h>
#define GPIO_BIT_EN_ADDR(bank) (0xB8101C00 + 0x200 + (0x24 * (bank)))
/* MFIO definitions for UART0/1 */
#define UART1_RXD_MFIO 59
#define UART1_TXD_MFIO 60
#define UART0_RXD_MFIO 55
#define UART0_TXD_MFIO 56
#define UART0_RTS_MFIO 57
#define UART0_CTS_MFIO 58
/* MFIO definitions for SPIM */
#define SPIM1_D0_TXD_MFIO 5
#define SPIM1_D1_RXD_MFIO 4
#define SPIM1_MCLK_MFIO 3
#define SPIM1_D2_MFIO 6
#define SPIM1_D3_MFIO 7
#define SPIM1_CS0_MFIO 0
static void uart1_mfio_setup(void)
{
u32 reg, mfio_mask;
/*
* Disable GPIO for UART1 MFIOs
* All UART MFIOs have MFIO/16 = 3, therefore we use GPIO pad 3
* This is the primary function (0) of these MFIOs and therfore there
* is no need to set up a function number in the corresponding
* function select register.
*/
reg = read32(GPIO_BIT_EN_ADDR(3));
mfio_mask = 1 << (UART1_RXD_MFIO % 16);
mfio_mask |= 1 << (UART1_TXD_MFIO % 16);
/* Clear relevant bits */
reg &= ~mfio_mask;
/*
* Set corresponding bits in the upper half word
* in order to be able to modify the chosen pins
*/
reg |= mfio_mask << 16;
write32(GPIO_BIT_EN_ADDR(3), reg);
}
static void spim1_mfio_setup(void)
{
u32 reg, mfio_mask;
/*
* Disable GPIO for SPIM1 MFIOs
* All SPFI1 MFIOs have MFIO/16 = 0, therefore we use GPIO pad 0
* This is the primary function (0) of these MFIOs and therfore there
* is no need to set up a function number in the corresponding
* function select register.
*/
reg = read32(GPIO_BIT_EN_ADDR(0));
/* Disable GPIO for UART0 MFIOs */
mfio_mask = 1 << (SPIM1_D0_TXD_MFIO % 16);
mfio_mask |= 1 << (SPIM1_D1_RXD_MFIO % 16);
mfio_mask |= 1 << (SPIM1_MCLK_MFIO % 16);
mfio_mask |= 1 << (SPIM1_D2_MFIO % 16);
mfio_mask |= 1 << (SPIM1_D3_MFIO % 16);
/* TODO: for the moment it only sets up CS0 (NOR) */
/* There is no need for other CS lines in Coreboot */
mfio_mask |= 1 << (SPIM1_CS0_MFIO % 16);
/* Clear relevant bits */
reg &= ~mfio_mask;
/*
* Set corresponding bits in the upper half word
* in order to be able to modify the chosen pins
*/
reg |= mfio_mask << 16;
write32(GPIO_BIT_EN_ADDR(0), reg);
}
static int init_clocks(void)
{
int ret;
/*
* Set up dividers for peripherals before setting up PLLs
* in order to not over-clock them when enabling PLLs
*/
/* System PLL divided by 2 -> 400 MHz */
/* The same frequency will be the input frequency for the SPFI block */
system_clk_setup(1);
/* System clock divided by 8 -> 50 MHz */
ret = usb_clk_setup(7, 2, 7);
if (ret != CLOCKS_OK)
return ret;
/* System PLL divided by 7 divided by 62 -> 1.8433 Mhz */
uart1_clk_setup(6, 61);
/* Setup system PLL at 800 MHz */
ret = sys_pll_setup(2, 1);
if (ret != CLOCKS_OK)
return ret;
/* Setup MIPS PLL at 550 MHz */
ret = mips_pll_setup(2, 1, 13, 275);
if (ret != CLOCKS_OK)
return ret;
return CLOCKS_OK;
}
static void bootblock_mainboard_init(void)
{
if (!init_clocks()) {
/* Disable GPIO on the peripheral lines */
uart1_mfio_setup();
printk(BIOS_INFO, "Urara board: UART initialized!\n");
spim1_mfio_setup();
}
}
|
