1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2015-2016 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <chip.h>
#include <amdblocks/agesawrapper.h>
#include <boardid.h>
#include <gpio.h>
#include <console/console.h>
#include <soc/pci_devs.h>
#define DIMMS_PER_CHANNEL 1
#if DIMMS_PER_CHANNEL > MAX_DIMMS_PER_CH
#error "Too many DIMM sockets defined for the mainboard"
#endif
static const PSO_ENTRY DDR4PlatformMemoryConfiguration[] = {
DRAM_TECHNOLOGY(ANY_SOCKET, DDR4_TECHNOLOGY),
NUMBER_OF_DIMMS_SUPPORTED(ANY_SOCKET, ANY_CHANNEL, DIMMS_PER_CHANNEL),
NUMBER_OF_CHANNELS_SUPPORTED(ANY_SOCKET, MAX_DRAM_CH),
MOTHER_BOARD_LAYERS(LAYERS_6),
MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL,
0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00),
CKE_TRI_MAP(ANY_SOCKET, ANY_CHANNEL, 0xff, 0xff, 0xff, 0xff),
ODT_TRI_MAP(ANY_SOCKET, ANY_CHANNEL, 0xff, 0xff, 0xff, 0xff),
CS_TRI_MAP(ANY_SOCKET, ANY_CHANNEL,
0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00),
PSO_END
};
/* TODO: Remove when no longer needed */
static const PSO_ENTRY DDR4LiaraMemoryConfiguration[] = {
DRAM_TECHNOLOGY(ANY_SOCKET, DDR4_TECHNOLOGY),
NUMBER_OF_DIMMS_SUPPORTED(ANY_SOCKET, ANY_CHANNEL, DIMMS_PER_CHANNEL),
NUMBER_OF_CHANNELS_SUPPORTED(ANY_SOCKET, MAX_DRAM_CH),
MOTHER_BOARD_LAYERS(LAYERS_6),
MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL,
0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00),
CKE_TRI_MAP(ANY_SOCKET, ANY_CHANNEL, 0xff, 0xff, 0xff, 0xff),
ODT_TRI_MAP(ANY_SOCKET, ANY_CHANNEL, 0xff, 0xff, 0xff, 0xff),
CS_TRI_MAP(ANY_SOCKET, ANY_CHANNEL,
0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00),
TBLDRV_CONFIG_TO_OVERRIDE(DIMMS_PER_CHANNEL, ANY_SPEED, VOLT_ANY_,
ANY_),
TBLDRV_CONFIG_ENTRY_SLOWACCMODE(1),
PSO_END
};
void OemPostParams(AMD_POST_PARAMS *PostParams)
{
if ((IS_ENABLED(CONFIG_BOARD_GOOGLE_LIARA)) && (board_id() <= 4))
PostParams->MemConfig.PlatformMemoryConfiguration =
(PSO_ENTRY *)DDR4LiaraMemoryConfiguration;
else
PostParams->MemConfig.PlatformMemoryConfiguration =
(PSO_ENTRY *)DDR4PlatformMemoryConfiguration;
/*
* Bank interleaving is enabled by default in AGESA. However, from AMD's
* explanation, bank interleaving is really chip select interleave,
* requiring 2 chip select arriving to the DIMM (rank interleaving). As
* both kahlee and grunt are hardware limited to a single chip select
* arriving at the DIMM, interleave will not work. This causes AGESA to
* throw a warning. To avoid the warning, interleaving needs to be
* disabled.
*/
PostParams->MemConfig.EnableBankIntlv = FALSE;
}
void set_board_env_params(GNB_ENV_CONFIGURATION *params)
{
const struct soc_amd_stoneyridge_config *cfg;
const struct device *dev = dev_find_slot(0, GNB_DEVFN);
if (!dev || !dev->chip_info) {
printk(BIOS_WARNING, "Warning: Cannot find SoC devicetree config\n");
return;
}
cfg = dev->chip_info;
if (cfg->lvds_poseq_blon_to_varybl && cfg->lvds_poseq_varybl_to_blon) {
/*
* GPIO 133 - Backlight enable (active low)
* Pass control of the backlight to the video BIOS
*/
gpio_set(GPIO_133, 0);
printk(BIOS_INFO, "Change panel init timing\n");
params->LvdsPowerOnSeqVaryBlToBlon =
cfg->lvds_poseq_varybl_to_blon;
params->LvdsPowerOnSeqBlonToVaryBl =
cfg->lvds_poseq_blon_to_varybl;
printk(BIOS_INFO, "LvdsPowerOnSeqVaryBlToBlon: %dms\n",
(params->LvdsPowerOnSeqVaryBlToBlon)*4);
printk(BIOS_INFO, "LvdsPowerOnSeqBlonToVaryBl: %dms\n",
(params->LvdsPowerOnSeqBlonToVaryBl)*4);
}
params->EDPv1_4VSMode = EDP_VS_HIGH_VDIFF_MODE;
}
|
