1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
|
/*
* This file is part of the coreboot project.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <AGESA.h>
#include <northbridge/amd/agesa/BiosCallOuts.h>
#include <northbridge/amd/agesa/state_machine.h>
#include <FchPlatform.h>
#include <stdlib.h>
#include "imc.h"
const BIOS_CALLOUT_STRUCT BiosCallouts[] =
{
{AGESA_DO_RESET, agesa_Reset },
{AGESA_READ_SPD, agesa_ReadSpd_from_cbfs },
{AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
{AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp },
{AGESA_GET_IDS_INIT_DATA, agesa_EmptyIdsInitData },
{AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess },
{AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
{AGESA_GNB_GFX_GET_VBIOS_IMAGE, agesa_GfxGetVbiosImage }
};
const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
/**
* ALC272 Verb Table
*/
const CODEC_ENTRY Alc272_VerbTbl[] = {
{0x11, 0x411111F0}, // - SPDIF_OUT2
{0x12, 0x411111F0}, // - DMIC_1/2
{0x13, 0x411111F0}, // - DMIC_3/4
{0x14, 0x411111F0}, // Port D - LOUT1
{0x15, 0x01011050}, // Port A - LOUT2 Explorer 2x DAC
{0x16, 0x411111F0}, //
{0x17, 0x411111F0}, // Port H - MONO
{0x18, 0x01a11840}, // Port B - MIC1
{0x19, 0x411111F0}, // Port F - MIC2
{0x1a, 0x01811030}, // Port C - LINE1
{0x1b, 0x01811020}, // Port E - LINE2 Explorer 2x ADC
{0x1d, 0x40130605}, // - PCBEEP
{0x1e, 0x411111F0}, // - SPDIF_OUT1
{0x21, 0x01211010}, // Port I - HPOUT
{0xff, 0xffffffff}
};
static const CODEC_TBL_LIST CodecTableList[] =
{
{0x10ec0272, (CODEC_ENTRY*)&Alc272_VerbTbl[0]},
{(UINT32)0x0FFFFFFFF, (CODEC_ENTRY*)0x0FFFFFFFFUL}
};
#define FAN_INPUT_INTERNAL_DIODE 0
#define FAN_INPUT_TEMP0 1
#define FAN_INPUT_TEMP1 2
#define FAN_INPUT_TEMP2 3
#define FAN_INPUT_TEMP3 4
#define FAN_INPUT_TEMP0_FILTER 5
#define FAN_INPUT_ZERO 6
#define FAN_INPUT_DISABLED 7
#define FAN_AUTOMODE (1 << 0)
#define FAN_LINEARMODE (1 << 1)
#define FAN_STEPMODE ~(1 << 1)
#define FAN_POLARITY_HIGH (1 << 2)
#define FAN_POLARITY_LOW ~(1 << 2)
/* Normally, 4-wire fan runs at 25KHz and 3-wire fan runs at 100Hz */
#define FREQ_28KHZ 0x0
#define FREQ_25KHZ 0x1
#define FREQ_23KHZ 0x2
#define FREQ_21KHZ 0x3
#define FREQ_29KHZ 0x4
#define FREQ_18KHZ 0x5
#define FREQ_100HZ 0xF7
#define FREQ_87HZ 0xF8
#define FREQ_58HZ 0xF9
#define FREQ_44HZ 0xFA
#define FREQ_35HZ 0xFB
#define FREQ_29HZ 0xFC
#define FREQ_22HZ 0xFD
#define FREQ_14HZ 0xFE
#define FREQ_11HZ 0xFF
/* Hardware Monitor Fan Control
* Hardware limitation:
* HWM failed to read the input temperature via I2C,
* if other software switches the I2C switch by mistake or intention.
* We recommend using IMC to control Fans, instead of HWM.
*/
static void oem_fan_control(FCH_DATA_BLOCK *FchParams)
{
/* Enable IMC fan control, the recommended way */
if (CONFIG(HUDSON_IMC_FWM)) {
imc_reg_init();
/* HwMonitorEnable = TRUE && HwmFchtsiAutoOpll ==FALSE to call FchECfancontrolservice */
FchParams->Hwm.HwMonitorEnable = TRUE;
FchParams->Hwm.HwmFchtsiAutoPoll = FALSE;/* 0 disable, 1 enable TSI Auto Polling */
FchParams->Imc.ImcEnable = TRUE;
FchParams->Hwm.HwmControl = 1; /* 1 IMC, 0 HWM */
FchParams->Imc.ImcEnableOverWrite = 1; /* 2 disable IMC, 1 enable IMC, 0 following hw strap setting */
LibAmdMemFill(&(FchParams->Imc.EcStruct), 0, sizeof(FCH_EC), FchParams->StdHeader);
/* Thermal Zone Parameter */
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg0 = 0x00;
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg1 = 0x00; /* Zone */
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg2 = 0x3d; //BIT0 | BIT2 | BIT5;
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg3 = 0x4e;//6 | BIT3;
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg4 = 0x00;
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg5 = 0x04;
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg6 = 0x9a; /* SMBUS Address for SMBUS based temperature sensor such as SB-TSI and ADM1032 */
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg7 = 0x01;
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg8 = 0x01; /* PWM stepping rate in unit of PWM level percentage */
FchParams->Imc.EcStruct.MsgFun81Zone0MsgReg9 = 0x00;
/* IMC Fan Policy temperature thresholds */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg0 = 0x00;
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg1 = 0x00; /* Zone */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg2 = 50; /*AC0 threshold in Celsius */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg3 = 45; /*AC1 threshold in Celsius */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg4 = 40; /*AC2 threshold in Celsius */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg5 = 0xff; /*AC3 threshold in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg6 = 0xff; /*AC4 threshold in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg7 = 0xff; /*AC5 threshold in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg8 = 0xff; /*AC6 threshold in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgReg9 = 0xff; /*AC7 lowest threshold in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegA = 0x4b; /*critical threshold* in Celsius, 0xFF is not define */
FchParams->Imc.EcStruct.MsgFun83Zone0MsgRegB = 0x00;
/* IMC Fan Policy PWM Settings */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg0 = 0x00;
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg1 = 0x00; /* Zone */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg2 = 100; /* AL0 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg3 = 99; /* AL1 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg4 = 98; /* AL2 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg5 = 0xff; /* AL3 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg6 = 0xff; /* AL4 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg7 = 0xff; /* AL5 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg8 = 0xff; /* AL6 percentage */
FchParams->Imc.EcStruct.MsgFun85Zone0MsgReg9 = 0xff; /* AL7 percentage */
FchParams->Imc.EcStruct.IMCFUNSupportBitMap = 0x111;//BIT0 | BIT4 |BIT8;
/* NOTE:
* FchInitLateHwm will overwrite the EcStruct with EcDefaultMessage,
* AGESA puts EcDefaultMessage as global data in ROM, so we can't overwrite it.
* So we remove it from AGESA code. Please See FchInitLateHwm.
*/
} else {
/* HWM fan control, the way not recommended */
FchParams->Imc.ImcEnable = FALSE;
FchParams->Hwm.HwMonitorEnable = TRUE;
FchParams->Hwm.HwmFchtsiAutoPoll = TRUE;/* 1 enable, 0 disable TSI Auto Polling */
}
}
void board_FCH_InitReset(struct sysinfo *cb_NA, FCH_RESET_DATA_BLOCK *FchParams_reset)
{
}
void board_FCH_InitEnv(struct sysinfo *cb_NA, FCH_DATA_BLOCK *FchParams_env)
{
/* Azalia Controller OEM Codec Table Pointer */
FchParams_env->Azalia.AzaliaOemCodecTablePtr = (CODEC_TBL_LIST *)(&CodecTableList[0]);
FchParams_env->Imc.ImcEnable = FALSE;
FchParams_env->Hwm.HwMonitorEnable = FALSE;
FchParams_env->Hwm.HwmFchtsiAutoPoll = FALSE;/* 1 enable, 0 disable TSI Auto Polling */
/* Fan Control */
oem_fan_control(FchParams_env);
}
|
