1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Alec Ari <neotheuser@ymail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <arch/io.h>
#include <device/pci_ops.h>
#include <device/pci_def.h>
#include <southbridge/amd/sb700/sb700.h>
#include <southbridge/amd/sb700/smbus.h>
#include <southbridge/amd/rs780/rs780.h>
void set_pcie_dereset(void)
{
u8 byte;
u16 word;
struct device *sm_dev;
/* set 0 to bit1 :disable GPM9 as SLP_S2 output */
/* set 0 to bit2 :disable GPM8 as AZ_RST output */
byte = pm_ioread(0x8d);
byte &= ~((1 << 1) | (1 << 2));
pm_iowrite(0x8d, byte);
/* set the GPM8 and GPM9 output enable and the value to 1 */
byte = pm_ioread(0x94);
byte &= ~((1 << 2) | (1 << 3));
byte |= ((1 << 0) | (1 << 1));
pm_iowrite(0x94, byte);
/* set the GPIO65 output enable and the value is 1 */
sm_dev = pcidev_on_root(0x14, 0);
word = pci_read_config16(sm_dev, 0x7e);
word |= (1 << 0);
word &= ~(1 << 4);
pci_write_config16(sm_dev, 0x7e, word);
}
void set_pcie_reset(void)
{
u8 byte;
u16 word;
struct device *sm_dev;
/* set 0 to bit1 :disable GPM9 as SLP_S2 output */
/* set 0 to bit2 :disable GPM8 as AZ_RST output */
byte = pm_ioread(0x8d);
byte &= ~((1 << 1) | (1 << 2));
pm_iowrite(0x8d, byte);
/* set the GPM8 and GPM9 output enable and the value to 0 */
byte = pm_ioread(0x94);
byte &= ~((1 << 2) | (1 << 3));
byte &= ~((1 << 0) | (1 << 1));
pm_iowrite(0x94, byte);
/* set the GPIO65 output enable and the value is 0 */
sm_dev = pcidev_on_root(0x14, 0);
word = pci_read_config16(sm_dev, 0x7e);
word &= ~(1 << 0);
word &= ~(1 << 4);
pci_write_config16(sm_dev, 0x7e, word);
}
/*
* dev3 does not exist on ma785gm
*/
int is_dev3_present(void)
{
return 0;
}
/*
* set gpio40 gfx
*/
static void set_gpio40_gfx(void)
{
u8 byte;
// u16 word;
u32 dword;
struct device *sm_dev;
/* disable the GPIO40 as CLKREQ2# function */
byte = pm_ioread(0xd3);
byte &= ~(1 << 7);
pm_iowrite(0xd3, byte);
/* disable the GPIO40 as CLKREQ3# function */
byte = pm_ioread(0xd4);
byte &= ~(1 << 0);
pm_iowrite(0xd4, byte);
/* enable pull up for GPIO68 */
byte = pm2_ioread(0xf1);
byte &= ~(1 << 4);
pm2_iowrite(0xf1, byte);
/* access the smbus extended register */
sm_dev = pcidev_on_root(0x14, 0);
/* set the gfx to 1x16 lanes */
printk(BIOS_INFO, "Dev3 is not present. GFX Configuration is One x16 slot\n");
/* when the gpio40 is configured as GPIO, this will enable the output */
pci_write_config32(sm_dev, 0xf8, 0x4);
dword = pci_read_config32(sm_dev, 0xfc);
dword &= ~(1 << 10);
/* When the gpio40 is configured as GPIO, this will represent the output value*/
/* 1 :enable two x8 , 0 : master slot enable only */
dword &= ~(1 << 26);
pci_write_config32(sm_dev, 0xfc, dword);
}
/*************************************************
* enable the dedicated function in ma785gm board.
* This function called early than rs780_enable.
*************************************************/
static void mainboard_enable(struct device *dev)
{
printk(BIOS_INFO, "Mainboard MA785GM-US2H Enable. dev=0x%p\n", dev);
set_pcie_dereset();
/* get_ide_dma66(); */
set_gpio40_gfx();
}
struct chip_operations mainboard_ops = {
.enable_dev = mainboard_enable,
};
|
