1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
|
#define ASSEMBLY 1
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
#include "southbridge/intel/i82801er/i82801er_early_smbus.c"
#include "northbridge/intel/E7520/raminit.h"
#include "superio/winbond/w83627hf/w83627hf.h"
#include "cpu/x86/lapic/boot_cpu.c"
#include "cpu/x86/mtrr/earlymtrr.c"
#include "debug.c"
#include "watchdog.c"
#include "reset.c"
#include "s2850_fixups.c"
#include "superio/winbond/w83627hf/w83627hf_early_init.c"
#include "northbridge/intel/E7520/memory_initialized.c"
#include "cpu/x86/bist.h"
#define SIO_GPIO_BASE 0x680
#define SIO_XBUS_BASE 0x4880
#define CONSOLE_SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
#define HIDDEN_SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP2)
#define DEVPRES_CONFIG ( \
DEVPRES_D0F0 | \
DEVPRES_D1F0 | \
DEVPRES_D2F0 | \
DEVPRES_D3F0 | \
DEVPRES_D4F0 | \
DEVPRES_D6F0 | \
0 )
#define DEVPRES1_CONFIG (DEVPRES1_D0F1 | DEVPRES1_D8F0)
#define RECVENA_CONFIG 0x0808090a
#define RECVENB_CONFIG 0x0808090a
//void udelay(int usecs)
//{
// int i;
// for(i = 0; i < usecs; i++)
// outb(i&0xff, 0x80);
//}
#if 0
static void hard_reset(void)
{
/* enable cf9 */
pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
/* reset */
outb(0x0e, 0x0cf9);
}
#endif
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
/* nothing to do */
}
static inline int spd_read_byte(unsigned device, unsigned address)
{
return smbus_read_byte(device, address);
}
#include "northbridge/intel/E7520/raminit.c"
#include "sdram/generic_sdram.c"
static void main(unsigned long bist)
{
/*
*
*
*/
static const struct mem_controller mch[] = {
{
.node_id = 0,
.f0 = PCI_DEV(0, 0x00, 0),
.f1 = PCI_DEV(0, 0x00, 1),
.f2 = PCI_DEV(0, 0x00, 2),
.f3 = PCI_DEV(0, 0x00, 3),
.channel0 = {(0xa<<3)|3, (0xa<<3)|2, (0xa<<3)|1, (0xa<<3)|0, },
.channel1 = {(0xa<<3)|7, (0xa<<3)|6, (0xa<<3)|5, (0xa<<3)|4, },
}
};
if (bist == 0) {
/* Skip this if there was a built in self test failure */
early_mtrr_init();
if (memory_initialized()) {
asm volatile ("jmp __cpu_reset");
}
}
/* Setup the console */
outb(0x87,0x2e);
outb(0x87,0x2e);
pnp_write_config(CONSOLE_SERIAL_DEV, 0x24, 0x84 | (1 << 6));
w83627hf_enable_dev(CONSOLE_SERIAL_DEV, TTYS0_BASE);
uart_init();
console_init();
/* Halt if there was a built in self test failure */
// report_bist_failure(bist);
/* MOVE ME TO A BETTER LOCATION !!! */
/* config LPC decode for flash memory access */
device_t dev;
dev = pci_locate_device(PCI_ID(0x8086, 0x24d0), 0);
if (dev == PCI_DEV_INVALID) {
die("Missing ich5?");
}
pci_write_config32(dev, 0xe8, 0x00000000);
pci_write_config8(dev, 0xf0, 0x00);
#if 0
display_cpuid_update_microcode();
#endif
#if 0
print_pci_devices();
#endif
#if 1
enable_smbus();
#endif
#if 0
// dump_spd_registers(&cpu[0]);
int i;
for(i = 0; i < 1; i++) {
dump_spd_registers();
}
#endif
disable_watchdogs();
// dump_ipmi_registers();
mainboard_set_e7520_leds();
// memreset_setup();
sdram_initialize(sizeof(mch)/sizeof(mch[0]), mch);
#if 0
dump_pci_devices();
#endif
#if 0
dump_pci_device(PCI_DEV(0, 0x00, 0));
dump_bar14(PCI_DEV(0, 0x00, 0));
#endif
#if 0 // temporarily disabled
/* Check the first 1M */
// ram_check(0x00000000, 0x000100000);
// ram_check(0x00000000, 0x000a0000);
// ram_check(0x00100000, 0x01000000);
ram_check(0x00100000, 0x00100100);
/* check the first 1M in the 3rd Gig */
// ram_check(0x30100000, 0x31000000);
#endif
#if 0
ram_check(0x00000000, 0x02000000);
#endif
#if 0
while(1) {
hlt();
}
#endif
}
|
