1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
|
## SPDX-License-Identifier: GPL-2.0-only
chip northbridge/intel/sandybridge
# All MRC-capable boards in family (P8Z77-M[ PRO]) lists supported
# DIMMs down to 1.25v
register "ddr3lv_support" = "1"
# FIXME: Nothing can run native at 800MHz on p8z77-m, others may have same problem
register "max_mem_clock_mhz" = "CONFIG(USE_NATIVE_RAMINIT) ? 666 : 800"
register "spd_addresses" = "{0x50, 0x51, 0x52, 0x53}"
register "usb_port_config" = "{
{1, 0, 0x0080}, {1, 0, 0x0080}, {1, 1, 0x0080}, {1, 1, 0x0080}, {1, 2, 0x0080},
{1, 2, 0x0080}, {1, 3, 0x0080}, {1, 3, 0x0080}, {1, 4, 0x0080}, {1, 4, 0x0080},
{1, 6, 0x0080}, {1, 5, 0x0080}, {1, 5, 0x0080}, {1, 6, 0x0080}
}"
# 4 bit switch mask. 0=not switchable, 1=switchable
# Means once it's loaded the OS, it can swap ports
# from/to EHCI/xHCI. Z77 has four USB3 ports, so 0xf
register "usb3.hs_port_switch_mask" = "0xf"
# (The other 3 usb3.* settings can be set from nvram options, and so are set
# from runtime code)
device domain 0 on
device ref host_bridge on end
device ref peg10 on end # PCIEX16_1
device ref igd on end
chip southbridge/intel/bd82x6x
register "sata_interface_speed_support" = "0x3"
register "sata_port_map" = "0x3f"
register "spi_lvscc" = "0x2005"
register "spi_uvscc" = "0x2005"
register "superspeed_capable_ports" = "0x0000000f"
register "xhci_overcurrent_mapping" = "0x00000c03"
register "xhci_switchable_ports" = "0x0000000f"
device ref xhci on end
device ref mei1 on end
device ref mei2 off end
device ref me_ide_r off end
device ref me_kt off end
device ref gbe off end
device ref ehci2 on end
device ref hda on end
device ref pcie_rp1 off end
device ref pcie_rp2 off end
device ref pcie_rp3 off end
device ref pcie_rp4 off end
device ref pcie_rp5 off end
device ref pcie_rp6 off end
device ref pcie_rp7 off end
device ref pcie_rp8 off end
device ref ehci1 on end
device ref pci_bridge off end
device ref lpc on end
device ref sata1 on end # SATA (AHCI)
device ref smbus on end
device ref sata2 off end # SATA (Legacy)
device ref thermal off end
end
end
end
|
