1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/hlt.h>
#include <stdlib.h>
#include <console/console.h>
#include "southbridge/intel/i82371eb/i82371eb.h"
#include "northbridge/intel/i440bx/raminit.h"
#include "drivers/pc80/udelay_io.c"
#include "lib/delay.c"
#include "cpu/x86/bist.h"
/* FIXME: The ASUS P3B-F has a Winbond W83977EF, actually. */
#include "superio/winbond/w83977tf/early_serial.c"
#include <lib.h>
/* FIXME: The ASUS P3B-F has a Winbond W83977EF, actually. */
#define SERIAL_DEV PNP_DEV(0x3f0, W83977TF_SP1)
int spd_read_byte(unsigned int device, unsigned int address)
{
return smbus_read_byte(device, address);
}
/*
* ASUS P3B-F specific SPD enable magic.
*
* Setting the byte at offset 0x37 in the PM I/O space to 0x6f will make the
* board DIMMs accessible at SMBus/SPD offsets 0x50-0x53. Per default the SPD
* offsets 0x50-0x53 are _not_ readable (all SPD reads will return 0xff) which
* will make RAM init fail.
*
* Tested values for PM I/O offset 0x37:
* 0x67: 11 00 111: Only SMBus/I2C offsets 0x48/0x49/0x2d accessible
* 0x6f: 11 01 111: Only SMBus/I2C offsets 0x50-0x53 (SPD) accessible
* 0x77: 11 10 111: Only SMBus/I2C offset 0x69 accessible
*
* PM I/O space offset 0x37 is GPOREG[31:24], i.e. it controls the GPIOs
* 24-30 of the PIIX4E (bit 31 is reserved). Thus, GPIOs 27 and 28
* control which SMBus/I2C offsets can be accessed.
*/
static void enable_spd(void)
{
outb(0x6f, PM_IO_BASE + 0x37);
}
/*
* Disable SPD access after RAM init to allow access to SMBus/I2C offsets
* 0x48/0x49/0x2d, which is required e.g. by lm-sensors.
*/
static void disable_spd(void)
{
outb(0x67, PM_IO_BASE + 0x37);
}
void main(unsigned long bist)
{
/* FIXME: The ASUS P3B-F has a Winbond W83977EF, actually. */
w83977tf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
console_init();
report_bist_failure(bist);
enable_smbus();
enable_pm();
enable_spd();
dump_spd_registers();
sdram_set_registers();
sdram_set_spd_registers();
sdram_enable();
disable_spd();
}
|