1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <arch/io.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/mtrr.h>
#include <device/pci_def.h>
#include "southbridge/amd/sb700/sb700.h"
#include "southbridge/amd/sb700/smbus.h"
#include "chip.h"
#define ADT7461_ADDRESS 0x4C
#define ARA_ADDRESS 0x0C /* Alert Response Address */
#define ADT7461_read_byte(address) \
do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address)
#define ARA_read_byte(address) \
do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address)
#define ADT7461_write_byte(address, val) \
do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val)
uint64_t uma_memory_base, uma_memory_size;
void set_pcie_dereset(void);
void set_pcie_reset(void);
u8 is_dev3_present(void);
void set_pcie_dereset()
{
u8 byte;
u16 word;
device_t sm_dev;
/* set 0 to bit1 :disable GPM9 as SLP_S2 output */
/* set 0 to bit2 :disable GPM8 as AZ_RST output */
byte = pm_ioread(0x8d);
byte &= ~((1 << 1) | (1 << 2));
pm_iowrite(0x8d, byte);
/* set the GPM8 and GPM9 output enable and the value to 1 */
byte = pm_ioread(0x94);
byte &= ~((1 << 2) | (1 << 3));
byte |= ((1 << 0) | (1 << 1));
pm_iowrite(0x94, byte);
/* set the GPIO65 output enable and the value is 1 */
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
word = pci_read_config16(sm_dev, 0x7e);
word |= (1 << 0);
word &= ~(1 << 4);
pci_write_config16(sm_dev, 0x7e, word);
}
void set_pcie_reset()
{
u8 byte;
u16 word;
device_t sm_dev;
/* set 0 to bit1 :disable GPM9 as SLP_S2 output */
/* set 0 to bit2 :disable GPM8 as AZ_RST output */
byte = pm_ioread(0x8d);
byte &= ~((1 << 1) | (1 << 2));
pm_iowrite(0x8d, byte);
/* set the GPM8 and GPM9 output enable and the value to 0 */
byte = pm_ioread(0x94);
byte &= ~((1 << 2) | (1 << 3));
byte &= ~((1 << 0) | (1 << 1));
pm_iowrite(0x94, byte);
/* set the GPIO65 output enable and the value is 0 */
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
word = pci_read_config16(sm_dev, 0x7e);
word &= ~(1 << 0);
word &= ~(1 << 4);
pci_write_config16(sm_dev, 0x7e, word);
}
/*
* justify the dev3 is exist or not
* NOTE: This just copied from AMD Tilapia code.
* It is completly unknown it it will work at all for ASUS M4A785-M.
*/
u8 is_dev3_present(void)
{
u16 word;
device_t sm_dev;
/* access the smbus extended register */
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
/* put the GPIO68 output to tristate */
word = pci_read_config16(sm_dev, 0x7e);
word |= 1 << 6;
pci_write_config16(sm_dev, 0x7e,word);
/* read the GPIO68 input status */
word = pci_read_config16(sm_dev, 0x7e);
if(word & (1 << 10)){
/*not exist*/
return 0;
}else{
/*exist*/
return 1;
}
}
/*
* set thermal config
*/
static void set_thermal_config(void)
{
u8 byte;
u16 word;
device_t sm_dev;
/* set ADT 7461 */
ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */
ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */
ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */
ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */
ADT7461_write_byte(0x19, 0x55); /* External THERM limit */
ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */
byte = ADT7461_read_byte(0x02); /* read status register to clear it */
ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */
printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte);
/* sb700 settings for thermal config */
/* set SB700 GPIO 64 to GPIO with pull-up */
byte = pm2_ioread(0x42);
byte &= 0x3f;
pm2_iowrite(0x42, byte);
/* set GPIO 64 to input */
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
word = pci_read_config16(sm_dev, 0x56);
word |= 1 << 7;
pci_write_config16(sm_dev, 0x56, word);
/* set GPIO 64 internal pull-up */
byte = pm2_ioread(0xf0);
byte &= 0xee;
pm2_iowrite(0xf0, byte);
/* set Talert to be active low */
byte = pm_ioread(0x67);
byte &= ~(1 << 5);
pm_iowrite(0x67, byte);
/* set Talert to generate ACPI event */
byte = pm_ioread(0x3c);
byte &= 0xf3;
pm_iowrite(0x3c, byte);
/* THERMTRIP pin */
/* byte = pm_ioread(0x68);
* byte |= 1 << 3;
* pm_iowrite(0x68, byte);
*
* byte = pm_ioread(0x55);
* byte |= 1 << 0;
* pm_iowrite(0x55, byte);
*
* byte = pm_ioread(0x67);
* byte &= ~( 1 << 6);
* pm_iowrite(0x67, byte);
*/
}
/*************************************************
* enable the dedicated function in this board.
* This function called early than rs780_enable.
*************************************************/
static void m4a785m_enable(device_t dev)
{
printk(BIOS_INFO, "Mainboard enable. dev=0x%p\n", dev);
#if (CONFIG_GFXUMA == 1)
msr_t msr, msr2;
/* TOP_MEM: the top of DRAM below 4G */
msr = rdmsr(TOP_MEM);
printk(BIOS_INFO,
"%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
__func__, msr.lo, msr.hi);
/* TOP_MEM2: the top of DRAM above 4G */
msr2 = rdmsr(TOP_MEM2);
printk(BIOS_INFO,
"%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
__func__, msr2.lo, msr2.hi);
switch (msr.lo) {
case 0x10000000: /* 256M system memory */
uma_memory_size = 0x4000000; /* 64M recommended UMA */
break;
case 0x20000000: /* 512M system memory */
uma_memory_size = 0x8000000; /* 128M recommended UMA */
break;
default: /* 1GB and above system memory */
uma_memory_size = 0x10000000; /* 256M recommended UMA */
break;
}
uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */
printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n",
__func__, uma_memory_size, uma_memory_base);
/* TODO: TOP_MEM2 */
#else
uma_memory_size = 0x8000000; /* 128M recommended UMA */
uma_memory_base = 0x38000000; /* 1GB system memory supposed */
#endif
set_pcie_dereset();
/* get_ide_dma66(); */
set_thermal_config();
}
struct chip_operations mainboard_ops = {
CHIP_NAME("ASUS M4A785-M Mainboard")
.enable_dev = m4a785m_enable,
};
|
