1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <arch/io.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/mtrr.h>
#include <device/pci_def.h>
#include "southbridge/amd/sb700/sb700.h"
#include "southbridge/amd/sb700/smbus.h"
#include "chip.h"
uint64_t uma_memory_base, uma_memory_size;
void set_pcie_dereset(void);
void set_pcie_reset(void);
u8 is_dev3_present(void);
void set_pcie_dereset()
{
u8 byte;
u16 word;
device_t sm_dev;
/* set 0 to bit1 :disable GPM9 as SLP_S2 output */
/* set 0 to bit2 :disable GPM8 as AZ_RST output */
byte = pm_ioread(0x8d);
byte &= ~((1 << 1) | (1 << 2));
pm_iowrite(0x8d, byte);
/* set the GPM8 and GPM9 output enable and the value to 1 */
byte = pm_ioread(0x94);
byte &= ~((1 << 2) | (1 << 3));
byte |= ((1 << 0) | (1 << 1));
pm_iowrite(0x94, byte);
/* set the GPIO65 output enable and the value is 1 */
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
word = pci_read_config16(sm_dev, 0x7e);
word |= (1 << 0);
word &= ~(1 << 4);
pci_write_config16(sm_dev, 0x7e, word);
}
void set_pcie_reset()
{
u8 byte;
u16 word;
device_t sm_dev;
/* set 0 to bit1 :disable GPM9 as SLP_S2 output */
/* set 0 to bit2 :disable GPM8 as AZ_RST output */
byte = pm_ioread(0x8d);
byte &= ~((1 << 1) | (1 << 2));
pm_iowrite(0x8d, byte);
/* set the GPM8 and GPM9 output enable and the value to 0 */
byte = pm_ioread(0x94);
byte &= ~((1 << 2) | (1 << 3));
byte &= ~((1 << 0) | (1 << 1));
pm_iowrite(0x94, byte);
/* set the GPIO65 output enable and the value is 0 */
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
word = pci_read_config16(sm_dev, 0x7e);
word &= ~(1 << 0);
word &= ~(1 << 4);
pci_write_config16(sm_dev, 0x7e, word);
}
/*
* justify the dev3 is exist or not
* NOTE: This just copied from AMD Tilapia code.
* It is completly unknown if it will work at all for this board.
*/
u8 is_dev3_present(void)
{
u16 word;
device_t sm_dev;
/* access the smbus extended register */
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
/* put the GPIO68 output to tristate */
word = pci_read_config16(sm_dev, 0x7e);
word |= 1 << 6;
pci_write_config16(sm_dev, 0x7e,word);
/* read the GPIO68 input status */
word = pci_read_config16(sm_dev, 0x7e);
if(word & (1 << 10)){
/*not exist*/
return 0;
}else{
/*exist*/
return 1;
}
}
/*************************************************
* enable the dedicated function in this board.
* This function called early than rs780_enable.
*************************************************/
static void m4a78em_enable(device_t dev)
{
printk(BIOS_INFO, "Mainboard enable. dev=0x%p\n", dev);
#if CONFIG_GFXUMA
msr_t msr, msr2;
/* TOP_MEM: the top of DRAM below 4G */
msr = rdmsr(TOP_MEM);
printk(BIOS_INFO,
"%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
__func__, msr.lo, msr.hi);
/* TOP_MEM2: the top of DRAM above 4G */
msr2 = rdmsr(TOP_MEM2);
printk(BIOS_INFO,
"%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
__func__, msr2.lo, msr2.hi);
switch (msr.lo) {
case 0x10000000: /* 256M system memory */
uma_memory_size = 0x4000000; /* 64M recommended UMA */
break;
case 0x20000000: /* 512M system memory */
uma_memory_size = 0x8000000; /* 128M recommended UMA */
break;
default: /* 1GB and above system memory */
uma_memory_size = 0x10000000; /* 256M recommended UMA */
break;
}
uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */
printk(BIOS_INFO, "%s: uma size 0x%08llx, memory start 0x%08llx\n",
__func__, uma_memory_size, uma_memory_base);
/* TODO: TOP_MEM2 */
#else
uma_memory_size = 0x8000000; /* 128M recommended UMA */
uma_memory_base = 0x38000000; /* 1GB system memory supposed */
#endif
set_pcie_dereset();
/* get_ide_dma66(); */
/* set_thermal_config(); */
}
struct chip_operations mainboard_ops = {
CHIP_NAME("ASUS M4A78-EM Mainboard")
.enable_dev = m4a78em_enable,
};
|
