1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <amdblocks/acpimmio.h>
#include <arch/io.h>
#include <bootblock_common.h>
#include <device/pnp_ops.h>
#include <superio/ite/common/ite.h>
#include <superio/ite/it8623e/it8623e.h>
#if CONFIG_UART_FOR_CONSOLE == 0
#define SERIAL_DEV PNP_DEV(0x2e, IT8623E_SP1)
#elif CONFIG_UART_FOR_CONSOLE == 1
#define SERIAL_DEV PNP_DEV(0x2e, IT8623E_SP2)
#else
#error "Invalid value for CONFIG_UART_FOR_CONSOLE"
#endif
#define GPIO_DEV PNP_DEV(0x2e, IT8623E_GPIO)
#define CLKIN_DEV PNP_DEV(0x2e, IT8623E_GPIO)
#define ENVC_DEV PNP_DEV(0x2e, IT8623E_EC)
/* Sets up EC configuration as per vendor defaults */
static void ite_evc_conf(pnp_devfn_t dev)
{
pnp_set_enable(dev, 0);
ite_reg_write(dev, 0x70, 0x00);
ite_reg_write(dev, 0xf0, 0x00);
ite_reg_write(dev, 0xf1, 0x00);
ite_reg_write(dev, 0xf2, 0x06);
ite_reg_write(dev, 0xf3, 0x00);
ite_reg_write(dev, 0xf4, 0x00);
ite_reg_write(dev, 0xf5, 0x36);
ite_reg_write(dev, 0xf6, 0x03);
ite_reg_write(dev, 0xf9, 0x48);
ite_reg_write(dev, 0xfa, 0x00);
ite_reg_write(dev, 0xfb, 0x10);
pnp_set_enable(dev, 1);
}
/*
* Sets up GPIO configuration as per vendor defaults
* SIO defaults are unknown therefore all GPIO pins are configured
*/
static void ite_gpio_conf(pnp_devfn_t dev)
{
ite_reg_write(dev, 0x23, 0x08);
ite_reg_write(dev, 0x25, 0x10);
ite_reg_write(dev, 0x26, 0x00);
ite_reg_write(dev, 0x27, 0x80);
ite_reg_write(dev, 0x28, 0x45);
ite_reg_write(dev, 0x29, 0x00);
ite_reg_write(dev, 0x2a, 0x00);
ite_reg_write(dev, 0x2b, 0x48);
ite_reg_write(dev, 0x2c, 0x10);
ite_reg_write(dev, 0x2d, 0x80);
ite_reg_write(dev, 0x71, 0x00);
ite_reg_write(dev, 0x72, 0x00);
ite_reg_write(dev, 0x73, 0x38);
ite_reg_write(dev, 0x74, 0x00);
ite_reg_write(dev, 0xb0, 0x00);
ite_reg_write(dev, 0xb1, 0x00);
ite_reg_write(dev, 0xb2, 0x00);
ite_reg_write(dev, 0xb3, 0x00);
ite_reg_write(dev, 0xb4, 0x00);
ite_reg_write(dev, 0xb8, 0x00);
ite_reg_write(dev, 0xb9, 0x00);
ite_reg_write(dev, 0xba, 0x00);
ite_reg_write(dev, 0xbb, 0x00);
ite_reg_write(dev, 0xbc, 0x00);
ite_reg_write(dev, 0xbd, 0x00);
ite_reg_write(dev, 0xc0, 0x01);
ite_reg_write(dev, 0xc1, 0x00);
ite_reg_write(dev, 0xc2, 0x00);
ite_reg_write(dev, 0xc3, 0x00);
ite_reg_write(dev, 0xc4, 0x00);
ite_reg_write(dev, 0xc8, 0x01);
ite_reg_write(dev, 0xc9, 0x00);
ite_reg_write(dev, 0xca, 0x00);
ite_reg_write(dev, 0xcb, 0x00);
ite_reg_write(dev, 0xcc, 0x00);
ite_reg_write(dev, 0xcd, 0x20);
ite_reg_write(dev, 0xce, 0x00);
ite_reg_write(dev, 0xcf, 0x00);
ite_reg_write(dev, 0xe0, 0x00);
ite_reg_write(dev, 0xe1, 0x00);
ite_reg_write(dev, 0xe2, 0x00);
ite_reg_write(dev, 0xe3, 0x00);
ite_reg_write(dev, 0xe4, 0x00);
ite_reg_write(dev, 0xe9, 0x21);
ite_reg_write(dev, 0xf0, 0x00);
ite_reg_write(dev, 0xf1, 0x00);
ite_reg_write(dev, 0xf2, 0x00);
ite_reg_write(dev, 0xf3, 0x00);
ite_reg_write(dev, 0xf4, 0x00);
ite_reg_write(dev, 0xf5, 0x00);
ite_reg_write(dev, 0xf6, 0x00);
ite_reg_write(dev, 0xf7, 0x00);
ite_reg_write(dev, 0xf8, 0x00);
ite_reg_write(dev, 0xf9, 0x00);
ite_reg_write(dev, 0xfa, 0x00);
ite_reg_write(dev, 0xfb, 0x00);
}
void bootblock_mainboard_early_init(void)
{
u32 i;
/* Disable PCI-PCI bridge and release GPIO32/33 for other uses. */
pm_write8(0xea, 0x1);
/* Configure ClkDrvStr1 settings */
misc_write32(0x24, 0x030800aa);
/* Configure MiscClkCntl1 settings */
misc_write32(0x40, 0x000c4050);
/* Configure SIO as made under vendor BIOS */
ite_gpio_conf(GPIO_DEV);
ite_evc_conf(ENVC_DEV);
/* Enable serial output on it8623e */
ite_conf_clkin(CLKIN_DEV, ITE_UART_CLK_PREDIVIDE_48);
ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
ite_kill_watchdog(GPIO_DEV);
/*
* On Larne, after LpcClkDrvSth is set, it needs some time to be stable,
* because of the buffer ICS551M
*/
for (i = 0; i < 200000; i++)
inb(0xcd6);
}
|
