1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "AGESA.h"
#include "amdlib.h"
#include "BiosCallOuts.h"
#include "heapManager.h"
#include "SB800.h"
#include <stdlib.h>
/* Should AGESA_GNB_PCIE_SLOT_RESET use agesa_NoopSuccess?
*
* Board is known to have some issues with integrated NIC and
* might need implementation to drive some GPIOs.
*/
static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr);
const BIOS_CALLOUT_STRUCT BiosCallouts[] =
{
{AGESA_ALLOCATE_BUFFER, agesa_AllocateBuffer },
{AGESA_DEALLOCATE_BUFFER, agesa_DeallocateBuffer },
{AGESA_LOCATE_BUFFER, agesa_LocateBuffer },
{AGESA_DO_RESET, agesa_Reset },
{AGESA_READ_SPD, agesa_ReadSpd },
{AGESA_READ_SPD_RECOVERY, agesa_NoopUnsupported },
{AGESA_RUNFUNC_ONAP, agesa_RunFuncOnAp },
{AGESA_HOOKBEFORE_DQS_TRAINING, agesa_NoopSuccess },
{AGESA_HOOKBEFORE_DRAM_INIT, board_BeforeDramInit },
{AGESA_HOOKBEFORE_EXIT_SELF_REF, agesa_NoopSuccess },
{AGESA_GNB_PCIE_SLOT_RESET, agesa_NoopUnsupported },
};
const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);
/* Call the host environment interface to provide a user hook opportunity. */
static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINT32 Data, VOID *ConfigPtr)
{
AGESA_STATUS Status;
UINTN FcnData;
MEM_DATA_STRUCT *MemData;
UINT32 AcpiMmioAddr;
UINT32 GpioMmioAddr;
UINT8 Data8;
UINT16 Data16;
UINT8 TempData8;
FcnData = Data;
MemData = ConfigPtr;
Status = AGESA_SUCCESS;
/* Get SB800 MMIO Base (AcpiMmioAddr) */
WriteIo8 (0xCD6, 0x27);
Data8 = ReadIo8(0xCD7);
Data16 = Data8<<8;
WriteIo8 (0xCD6, 0x26);
Data8 = ReadIo8(0xCD7);
Data16 |= Data8;
AcpiMmioAddr = (UINT32)Data16 << 16;
GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG178);
Data8 &= ~BIT5;
TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
TempData8 &= 0x03;
TempData8 |= Data8;
Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
Data8 |= BIT2+BIT3;
Data8 &= ~BIT4;
TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
TempData8 &= 0x23;
TempData8 |= Data8;
Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, TempData8);
Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG179);
Data8 &= ~BIT5;
TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
TempData8 &= 0x03;
TempData8 |= Data8;
Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
Data8 |= BIT2+BIT3;
Data8 &= ~BIT4;
TempData8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
TempData8 &= 0x23;
TempData8 |= Data8;
Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, TempData8);
switch(MemData->ParameterListPtr->DDR3Voltage){
case VOLT1_35:
Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
Data8 &= ~(UINT8)BIT6;
Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
Data8 |= (UINT8)BIT6;
Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
break;
case VOLT1_25:
Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
Data8 &= ~(UINT8)BIT6;
Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
Data8 &= ~(UINT8)BIT6;
Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
break;
case VOLT1_5:
default:
Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG178);
Data8 |= (UINT8)BIT6;
Write64Mem8(GpioMmioAddr+SB_GPIO_REG178, Data8);
Data8 = Read64Mem8 (GpioMmioAddr+SB_GPIO_REG179);
Data8 &= ~(UINT8)BIT6;
Write64Mem8(GpioMmioAddr+SB_GPIO_REG179, Data8);
}
// disable memory clear for boot time reduction
MemData->ParameterListPtr->EnableMemClr = FALSE;
return Status;
}
|
