1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
|
#define ASSEMBLY 1
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <arch/hlt.h>
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
//#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/x86/bist.h"
#include "cpu/x86/msr.h"
#include <cpu/amd/lxdef.h>
//#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
#include "southbridge/amd/cs5536/cs5536_early_smbus.c"
#include "southbridge/amd/cs5536/cs5536_early_setup.c"
static inline int spd_read_byte(unsigned device, unsigned address)
{
return smbus_read_byte(device, address);
}
#include "northbridge/amd/lx/raminit.h"
static inline unsigned int fls(unsigned int x)
{
int r;
__asm__("bsfl %1,%0\n\t"
"jnz 1f\n\t"
"movl $32,%0\n"
"1:" : "=r" (r) : "g" (x));
return r;
}
static void sdram_set_spd_registers(const struct mem_controller *ctrl)
{
/* Total size of DIMM = 2^row address (byte 3) * 2^col address (byte 4) *
* component Banks (byte 17) * module banks, side (byte 5) *
* width in bits (byte 6,7)
* = Density per side (byte 31) * number of sides (byte 5) */
/* 1. Initialize GLMC registers base on SPD values, do one DIMM for now */
msr_t msr;
unsigned char module_banks, val;
msr.hi = 0x10075012;
msr.lo = 0x00000040;
wrmsr(MC_CF07_DATA, msr); //GX3
/* timing and mode ... */
//msr = rdmsr(0x20000019);
/* per standard bios settings */
/*
msr.hi = 0x18000108;
msr.lo =
(6<<28) | // cas_lat
(10<<24)| // ref2act
(7<<20)| // act2pre
(3<<16)| // pre2act
(3<<12)| // act2cmd
(2<<8)| // act2act
(2<<6)| // dplwr
(2<<4)| // dplrd
(3); // dal
* the msr value reported by quanta is very, very different.
* we will go with that value for now.
*
//msr.lo = 0x286332a3;
*/
//wrmsr(0x20000019, msr); //GX3
}
#include "northbridge/amd/lx/raminit.c"
#include "sdram/generic_sdram.c"
/* CPU and GLIU mult/div */
#define PLLMSRhi 0x0000039C
/* Hold Count - how long we will sit in reset */
#define PLLMSRlo 0x00DE0000
#include "northbridge/amd/lx/pll_reset.c"
#include "cpu/amd/model_lx/cpureginit.c"
#include "cpu/amd/model_lx/syspreinit.c"
static void msr_init(void)
{
__builtin_wrmsr(0x10000020, 0xfff80, 0x20000000);
__builtin_wrmsr(0x10000021, 0x80fffe0, 0x20000000);
__builtin_wrmsr(0x40000020, 0xfff80, 0x20000000);
__builtin_wrmsr(0x40000021, 0x80fffe0, 0x20000000);
}
static void main(unsigned long bist)
{
static const struct mem_controller memctrl [] = {
{.channel0 = {(0xa<<3)|0, (0xa<<3)|1}}
};
SystemPreInit(); //GX3 OK
msr_init(); //GX3 OK
cs5536_early_setup(); //GX3 OK
/* NOTE: must do this AFTER the early_setup!
* it is counting on some early MSR setup
* for cs5536
*/
cs5536_setup_onchipuart(); //GX3 OK
uart_init(); //GX3 OK
console_init(); //GX3 OK
pll_reset(); //GX3 OK
cpuRegInit(); //GX3 OK
print_err("done cpuRegInit\n");
sdram_initialize(1, memctrl); //GX3 OK almost
/* Check all of memory */
//ram_check(0x00000000, 640*1024);
}
|
