1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2011 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <arch/io.h>
#include <boot/tables.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/mtrr.h>
#include <device/pci_def.h>
#include "SBPLATFORM.h" /* Platfrom Specific Definitions */
void set_pcie_reset(void);
void set_pcie_dereset(void);
/**
* TODO
* SB CIMx callback
*/
void set_pcie_reset(void)
{
}
/**
* TODO
* mainboard specific SB CIMx callback
*/
void set_pcie_dereset(void)
{
}
/**
* Southstation using SB GPIO 17/18 to control the Red/Green LED
* These two LEDs can be used to show the OS booting status.
*/
static void southstation_led_init(void)
{
#define GPIO_FUNCTION 2 //GPIO function
#define SB_GPIO_REG17 17 //Red Light
#define SB_GPIO_REG18 18 //Green Light
/* multi-function pins switch to GPIO0-35 */
RWMEM(ACPI_MMIO_BASE + PMIO_BASE + SB_PMIOA_REGEA, AccWidthUint8, ~BIT0, 1);
/* select IOMux to function2, corresponds to GPIO */
RWMEM(ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG17, AccWidthUint8, ~(BIT0 | BIT1), GPIO_FUNCTION);
RWMEM(ACPI_MMIO_BASE + IOMUX_BASE + SB_GPIO_REG18, AccWidthUint8, ~(BIT0 | BIT1), GPIO_FUNCTION);
/* Lighting test */
RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG17, AccWidthUint8, ~(0xFF), 0x08); //output high
RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG18, AccWidthUint8, ~(0xFF), 0x08);
mdelay(100);
RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG17, AccWidthUint8, ~(0xFF), 0x48); //output low
RWMEM(ACPI_MMIO_BASE + GPIO_BASE + SB_GPIO_REG18, AccWidthUint8, ~(0xFF), 0x48);
}
/*************************************************
* enable the dedicated function in southstation board.
*************************************************/
static void southstation_enable(device_t dev)
{
printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");
setup_uma_memory();
southstation_led_init();
}
int add_mainboard_resources(struct lb_memory *mem)
{
return 0;
}
struct chip_operations mainboard_ops = {
CHIP_NAME(CONFIG_MAINBOARD_VENDOR " " CONFIG_MAINBOARD_PART_NUMBER " Mainboard")
.enable_dev = southstation_enable,
};
|
