1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
|
#define ASSEMBLY 1
#include <stdint.h>
#include <device/pci_def.h>
#include <cpu/p6/apic.h>
#include <arch/io.h>
#include <device/pnp.h>
#include <arch/romcc_io.h>
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
#include "northbridge/amd/amdk8/early_ht.c"
#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/k8/apic_timer.c"
#include "lib/delay.c"
#include "cpu/p6/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "debug.c"
#define SIO_BASE 0x2e
static void memreset_setup(void)
{
/* Set the memreset low */
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0), SMBUS_IO_BASE + 0xc0 + 28);
/* Ensure the BIOS has control of the memory lines */
}
static void memreset(int controllers, const struct mem_controller *ctrl)
{
udelay(800);
/* Set memreset_high */
outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0), SMBUS_IO_BASE + 0xc0 + 28);
udelay(90);
}
static unsigned int generate_row(uint8_t node, uint8_t row, uint8_t maxnodes)
{
/* since the AMD Solo is a UP only machine, we can
* always return the default row entry value
*/
return 0x00010101; /* default row entry */
}
static inline int spd_read_byte(unsigned device, unsigned address)
{
return smbus_read_byte(device, address);
}
/* no specific code here. this should go away completely */
static void coherent_ht_mainboard(unsigned cpus)
{
}
#include "northbridge/amd/amdk8/cpu_ldtstop.c"
#include "southbridge/amd/amd8111/amd8111_ldtstop.c"
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "sdram/generic_sdram.c"
static void enable_lapic(void)
{
msr_t msr;
msr = rdmsr(0x1b);
msr.hi &= 0xffffff00;
msr.lo &= 0x000007ff;
msr.lo |= APIC_DEFAULT_BASE | (1 << 11);
wrmsr(0x1b, msr);
}
static void stop_this_cpu(void)
{
unsigned apicid;
apicid = apic_read(APIC_ID) >> 24;
/* Send an APIC INIT to myself */
apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_INT_ASSERT | APIC_DM_INIT);
/* Wait for the ipi send to finish */
apic_wait_icr_idle();
/* Deassert the APIC INIT */
apic_write(APIC_ICR2, SET_APIC_DEST_FIELD(apicid));
apic_write(APIC_ICR, APIC_INT_LEVELTRIG | APIC_DM_INIT);
/* Wait for the ipi send to finish */
apic_wait_icr_idle();
/* If I haven't halted spin forever */
for(;;) {
hlt();
}
}
#define PC87360_FDC 0x00
#define PC87360_PP 0x01
#define PC87360_SP2 0x02
#define PC87360_SP1 0x03
#define PC87360_SWC 0x04
#define PC87360_KBCM 0x05
#define PC87360_KBCK 0x06
#define PC87360_GPIO 0x07
#define PC87360_ACB 0x08
#define PC87360_FSCM 0x09
#define PC87360_WDT 0x0A
/* FIXME: Do we really need this on Solo boards? */
static void pc87360_enable_serial(void)
{
pnp_set_logical_device(SIO_BASE, PC87360_SP1);
pnp_set_enable(SIO_BASE, 1);
pnp_set_iobase0(SIO_BASE, 0x3f8);
}
static void main(void)
{
/*
* GPIO28 of 8111 will control H0_MEMRESET_L
*/
static const struct mem_controller cpu[] = {
{
.node_id = 0,
.f0 = PCI_DEV(0, 0x18, 0),
.f1 = PCI_DEV(0, 0x18, 1),
.f2 = PCI_DEV(0, 0x18, 2),
.f3 = PCI_DEV(0, 0x18, 3),
.channel0 = { (0xa<<3), (0xa<<3)|1, 0, 0 },
.channel1 = { 0, 0, 0, 0 },
}
};
if (cpu_init_detected()) {
asm("jmp __cpu_reset");
}
enable_lapic();
init_timer();
/* Solo boards only have 1 CPU, this check is not needed!? */
if (!boot_cpu()) {
notify_bsp_ap_is_stopped();
stop_this_cpu();
}
pc87360_enable_serial();
uart_init();
console_init();
setup_default_resource_map();
setup_coherent_ht_domain();
enumerate_ht_chain(0);
distinguish_cpu_resets(0);
enable_smbus();
memreset_setup();
sdram_initialize(1, cpu);
msr_t msr;
msr = rdmsr(TOP_MEM);
print_debug("TOP_MEM: ");
print_debug_hex32(msr.hi);
print_debug_hex32(msr.lo);
print_debug("\r\n");
ram_check(0x00000000, msr.lo);
}
|
