1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <amdblocks/acpimmio.h>
#include <console/console.h>
#include <device/device.h>
static void init_gpios(void)
{
/**
* GPIO32 Pcie Device DeAssert for APU
* GPIO25 Pcie LAN, APU GPP2
* GPIO02 MINIPCIE SLOT1, APU GPP3
* GPIO50 Pcie Device DeAssert for Hudson Southbridge
* GPIO05 Express Card, SB GPP0
* GPIO26 NEC USB3.0GPPUSB, SB GPP1
* GPIO00 MINIPCIE SLOT2, SB GPP2
* GPIO05 Pcie X1 Slot, SB GPP3
*/
/* Multi-function pins switch to GPIO0-35, these pins are shared with
* PCI pins, make sure Hudson PCI device is disabled.
*/
pm_write8(0xea, (pm_read8(0xea) & 0xfe) | 1);
/* select IOMux to function1/2, corresponds to GPIO */
iomux_write8(0x32, (iomux_read8(0x32) & 0xfc) | 1);
iomux_write8(0x50, (iomux_read8(0x50) & 0xfc) | 2);
/* output low */
gpio_100_write8(0x20, 0x48);
gpio_100_write8(0x32, 0x48);
}
/**********************************************
* Enable the dedicated functions of the board.
**********************************************/
static void mainboard_enable(struct device *dev)
{
/* Inagua mainboard specific setting */
init_gpios();
/*
* Initialize ASF registers to an arbitrary address because someone
* long ago set things up this way inside the SPD read code. The
* SPD read code has been made generic and moved out of the board
* directory, so the ASF init is being done here.
*/
pm_write8(0x29, 0x80);
pm_write8(0x28, 0x61);
}
struct chip_operations mainboard_ops = {
.enable_dev = mainboard_enable,
};
|
