1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2012 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include "Filecode.h"
#include "Hudson-2.h"
#include "AmdSbLib.h"
#include "gpio.h"
#define FILECODE UNASSIGNED_FILE_FILECODE
#ifndef SB_GPIO_REG01
#define SB_GPIO_REG01 1
#endif
#ifndef SB_GPIO_REG07
#define SB_GPIO_REG07 7
#endif
#ifndef SB_GPIO_REG25
#define SB_GPIO_REG25 25
#endif
#ifndef SB_GPIO_REG26
#define SB_GPIO_REG26 26
#endif
#ifndef SB_GPIO_REG27
#define SB_GPIO_REG27 27
#endif
void gpioEarlyInit (void);
void
gpioEarlyInit(
void
)
{
u8 Flags;
u8 Data8 = 0;
u8 StripInfo = 0;
u8 BoardType = 1;
u8 RegIndex8 = 0;
u8 boardRevC = 0x2;
u16 Data16 = 0;
u32 Index = 0;
u32 AcpiMmioAddr = 0;
u32 GpioMmioAddr = 0;
u32 IoMuxMmioAddr = 0;
u32 MiscMmioAddr = 0;
u32 SmiMmioAddr = 0;
u32 andMask32 = 0;
// Enable HUDSON MMIO Base (AcpiMmioAddr)
ReadPMIO (SB_PMIOA_REG24, AccWidthUint8, &Data8);
Data8 |= BIT0;
WritePMIO (SB_PMIOA_REG24, AccWidthUint8, &Data8);
// Get HUDSON MMIO Base (AcpiMmioAddr)
ReadPMIO (SB_PMIOA_REG24 + 3, AccWidthUint8, &Data8);
Data16 = Data8 << 8;
ReadPMIO (SB_PMIOA_REG24 + 2, AccWidthUint8, &Data8);
Data16 |= Data8;
AcpiMmioAddr = (u32)Data16 << 16;
GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
IoMuxMmioAddr = AcpiMmioAddr + IOMUX_BASE;
MiscMmioAddr = AcpiMmioAddr + MISC_BASE;
Data8 = Mmio8_G (MiscMmioAddr, SB_MISC_REG80);
if ((Data8 & BIT4) == 0) {
BoardType = 0; // external clock board
}
Data8 = Mmio8_G (GpioMmioAddr, GPIO_30);
StripInfo = (Data8 & BIT7) >> 7;
Data8 = Mmio8_G (GpioMmioAddr, GPIO_31);
StripInfo |= (Data8 & BIT7) >> 6;
if (StripInfo < boardRevC) { // for old board. Rev B
Mmio8_And_Or (IoMuxMmioAddr, GPIO_111, 0x00, 3); // function 3
Mmio8_And_Or (IoMuxMmioAddr, GPIO_113, 0x00, 0); // function 0
}
for (Index = 0; Index < MAX_GPIO_NO; Index++) {
if (!(((Index >= GPIO_RSVD_ZONE0_S) && (Index <= GPIO_RSVD_ZONE0_E)) || ((Index >= GPIO_RSVD_ZONE1_S) && (Index <= GPIO_RSVD_ZONE1_E)))) {
if ((StripInfo >= boardRevC) || ((Index != GPIO_111) && (Index != GPIO_113))) {
// Configure multi-function
Mmio8_And_Or (IoMuxMmioAddr, Index, 0x00, (gpio_table[Index].select & ~NonGpio));
}
// Configure GPIO
if(!((gpio_table[Index].NonGpioGevent & NonGpio))) {
Mmio8_And_Or (GpioMmioAddr, Index, 0xDF, gpio_table[Index].type);
Mmio8_And_Or (GpioMmioAddr, Index, 0xA3, gpio_table[Index].value);
}
if (Index == GPIO_65) {
if ( BoardType == 0 ) {
Mmio8_And_Or (IoMuxMmioAddr, GPIO_65, 0x00, 3); // function 3
}
}
}
// Configure GEVENT
if ((Index >= GEVENT_00) && (Index <= GEVENT_23) && ((gevent_table[Index - GEVENT_00].EventEnable))) {
SmiMmioAddr = AcpiMmioAddr + SMI_BASE;
andMask32 = ~(1 << (Index - GEVENT_00));
//EventEnable: 0-Disable, 1-Enable
Mmio32_And_Or (SmiMmioAddr, SMIREG_EVENT_ENABLE, andMask32, (gevent_table[Index - GEVENT_00].EventEnable << (Index - GEVENT_00)));
//SciTrig: 0-Falling Edge, 1-Rising Edge
Mmio32_And_Or (SmiMmioAddr, SMIREG_SCITRIG, andMask32, (gevent_table[Index - GEVENT_00].SciTrig << (Index - GEVENT_00)));
//SciLevl: 0-Edge trigger, 1-Level Trigger
Mmio32_And_Or (SmiMmioAddr, SMIREG_SCILEVEL, andMask32, (gevent_table[Index - GEVENT_00].SciLevl << (Index - GEVENT_00)));
//SmiSciEn: 0-Not send SMI, 1-Send SMI
Mmio32_And_Or (SmiMmioAddr, SMIREG_SMISCIEN, andMask32, (gevent_table[Index - GEVENT_00].SmiSciEn << (Index - GEVENT_00)));
//SciS0En: 0-Disable, 1-Enable
Mmio32_And_Or (SmiMmioAddr, SMIREG_SCIS0EN, andMask32, (gevent_table[Index - GEVENT_00].SciS0En << (Index - GEVENT_00)));
//SciMap: 00000b ~ 11111b
RegIndex8=(u8)((Index - GEVENT_00) >> 2);
Data8=(u8)(((Index - GEVENT_00) & 0x3) * 8);
Mmio32_And_Or (SmiMmioAddr, SMIREG_SCIMAP0+RegIndex8, ~(GEVENT_SCIMASK << Data8), (gevent_table[Index - GEVENT_00].SciMap << Data8));
//SmiTrig: 0-Active Low, 1-Active High
Mmio32_And_Or (SmiMmioAddr, SMIREG_SMITRIG, ~(gevent_table[Index - GEVENT_00].SmiTrig << (Index - GEVENT_00)), (gevent_table[Index - GEVENT_00].SmiTrig << (Index - GEVENT_00)));
//SmiControl: 0-Disable, 1-SMI, 2-NMI, 3-IRQ13
RegIndex8=(u8)((Index - GEVENT_00) >> 4);
Data8=(u8)(((Index - GEVENT_00) & 0xF) * 2);
Mmio32_And_Or (SmiMmioAddr, SMIREG_SMICONTROL0+RegIndex8, ~(SMICONTROL_MASK << Data8), (gevent_table[Index - GEVENT_00].SmiControl << Data8));
}
}
//
// config MXM
// GPIO9: Input for MXM_PRESENT2#
// GPIO10: Input for MXM_PRESENT1#
// GPIO28: Input for MXM_PWRGD
// GPIO35: Output for MXM Reset
// GPIO45: Output for MXM Power Enable, active HIGH
// GPIO55: Output for MXM_PWR_EN, 1 - Enable, 0 - Disable
// GPIO32: Output for PCIE_SW, 1 - MXM, 0 - LASSO
//
// set INTE#/GPIO32 as GPO for PCIE_SW
RWMEM (IoMuxMmioAddr + SB_GPIO_REG32, AccWidthUint8, 00, 0x1); // GPIO
RWMEM (GpioMmioAddr + SB_GPIO_REG32, AccWidthUint8, 0x03, 0); // GPO
RWMEM (GpioMmioAddr + SB_GPIO_REG32, AccWidthUint8, 0x23, BIT3+BIT6);
// set SATA_IS4#/FANOUT3/GPIO55 as GPO for MXM_PWR_EN
RWMEM (IoMuxMmioAddr + SB_GPIO_REG55, AccWidthUint8, 00, 0x2); // GPIO
RWMEM (GpioMmioAddr + SB_GPIO_REG55, AccWidthUint8, 0x03, 0); // GPO
// set AD9/GPIO9 as GPI for MXM_PRESENT2#
RWMEM (IoMuxMmioAddr + SB_GPIO_REG09, AccWidthUint8, 00, 0x1); // GPIO
RWMEM (GpioMmioAddr + SB_GPIO_REG09, AccWidthUint8, 0x03, BIT5); // GPI
// set AD10/GPIO10 as GPI for MXM_PRESENT1#
RWMEM (IoMuxMmioAddr + SB_GPIO_REG10, AccWidthUint8, 00, 0x1); // GPIO
RWMEM (GpioMmioAddr + SB_GPIO_REG10, AccWidthUint8, 0x03, BIT5); // GPI
// set GNT1#/GPIO44 as GPO for MXM Reset
RWMEM (IoMuxMmioAddr + SB_GPIO_REG44, AccWidthUint8, 00, 0x1); // GPIO
RWMEM (GpioMmioAddr + SB_GPIO_REG44, AccWidthUint8, 0x03, 0); // GPO
// set GNT2#/SD_LED/GPO45 as GPO for MXM Power Enable
RWMEM (IoMuxMmioAddr + SB_GPIO_REG45, AccWidthUint8, 00, 0x2); // GPIO
RWMEM (GpioMmioAddr + SB_GPIO_REG45, AccWidthUint8, 0x03, 0); // GPO
// set AD28/GPIO28 as GPI for MXM_PWRGD
RWMEM (IoMuxMmioAddr + SB_GPIO_REG28, AccWidthUint8, 00, 0x1); // GPIO
RWMEM (GpioMmioAddr + SB_GPIO_REG28, AccWidthUint8, 0x03, BIT5); // GPI
// set BIT3 = 1 (PULLUP disable), BIT4 = 0 (PULLDOWN Disable), BIT6 = 0 (Output LOW)
RWMEM (GpioMmioAddr + SB_GPIO_REG55, AccWidthUint8, 0x23, BIT3);
RWMEM (GpioMmioAddr + SB_GPIO_REG09, AccWidthUint8, 0x23, BIT3);
RWMEM (GpioMmioAddr + SB_GPIO_REG10, AccWidthUint8, 0x23, BIT3);
RWMEM (GpioMmioAddr + SB_GPIO_REG44, AccWidthUint8, 0x23, BIT3);
RWMEM (GpioMmioAddr + SB_GPIO_REG45, AccWidthUint8, 0x23, BIT3);
RWMEM (GpioMmioAddr + SB_GPIO_REG28, AccWidthUint8, 0x23, BIT3);
//
// [GPIO] STRP_DATA: 1->RS880M VCC_NB 1.0V. 0->RS880M VCC_NB 1.1V (Default).
//
//Fusion_Llano BLWriteNBMISC_Dword (ATI_MISC_REG42, (BLReadNBMISC_Dword (ATI_MISC_REG42) | BIT20));
//Fusion_Llano BLWriteNBMISC_Dword (ATI_MISC_REG40, (BLReadNBMISC_Dword (ATI_MISC_REG40) & (~BIT20)));
// check if there any GFX card
Flags = 0;
// Value32 = MmPci32 (0, SB_ISA_BUS, SB_ISA_DEV, SB_ISA_FUNC, R_SB_ISA_GPIO_CONTROL);
// Data8 = Mmio8 (GpioMmioAddr, SB_GPIO_REG09);
ReadMEM (GpioMmioAddr + SB_GPIO_REG09, AccWidthUint8, &Data8);
if (!(Data8 & BIT7))
{
//Data8 = Mmio8 (GpioMmioAddr, SB_GPIO_REG10);
ReadMEM (GpioMmioAddr + SB_GPIO_REG10, AccWidthUint8, &Data8);
if (!(Data8 & BIT7))
{
Flags = 1;
}
}
if ( Flags )
{
// [GPIO] GPIO44: PE_GPIO0 MXM Reset set to 0 for reset, ENH164467
RWMEM (GpioMmioAddr + SB_GPIO_REG44, AccWidthUint8, 0xBF, 0);
// [GPIO] GPIO45: PE_GPIO1 MXM_POWER_ENABLE, SET HIGH
RWMEM (GpioMmioAddr + SB_GPIO_REG45, AccWidthUint8, 0xFF, BIT6);
//PeiStall (PeiServices, NULL, 100); //delay 100 ms (should be >1ms)
SbStall (10000);
// Write the GPIO55(MXM_PWR_EN) to enable the integrated power module
RWMEM (GpioMmioAddr + SB_GPIO_REG55, AccWidthUint8, 0xFF, BIT6);
//PeiStall (PeiServices, NULL, 100); //delay 100 ms (should be >1ms)
// WAIT POWER READY: GPIO28 (MXM_PWRGD)
//while (!(Mmio8 (GpioMmioAddr, SB_GPIO_REG28) && BIT7)){}
ReadMEM (GpioMmioAddr + SB_GPIO_REG28, AccWidthUint8, &Data8);
while (!(Data8 & BIT7))
{
ReadMEM (GpioMmioAddr + SB_GPIO_REG28, AccWidthUint8, &Data8);
}
// [GPIO] GPIO44: PE_GPIO0 MXM Reset set to 1 for reset
// RWMEM (GpioMmioAddr + SB_GPIO_REG44, AccWidthUint8, 0xBF, BIT6);
}
else
{
// Write the GPIO55(MXM_PWR_EN) to disable the integrated power module
RWMEM (GpioMmioAddr + SB_GPIO_REG55, AccWidthUint8, 0xBF, 0);
//PeiStall (PeiServices, NULL, 100); //delay 100 ms (should be >1ms)
SbStall (10000);
// [GPIO] GPIO45: PE_GPIO1 MXM_POWER_ENABLE down
RWMEM (GpioMmioAddr + SB_GPIO_REG45, AccWidthUint8, 0xBF, 0);
}
//
// APU GPP0: On board LAN
// GPIO25: PCIE_RST#_LAN, LOW active
// GPIO63: LAN_CLKREQ#
// GPIO197: LOM_POWER, HIGH Active
// Clock: GPP_CLK3
//
// Set EC_PWM0/EC_TIMER0/GPIO197 as GPO for LOM_POWER
RWMEM (IoMuxMmioAddr + SB_GPIO_REG197, AccWidthUint8, 00, 0x2); // GPIO
// RWMEM (GpioMmioAddr + SB_GPIO_REG197, AccWidthUint8, 0x03, 0); // GPO
RWMEM (GpioMmioAddr + SB_GPIO_REG197, AccWidthUint8, 0x03, BIT6); // output HIGH
RWMEM (GpioMmioAddr + SB_GPIO_REG197, AccWidthUint8, 0x63, BIT3); // pullup DISABLE
// Setup AD25/GPIO25 as GPO for PCIE_RST#_LAN:
RWMEM (IoMuxMmioAddr + SB_GPIO_REG25, AccWidthUint8, 00, 0x1); // GPIO
// RWMEM (GpioMmioAddr + SB_GPIO_REG25, AccWidthUint8, 0x03, 0); // GPO
RWMEM (GpioMmioAddr + SB_GPIO_REG25, AccWidthUint8, 0x03, BIT6); // output HIGH
RWMEM (GpioMmioAddr + SB_GPIO_REG25, AccWidthUint8, 0x63, BIT3); // pullup DISABLE
// set CLK_REQ3#/SATA_IS1#/GPIO63 as CLK_REQ for LAN_CLKREQ#
RWMEM (IoMuxMmioAddr + SB_GPIO_REG63, AccWidthUint8, 00, 0x0); // CLK_REQ3#
RWMEM (MiscMmioAddr + SB_MISC_REG00+1, AccWidthUint8, 0x0F, 0xF0); // Enable GPP_CLK3
//
// APU GPP1: WUSB
// GPIO1: MPCIE_RST2#, LOW active
// GPIO13: WU_DISABLE#, LOW active
// GPIO177: MPICE_PD2, 1 - DISABLE, 0 - ENABLE (Default)
//
// Setup VIN2/SATA1_1/GPIO177 as GPO for MPCIE_PD2#: wireless disable
RWMEM (IoMuxMmioAddr + SB_GPIO_REG177, AccWidthUint8, 00, 0x2); // GPIO
// RWMEM (GpioMmioAddr + SB_GPIO_REG177, AccWidthUint8, 0x03, 0); // GPO
RWMEM (GpioMmioAddr + SB_GPIO_REG177, AccWidthUint8, 0x03, 0); // output LOW
RWMEM (GpioMmioAddr + SB_GPIO_REG177, AccWidthUint8, 0x63, BIT3); // pullup DISABLE
// Setup AD01/GPIO01 as GPO for MPCIE_RST2#
RWMEM (IoMuxMmioAddr + SB_GPIO_REG01, AccWidthUint8, 00, 0x1); // GPIO
// RWMEM (GpioMmioAddr + SB_GPIO_REG01, AccWidthUint8, 0x03, 0); // GPO
RWMEM (GpioMmioAddr + SB_GPIO_REG01, AccWidthUint8, 0x03, BIT6); // output LOW
RWMEM (GpioMmioAddr + SB_GPIO_REG01, AccWidthUint8, 0x63, BIT3); // pullup DISABLE
// Setup AD13/GPIO13 as GPO for WU_DISABLE#: disable WUSB
// RWMEM (IoMuxMmioAddr + SB_GPIO_REG13, AccWidthUint8, 00, 0x1); // GPIO
// RWMEM (GpioMmioAddr + SB_GPIO_REG13, AccWidthUint8, 0x03, 0); // GPO
// RWMEM (GpioMmioAddr + SB_GPIO_REG13, AccWidthUint8, 0x03, BIT6); // output HIGH
// RWMEM (GpioMmioAddr + SB_GPIO_REG13, AccWidthUint8, 0x63, BIT3); // pullup DISABLE
//
// APU GPP2: WWAN
// GPIO0: MPCIE_RST1#, LOW active
// GPIO14: WP_DISABLE#, LOW active
// GPIO176: MPICE_PD1, 1 - DISABLE, 0 - ENABLE (Default)
//
// Set VIN1/GPIO176 as GPO for MPCIE_PD1# for wireless disable
RWMEM (IoMuxMmioAddr + SB_GPIO_REG176, AccWidthUint8, 00, 0x1); // GPIO
// RWMEM (GpioMmioAddr + SB_GPIO_REG176, AccWidthUint8, 0x03, 0); // GPO
RWMEM (GpioMmioAddr + SB_GPIO_REG176, AccWidthUint8, 0x03, 0); // output LOW
RWMEM (GpioMmioAddr + SB_GPIO_REG176, AccWidthUint8, 0x63, BIT3); // pullup DISABLE
// Set AD00/GPIO00 as GPO for MPCIE_RST1#
RWMEM (IoMuxMmioAddr + SB_GPIO_REG00, AccWidthUint8, 00, 0x1); // GPIO
// RWMEM (GpioMmioAddr + SB_GPIO_REG00, AccWidthUint8, 0x03, 0); // GPO
// RWMEM (GpioMmioAddr + SB_GPIO_REG00, AccWidthUint8, 0x03, BIT6); // output LOW
RWMEM (GpioMmioAddr + SB_GPIO_REG00, AccWidthUint8, 0x63, BIT3); // pullup DISABLE
// Set AD14/GPIO14 as GPO for WP_DISABLE#: disable WWAN
// RWMEM (IoMuxMmioAddr + SB_GPIO_REG14, AccWidthUint8, 00, 0x1); // GPIO
// RWMEM (GpioMmioAddr + SB_GPIO_REG14, AccWidthUint8, 0x03, 0); // GPO
// RWMEM (GpioMmioAddr + SB_GPIO_REG14, AccWidthUint8, 0x03, BIT6);
// RWMEM (GpioMmioAddr + SB_GPIO_REG14, AccWidthUint8, 0x63, BIT3);
//
// APU GPP3: 1394
// GPIO59: Power control, HIGH active
// GPIO27: PCIE_RST#_1394, LOW active
// GPIO41: CLKREQ#
// Clock: GPP_CLK8
//
// Setup SATA_IS5#/FANIN3/GPIO59 as GPO for 1394_ON:
RWMEM (IoMuxMmioAddr + SB_GPIO_REG59, AccWidthUint8, 00, 0x2); // GPIO
// RWMEM (GpioMmioAddr + SB_GPIO_REG59, AccWidthUint8, 0x03, 0); // GPO
RWMEM (GpioMmioAddr + SB_GPIO_REG59, AccWidthUint8, 0x03, BIT6); // output HIGH
RWMEM (GpioMmioAddr + SB_GPIO_REG59, AccWidthUint8, 0x63, BIT3); // pullup DISABLE
// Setup AD27/GPIO27 as GPO for MPCIE_RST#_1394
RWMEM (IoMuxMmioAddr + SB_GPIO_REG27, AccWidthUint8, 00, 0x1); // GPIO
// RWMEM (GpioMmioAddr + SB_GPIO_REG27, AccWidthUint8, 0x03, 0); // GPO
RWMEM (GpioMmioAddr + SB_GPIO_REG27, AccWidthUint8, 0x03, BIT6); // output HIGH
RWMEM (GpioMmioAddr + SB_GPIO_REG27, AccWidthUint8, 0x63, BIT3); // pullup DISABLE
// set REQ2#/CLK_REQ2#/GPIO41 as CLK_REQ#
RWMEM (IoMuxMmioAddr + SB_GPIO_REG41, AccWidthUint8, 00, 0x1); // CLK_REQ2#
// set AZ_SDIN3/GPIO170 as GPO for GPIO_GATE_C
RWMEM (IoMuxMmioAddr + SB_GPIO_REG170, AccWidthUint8, 00, 0x1); // GPIO
RWMEM (GpioMmioAddr + SB_GPIO_REG170, AccWidthUint8, 0x03, 0); // GPO
RWMEM (GpioMmioAddr + SB_GPIO_REG170, AccWidthUint8, 0x03, BIT6); // output HIGH
RWMEM (GpioMmioAddr + SB_GPIO_REG170, AccWidthUint8, 0x63, BIT3); // pullup DISABLE
// To fix glitch issue
RWMEM (GpioMmioAddr + SB_GPIO_REG170, AccWidthUint8, 0xBF, 0); // set GPIO_GATE_C to LOW
//
// Enable/Disable OnBoard LAN
//
if (!CONFIG_ONBOARD_LAN)
{ // 1 - DISABLED
RWMEM (GpioMmioAddr + SB_GPIO_REG197, AccWidthUint8, 0xBF, 0); // LOM_POWER off
RWMEM (GpioMmioAddr + SB_GPIO_REG25, AccWidthUint8, 0xBF, 0);
RWMEM (GpioMmioAddr + SB_GPIO_REG63, AccWidthUint8, 0xFF, BIT3); // PULL UP - DISABLED
RWMEM (MiscMmioAddr + SB_MISC_REG00+1, AccWidthUint8, 0x0F, 0); // Disable GPP_CLK3
}
// else
// { // 0 - AUTO
// // set BIT3 = 1 (PULLUP disable), BIT4 = 0 (PULLDOWN Disable)
// RWMEM (GpioMmioAddr + SB_GPIO_REG197, AccWidthUint8, 0x23, BIT3);
// RWMEM (GpioMmioAddr + SB_GPIO_REG25, AccWidthUint8, 0x23, BIT3);
// }
//
// Enable/Disable 1394
//
if (!CONFIG_ONBOARD_1394)
{ // 1 - DISABLED
// RWMEM (GpioMmioAddr + SB_GPIO_REG170, AccWidthUint8, 0xBF, 0); // set GPIO_GATE_C to LOW
RWMEM (GpioMmioAddr + SB_GPIO_REG59, AccWidthUint8, 0xBF, 0); // 1394 power off
RWMEM (GpioMmioAddr + SB_GPIO_REG27, AccWidthUint8, 0xBF, 0);
RWMEM (GpioMmioAddr + SB_GPIO_REG41, AccWidthUint8, 0xFF, BIT3); // pullup DISABLE
RWMEM (MiscMmioAddr + SB_MISC_REG04, AccWidthUint8, 0xF0, 0); // DISABLE GPP_CLK8
// RWMEM (GpioMmioAddr + SB_GPIO_REG170, AccWidthUint8, 0xBF, BIT6); // set GPIO_GATE_C to HIGH
}
// else
// { // 0 - AUTO
// // set BIT3 = 1 (PULLUP disable), BIT4 = 0 (PULLDOWN Disable), BIT6 = 1 (output HIGH)
// RWMEM (GpioMmioAddr + SB_GPIO_REG27, AccWidthUint8, 0x03, BIT6);
// RWMEM (GpioMmioAddr + SB_GPIO_REG27, AccWidthUint8, 0x63, BIT3);
//
// RWMEM (GpioMmioAddr + SB_GPIO_REG59, AccWidthUint8, 0x03, BIT6);
// RWMEM (GpioMmioAddr + SB_GPIO_REG59, AccWidthUint8, 0x63, BIT3);
// }
//
// external USB 3.0 control:
// amdExternalUSBController: CMOS, 0 - AUTO, 1 - DISABLE
// GPIO26: PCIE_RST#_USB3.0
// GPIO46: PCIE_USB30_CLKREQ#
// GPIO200: NEC_USB30_PWR_EN, 0 - OFF, 1 - ON
// Clock: GPP_CLK7
// GPIO172 used as FCH_USB3.0PORT_EN# 0:ENABLE; 1:DISABLE
// if ((Amd_SystemConfiguration.XhciSwitch == 1) || (SystemConfiguration.amdExternalUSBController == 1)) {
// disable Onboard NEC USB3.0 controller
if (!CONFIG_ONBOARD_USB30) {
RWMEM (GpioMmioAddr + SB_GPIO_REG200, AccWidthUint8, 0xBF, 0);
RWMEM (GpioMmioAddr + SB_GPIO_REG26, AccWidthUint8, 0xBF, 0);
RWMEM (GpioMmioAddr + SB_GPIO_REG46, AccWidthUint8, 0xFF, BIT3); // PULL_UP DISABLE
RWMEM (MiscMmioAddr + SB_MISC_REG00+3, AccWidthUint8, 0x0F, 0); // DISABLE GPP_CLK7
RWMEM (GpioMmioAddr + SB_GPIO_REG172, AccWidthUint8, 0xBF, 0); // FCH_USB3.0PORT_EN# 0:ENABLE; 1:DISABLE
}
// }
//
// BlueTooth control: BT_ON
// amdBlueTooth: CMOS, 0 - AUTO, 1 - DISABLE
// GPIO07: BT_ON, 0 - OFF, 1 - ON
//
if (!CONFIG_ONBOARD_BLUETOOTH) {
//- if (SystemConfiguration.amdBlueTooth == 1) {
RWMEM (GpioMmioAddr + SB_GPIO_REG07, AccWidthUint8, 0xBF, 0);
//- }
}
//
// WebCam control:
// amdWebCam: CMOS, 0 - AUTO, 1 - DISABLE
// GPIO34: WEBCAM_ON#, 0 - ON, 1 - OFF
//
if (!CONFIG_ONBOARD_WEBCAM) {
//- if (SystemConfiguration.amdWebCam == 1) {
RWMEM (GpioMmioAddr + SB_GPIO_REG34, AccWidthUint8, 0xBF, BIT6);
//- }
}
//
// Travis enable:
// amdTravisCtrl: CMOS, 0 - DISABLE, 1 - ENABLE
// GPIO66: TRAVIS_EN#, 0 - ENABLE, 1 - DISABLE
//
if (!CONFIG_ONBOARD_TRAVIS) {
//- if (SystemConfiguration.amdTravisCtrl == 0) {
RWMEM (GpioMmioAddr + SB_GPIO_REG66, AccWidthUint8, 0xBF, BIT6);
//- }
}
//
// Disable Light Sensor if needed
//
if (CONFIG_ONBOARD_LIGHTSENSOR) {
//- if (SystemConfiguration.amdLightSensor == 1) {
RWMEM (IoMuxMmioAddr + SB_GEVENT_REG12, AccWidthUint8, 0x00, 0x1);
//- }
}
}
|
