1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
|
#define ASSEMBLY 1
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <cpu/x86/lapic.h>
#include <arch/cpu.h>
#include <stdlib.h>
#include "option_table.h"
#include "pc80/mc146818rtc_early.c"
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
#include "southbridge/amd/amd8111/amd8111_early_smbus.c"
#include "northbridge/amd/amdk8/raminit.h"
#include "cpu/amd/model_fxx/apic_timer.c"
#include "lib/delay.c"
#include "cpu/x86/lapic/boot_cpu.c"
#include "northbridge/amd/amdk8/reset_test.c"
#include "northbridge/amd/amdk8/debug.c"
#include <cpu/amd/model_fxx_rev.h>
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/amd/mtrr/amd_earlymtrr.c"
#include "cpu/x86/bist.h"
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
static void hard_reset(void)
{
set_bios_reset();
// pci_write_config8(PCI_DEV(0, 0x04, 3), 0x41, 0xf1);
// outb(0x0e, 0x0cf9);
outb(0x06, 0x0cf9); /* this value will assert RESET_L and LDTRST_L */
}
static void soft_reset(void)
{
set_bios_reset();
pci_write_config8(PCI_DEV(0, 0x04, 0), 0x47, 1);
}
/*
* GPIO28 of 8111 will control H0_MEMRESET_L
* GPIO29 of 8111 will control H1_MEMRESET_L
*/
static void memreset_setup(void)
{
if (is_cpu_pre_c0()) {
/* Set the memreset low */
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0),
SMBUS_IO_BASE + 0xc0 + 28);
/* Ensure the BIOS has control of the memory lines */
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(0<<0),
SMBUS_IO_BASE + 0xc0 + 29);
} else {
/* Ensure the CPU has controll of the memory lines */
outb((0 << 7)|(0 << 6)|(0<<5)|(0<<4)|(1<<2)|(1<<0),
SMBUS_IO_BASE + 0xc0 + 29);
}
}
static void memreset(int controllers, const struct mem_controller *ctrl)
{
if (is_cpu_pre_c0()) {
udelay(800);
/* Set memreset_high */
outb((0<<7)|(0<<6)|(0<<5)|(0<<4)|(1<<2)|(1<<0),
SMBUS_IO_BASE + 0xc0 + 28);
udelay(90);
}
}
static inline void activate_spd_rom(const struct mem_controller *ctrl)
{
#define SMBUS_SWITCH1 0x71
#define SMBUS_SWITCH2 0x73
/* Switch 1: pca 9545, Switch 2: pca 9543 */
unsigned device = (ctrl->channel0[0]) >> 8;
/* Disable all outputs on SMBus switch 1 */
smbus_send_byte(SMBUS_SWITCH1, 0x0);
/* Select SMBus switch 2 Channel 0/1 */
smbus_send_byte(SMBUS_SWITCH2, device);
}
static inline int spd_read_byte(unsigned device, unsigned address)
{
return smbus_read_byte(device, address);
}
#include "northbridge/amd/amdk8/raminit.c"
#include "northbridge/amd/amdk8/coherent_ht.c"
#include "northbridge/amd/amdk8/incoherent_ht.c"
#include "cpu/amd/dualcore/dualcore.c"
#include "sdram/generic_sdram.c"
#include "resourcemap.c"
#define CHAN0 0x100
#define CHAN1 0x200
#define NODE_RAM(x) \
.node_id = 0+x, \
.f0 = PCI_DEV(0, 0x18+x, 0), \
.f1 = PCI_DEV(0, 0x18+x, 1), \
.f2 = PCI_DEV(0, 0x18+x, 2), \
.f3 = PCI_DEV(0, 0x18+x, 3)
static void main(unsigned long bist)
{
static const struct mem_controller cpu[] = {
{ NODE_RAM(0),
.channel0 = { (0xa0>>1)|CHAN0, (0xa4>>1)|CHAN0, 0, 0 },
.channel1 = { (0xa2>>1)|CHAN0, (0xa6>>1)|CHAN0, 0, 0 }
},
{ NODE_RAM(1),
.channel0 = { (0xa8>>1)|CHAN0, (0xac>>1)|CHAN0, 0, 0 },
.channel1 = { (0xaa>>1)|CHAN0, (0xae>>1)|CHAN0, 0, 0 }
},
{ NODE_RAM(2),
.channel0 = { (0xa8>>1)|CHAN1, (0xac>>1)|CHAN1, 0, 0 },
.channel1 = { (0xaa>>1)|CHAN1, (0xae>>1)|CHAN1, 0, 0 }
},
{ NODE_RAM(3),
.channel0 = { (0xa0>>1)|CHAN1, (0xa4>>1)|CHAN1, 0, 0 },
.channel1 = { (0xa2>>1)|CHAN1, (0xa6>>1)|CHAN1, 0, 0 }
}
};
int needs_reset;
if (bist == 0) {
k8_init_and_stop_secondaries();
}
/* Setup the console */
w83627hf_enable_serial(SERIAL_DEV, TTYS0_BASE);
uart_init();
console_init();
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
setup_aruma_resource_map();
needs_reset = setup_coherent_ht_domain();
needs_reset=ht_setup_chains_x();
#if 0
dump_pci_devices();
#endif
#if 0
print_pci_devices();
#endif
//#if (ALLOW_HT_OVERCLOCKING==1) && (USE_FALLBACK_IMAGE==0)
// if(read_option(CMOS_VSTART_amdk8_1GHz, CMOS_VLEN_amdk8_1GHz, 0))
// {
// print_debug("AMDK8 allowed at 1GHz\r\n");
// } else {
// print_debug("AMDK8 allowed at 800Hz only\r\n");
// }
// if(read_option(CMOS_VSTART_amd8131_800MHz, CMOS_VLEN_amd8131_800MHz, 0))
// {
// print_debug("AMD8131 allowed at 800MHz\r\n");
// } else {
// print_debug("AMD8131 allowed at 600Hz only\r\n");
// }
//#endif
if (needs_reset) {
print_info("HyperT reset -\r\n");
soft_reset();
}
enable_smbus();
memreset_setup();
sdram_initialize(ARRAY_SIZE(cpu), cpu);
#if 0
/* Check the first 1M */
ram_check(0x00000000, 0x000100000);
#endif
}
|
