1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
|
/* Should support 8250, 16450, 16550, 16550A type uarts */
#include <arch/io.h>
#include <uart8250.h>
/* Data */
#define UART_RBR 0x00
#define UART_TBR 0x00
/* Control */
#define UART_IER 0x01
#define UART_IIR 0x02
#define UART_FCR 0x02
#define UART_LCR 0x03
#define UART_MCR 0x04
#define UART_DLL 0x00
#define UART_DLM 0x01
/* Status */
#define UART_LSR 0x05
#define UART_MSR 0x06
#define UART_SCR 0x07
static inline int uart8250_can_tx_byte(unsigned base_port)
{
return inb(base_port + UART_LSR) & 0x20;
}
static inline void uart8250_wait_to_tx_byte(unsigned base_port)
{
while(!uart8250_can_tx_byte(base_port))
;
}
static inline void uart8250_wait_until_sent(unsigned base_port)
{
while(!(inb(base_port + UART_LSR) & 0x40))
;
}
void uart8250_tx_byte(unsigned base_port, unsigned char data)
{
uart8250_wait_to_tx_byte(base_port);
outb(data, base_port + UART_TBR);
/* Make certain the data clears the fifos */
uart8250_wait_until_sent(base_port);
}
int uart8250_can_rx_byte(unsigned base_port)
{
return inb(base_port + UART_LSR) & 0x01;
}
unsigned char uart8250_rx_byte(unsigned base_port)
{
while(!uart8250_can_rx_byte(base_port))
;
return inb(base_port + UART_RBR);
}
void uart8250_init(unsigned base_port, unsigned divisor, unsigned lcs)
{
lcs &= 0x7f;
/* disable interrupts */
outb(0x0, base_port + UART_IER);
/* enable fifo's */
outb(0x01, base_port + UART_FCR);
/* assert DTR and RTS so the other end is happy */
outb(0x03, base_port + UART_MCR);
/* Set Baud Rate Divisor to 12 ==> 115200 Baud */
outb(0x80 | lcs, base_port + UART_LCR);
outb(divisor & 0xFF, base_port + UART_DLL);
outb((divisor >> 8) & 0xFF, base_port + UART_DLM);
outb(lcs, base_port + UART_LCR);
}
/* Initialize a generic uart */
void init_uart8250(unsigned base_port, struct uart8250 *uart)
{
int divisor;
int lcs;
divisor = 115200/(uart->baud ? uart->baud: 1);
lcs = 3;
if (base_port == TTYS0_BASE) {
/* Don't reinitialize the console serial port,
* This is espeically nasty in SMP.
*/
return;
}
uart8250_init(base_port, divisor, lcs);
}
|
