1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2003 Eric Biederman
* Copyright (C) 2006-2010 coresystems GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <arch/io.h>
#include <uart8250.h>
#include <pc80/mc146818rtc.h>
#include <trace.h>
#if CONFIG_USE_OPTION_TABLE
#include "option_table.h"
#endif
/* Should support 8250, 16450, 16550, 16550A type UARTs */
/* Expected character delay at 1200bps is 9ms for a working UART
* and no flow-control. Assume UART as stuck if shift register
* or FIFO takes more than 50ms per character to appear empty.
*
* Estimated that inb() from UART takes 1 microsecond.
*/
#define SINGLE_CHAR_TIMEOUT (50 * 1000)
#define FIFO_TIMEOUT (16 * SINGLE_CHAR_TIMEOUT)
static inline int uart8250_can_tx_byte(unsigned base_port)
{
return inb(base_port + UART_LSR) & UART_LSR_THRE;
}
static inline void uart8250_wait_to_tx_byte(unsigned base_port)
{
unsigned long int i = SINGLE_CHAR_TIMEOUT;
while (i-- && !uart8250_can_tx_byte(base_port));
}
static inline void uart8250_wait_until_sent(unsigned base_port)
{
unsigned long int i = FIFO_TIMEOUT;
while (i-- && !(inb(base_port + UART_LSR) & UART_LSR_TEMT));
}
void uart8250_tx_byte(unsigned base_port, unsigned char data)
{
uart8250_wait_to_tx_byte(base_port);
outb(data, base_port + UART_TBR);
}
void uart8250_tx_flush(unsigned base_port)
{
uart8250_wait_until_sent(base_port);
}
int uart8250_can_rx_byte(unsigned base_port)
{
return inb(base_port + UART_LSR) & UART_LSR_DR;
}
unsigned char uart8250_rx_byte(unsigned base_port)
{
unsigned long int i = SINGLE_CHAR_TIMEOUT;
while (i-- && !uart8250_can_rx_byte(base_port));
if (i)
return inb(base_port + UART_RBR);
else
return 0x0;
}
void uart8250_init(unsigned base_port, unsigned divisor)
{
DISABLE_TRACE;
/* Disable interrupts */
outb(0x0, base_port + UART_IER);
/* Enable FIFOs */
outb(UART_FCR_FIFO_EN, base_port + UART_FCR);
/* assert DTR and RTS so the other end is happy */
outb(UART_MCR_DTR | UART_MCR_RTS, base_port + UART_MCR);
/* DLAB on */
outb(UART_LCR_DLAB | CONFIG_TTYS0_LCS, base_port + UART_LCR);
/* Set Baud Rate Divisor. 12 ==> 9600 Baud */
outb(divisor & 0xFF, base_port + UART_DLL);
outb((divisor >> 8) & 0xFF, base_port + UART_DLM);
/* Set to 3 for 8N1 */
outb(CONFIG_TTYS0_LCS, base_port + UART_LCR);
ENABLE_TRACE;
}
void uart_init(void)
{
/* TODO the divisor calculation is hard coded to standard UARTs. Some
* UARTs won't work with these values. This should be a property of the
* UART used, worst case a Kconfig variable. For now live with hard
* codes as the only devices that might be different are the iWave
* iRainbowG6 and the OXPCIe952 card (and the latter is memory mapped)
*/
unsigned int div = (115200 / CONFIG_TTYS0_BAUD);
#if !defined(__SMM__) && CONFIG_USE_OPTION_TABLE
static const unsigned char divisor[8] = { 1, 2, 3, 6, 12, 24, 48, 96 };
unsigned b_index = 0;
#if defined(__PRE_RAM__)
b_index = read_option(baud_rate, 0);
b_index &= 7;
div = divisor[b_index];
#else
if (get_option(&b_index, "baud_rate") == 0) {
div = divisor[b_index];
}
#endif
#endif
uart8250_init(CONFIG_TTYS0_BASE, div);
}
|
