1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
|
/*
* This file is part of the coreboot project.
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#ifndef __SPD_DDR2_H__
#define __SPD_DDR2_H__
/* SPDs for DDR2 SDRAM */
#define SPD_MEM_TYPE 2
#define SPD_MEM_TYPE_SDRAM_DDR 0x07
#define SPD_MEM_TYPE_SDRAM_DDR2 0x08
#define SPD_DIMM_TYPE 20 /* x bit0 or bit4 =1 mean registered*/
#define SPD_DIMM_TYPE_RDIMM 0x01
#define SPD_DIMM_TYPE_UDIMM 0x02
#define SPD_DIMM_TYPE_SODIMM 0x04
#define SPD_72B_SO_CDIMM 0x06
#define SPD_72B_SO_RDIMM 0x07
#define SPD_DIMM_TYPE_uDIMM 0x08
#define SPD_DIMM_TYPE_mRDIMM 0x10
#define SPD_DIMM_TYPE_mUDIMM 0x20
#define SPD_MOD_ATTRIB 21
#define SPD_MOD_ATTRIB_DIFCK 0x20
#define SPD_MOD_ATTRIB_REGADC 0x11 /* x */
#define SPD_MOD_ATTRIB_PROBE 0x40
#define SPD_DEV_ATTRIB 22 /* Device attributes --- general */
#define SPD_DIMM_CONF_TYPE 11
#define SPD_DIMM_CONF_TYPE_ECC 0x02
#define SPD_DIMM_CONF_TYPE_ADDR_PARITY 0x04 /* ? */
#define SPD_CAS_LAT_MIN_X_1 23
#define SPD_CAS_LAT_MAX_X_1 24
#define SPD_CAS_LAT_MIN_X_2 25
#define SPD_CAS_LAT_MAX_X_2 26
#define SPD_BURST_LENGTHS 16
#define SPD_BURST_LENGTHS_4 (1<<2)
#define SPD_BURST_LENGTHS_8 (1<<3)
#define SPD_ROW_NUM 3 /* Number of Row addresses */
#define SPD_COL_NUM 4 /* Number of Column addresses */
#define SPD_BANK_NUM 17 /* SDRAM Device attributes - Number of Banks on
SDRAM device, it could be 0x4, 0x8, so address
lines for that would be 2, and 3 */
/* Number of Ranks bit [2:0], Package (bit4, 1 = stack, 0 = planar),
* Height bit[7:5]
*/
#define SPD_MOD_ATTRIB_RANK 5
#define SPD_MOD_ATTRIB_RANK_NUM_SHIFT 0
#define SPD_MOD_ATTRIB_RANK_NUM_MASK 0x07
#define SPD_MOD_ATTRIB_RANK_NUM_BASE 1
#define SPD_MOD_ATTRIB_RANK_NUM_MIN 1
#define SPD_MOD_ATTRIB_RANK_NUM_MAX 8
#define SPD_RANK_SIZE 31 /* Only one bit is set */
#define SPD_RANK_SIZE_1GB (1<<0)
#define SPD_RANK_SIZE_2GB (1<<1)
#define SPD_RANK_SIZE_4GB (1<<2)
#define SPD_RANK_SIZE_8GB (1<<3)
#define SPD_RANK_SIZE_16GB (1<<4)
#define SPD_RANK_SIZE_128MB (1<<5)
#define SPD_RANK_SIZE_256MB (1<<6)
#define SPD_RANK_SIZE_512MB (1<<7)
/* valid value 0, 32, 33, 36, 64, 72, 80, 128, 144, 254, 255 */
#define SPD_DATA_WIDTH 6
/* Primary SDRAM Width, it could be 0x08 or 0x10 */
#define SPD_PRI_WIDTH 13
/* Error Checking SDRAM Width, it could be 0x08 or 0x10 */
#define SPD_ERR_WIDTH 14
#define SPD_CAS_LAT 18 /* SDRAM Device Attributes -- CAS Latency */
#define SPD_CAS_LAT_2 (1<<2)
#define SPD_CAS_LAT_3 (1<<3)
#define SPD_CAS_LAT_4 (1<<4)
#define SPD_CAS_LAT_5 (1<<5)
#define SPD_CAS_LAT_6 (1<<6)
#define SPD_CAS_LAT_7 (1<<7)
/* bit [7:2] = 1-63 ns, bit [1:0] 0.25ns+, final value ((val>>2)
* + (val & 3) * 0.25)ns
*/
#define SPD_TRP 27
#define SPD_TRRD 28
#define SPD_TRCD 29
#define SPD_TRAS 30
#define SPD_TWR 36 /* x */
#define SPD_TWTR 37 /* x */
#define SPD_TRTP 38 /* x */
#define SPD_EX_TRC_TRFC 40
/* add byte 0x40 bit [3:1] , so final val41+ table[((val40>>1) & 0x7)]
* ... table[]={0, 0.25, 0.33, 0.5, 0.75, 0, 0}
*/
#define SPD_TRC 41
/* add byte 0x40 bit [6:4] , so final val42+ table[((val40>>4) & 0x7)]
* + (val40 & 1)*256
*/
#define SPD_TRFC 42
#define SPD_TREF 12
#endif /* __SPD_DDR2_H__ */
|
