1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
|
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Serial Presence Detect (SPD) data stored on SDRAM modules.
*
* Datasheet:
* - Name: PC SDRAM Serial Presence Detect (SPD) Specification
* Revision 1.2A, December, 1997
* - PDF: http://www.intel.com/design/chipsets/memory/spdsd12a.pdf
*
* Datasheet (alternative):
* - Name: SERIAL PRESENCE DETECT STANDARD, General Standard
* JEDEC Standard No. 21-C
* Annex J: Serial Presence Detects for DDR2 SDRAM (Revision 1.3):
* - PDF: http://www.jedec.org/download/search/4_01_02_10R17.pdf
*/
#ifndef _SPD_H_
#define _SPD_H_
/* Byte numbers. */
/* Number of bytes used by module manufacturer */
#define SPD_NUM_MANUFACTURER_BYTES 0
#define SPD_TOTAL_SPD_MEMORY_SIZE 1 /* Total SPD memory size */
#define SPD_MEMORY_TYPE 2 /* (Fundamental) memory type */
#define SPD_NUM_ROWS 3 /* Number of row address bits */
/* Number of column address bits */
#define SPD_NUM_COLUMNS 4
/* Number of module rows (banks) */
#define SPD_NUM_DIMM_BANKS 5
#define SPD_MODULE_DATA_WIDTH_LSB 6 /* Module data width (LSB) */
#define SPD_MODULE_DATA_WIDTH_MSB 7 /* Module data width (MSB) */
/* Module interface signal levels */
#define SPD_MODULE_VOLTAGE 8
/* SDRAM cycle time (highest CAS latency), RAS access time (tRAC) */
#define SPD_MIN_CYCLE_TIME_AT_CAS_MAX 9
/* SDRAM access time from clock (highest CAS latency), CAS access time (Tac,
* tCAC)
*/
#define SPD_ACCESS_TIME_FROM_CLOCK 10
#define SPD_DIMM_CONFIG_TYPE 11 /* Module configuration type */
#define SPD_REFRESH 12 /* Refresh rate/type */
#define SPD_PRIMARY_SDRAM_WIDTH 13 /* SDRAM width (primary SDRAM) */
/* Error checking SDRAM (data) width */
#define SPD_ERROR_CHECKING_SDRAM_WIDTH 14
/* SDRAM device attributes, minimum clock delay for back to back random
* column
*/
#define SPD_MIN_CLOCK_DELAY_B2B_RAND_COLUMN 15
/* SDRAM device attributes, burst lengths supported */
#define SPD_SUPPORTED_BURST_LENGTHS 16
/* SDRAM device attributes, number of banks on SDRAM device */
#define SPD_NUM_BANKS_PER_SDRAM 17
/* SDRAM device attributes, CAS latency */
#define SPD_ACCEPTABLE_CAS_LATENCIES 18
/* SDRAM device attributes, CS latency */
#define SPD_CS_LATENCY 19
/* SDRAM device attributes, WE latency */
#define SPD_WE_LATENCY 20
#define SPD_MODULE_ATTRIBUTES 21 /* SDRAM module attributes */
/* SDRAM device attributes, general */
#define SPD_DEVICE_ATTRIBUTES_GENERAL 22
/* SDRAM cycle time (2nd highest CAS latency) */
#define SPD_SDRAM_CYCLE_TIME_2ND 23
/* SDRAM access from clock (2nd highest CAS latency) */
#define SPD_ACCESS_TIME_FROM_CLOCK_2ND 24
/* SDRAM cycle time (3rd highest CAS latency) */
#define SPD_SDRAM_CYCLE_TIME_3RD 25
/* SDRAM access from clock (3rd highest CAS latency) */
#define SPD_ACCESS_TIME_FROM_CLOCK_3RD 26
/* Minimum row precharge time (Trp) */
#define SPD_MIN_ROW_PRECHARGE_TIME 27
/* Minimum row active to row active (Trrd) */
#define SPD_MIN_ROWACTIVE_TO_ROWACTIVE 28
/* Minimum RAS to CAS delay (Trcd) */
#define SPD_MIN_RAS_TO_CAS_DELAY 29
/* Minimum RAS pulse width (Tras) */
#define SPD_MIN_ACTIVE_TO_PRECHARGE_DELAY 30
/* Density of each row on module */
#define SPD_DENSITY_OF_EACH_ROW_ON_MODULE 31
/* Command and address signal input setup time */
#define SPD_CMD_SIGNAL_INPUT_SETUP_TIME 32
/* Command and address signal input hold time */
#define SPD_CMD_SIGNAL_INPUT_HOLD_TIME 33
/* Data signal input setup time */
#define SPD_DATA_SIGNAL_INPUT_SETUP_TIME 34
#define SPD_DATA_SIGNAL_INPUT_HOLD_TIME 35 /* Data signal input hold time */
#define SPD_WRITE_RECOVERY_TIME 36 /* Write recovery time (tWR) */
/* Internal write to read command delay (tWTR) */
#define SPD_INT_WRITE_TO_READ_DELAY 37
/* Internal read to precharge command delay (tRTP) */
#define SPD_INT_READ_TO_PRECHARGE_DELAY 38
/* Memory analysis probe characteristics */
#define SPD_MEM_ANALYSIS_PROBE_PARAMS 39
/* Extension of byte 41 (tRC) and byte 42 (tRFC) */
#define SPD_BYTE_41_42_EXTENSION 40
/* Minimum active to active auto refresh (tRCmin) */
#define SPD_MIN_ACT_TO_ACT_AUTO_REFRESH 41
/* Minimum auto refresh to active/auto refresh (tRFC) */
#define SPD_MIN_AUTO_REFRESH_TO_ACT 42
/* Maximum device cycle time (tCKmax) */
#define SPD_MAX_DEVICE_CYCLE_TIME 43
/* Maximum skew between DQS and DQ (tDQSQ) */
#define SPD_MAX_DQS_DQ_SKEW 44
/* Maximum read data-hold skew factor (tQHS) */
#define SPD_MAX_READ_DATAHOLD_SKEW 45
#define SPD_PLL_RELOCK_TIME 46 /* PLL relock time */
#define SPD_SPD_DATA_REVISION_CODE 62 /* SPD data revision code */
#define SPD_CHECKSUM_FOR_BYTES_0_TO_62 63 /* Checksum for bytes 0-62 */
/* Manufacturer's JEDEC ID code, per EIA/JEP106 (bytes 64-71) */
#define SPD_MANUFACTURER_JEDEC_ID_CODE 64
#define SPD_MANUFACTURING_LOCATION 72 /* Manufacturing location */
/* Manufacturer's part number, in 6-bit ASCII (bytes 73-90) */
#define SPD_MANUFACTURER_PART_NUMBER 73
#define SPD_REVISION_CODE 91 /* Revision code (bytes 91-92) */
/* Manufacturing date (byte 93: year, byte 94: week) */
#define SPD_MANUFACTURING_DATE 93
/* Assembly serial number (bytes 95-98) */
#define SPD_ASSEMBLY_SERIAL_NUMBER 95
/* Manufacturer specific data (bytes 99-125) */
#define SPD_MANUFACTURER_SPECIFIC_DATA 99
/* Intel specification for frequency */
#define SPD_INTEL_SPEC_FOR_FREQUENCY 126
/* Intel specification details for 100MHz support */
#define SPD_INTEL_SPEC_100_MHZ 127
/* DRAM specifications use the following naming conventions for SPD locations */
#define SPD_tRP SPD_MIN_ROW_PRECHARGE_TIME
#define SPD_tRRD SPD_MIN_ROWACTIVE_TO_ROWACTIVE
#define SPD_tRCD SPD_MIN_RAS_TO_CAS_DELAY
#define SPD_tRAS SPD_MIN_ACTIVE_TO_PRECHARGE_DELAY
#define SPD_BANK_DENSITY SPD_DENSITY_OF_EACH_ROW_ON_MODULE
#define SPD_ADDRESS_CMD_HOLD SPD_CMD_SIGNAL_INPUT_HOLD_TIME
/* SDRAM Device Minimum Active to Active/Auto Refresh Time (tRC) */
#define SPD_tRC 41
/* SDRAM Device Minimum Auto Refresh to Active/Auto Refresh (tRFC) */
#define SPD_tRFC 42
/* SPD_MEMORY_TYPE values. */
enum spd_memory_type {
SPD_MEMORY_TYPE_UNDEFINED = 0x00,
SPD_MEMORY_TYPE_FPM_DRAM = 0x01,
SPD_MEMORY_TYPE_EDO = 0x02,
SPD_MEMORY_TYPE_PIPELINED_NIBBLE = 0x03,
SPD_MEMORY_TYPE_SDRAM = 0x04,
SPD_MEMORY_TYPE_MULTIPLEXED_ROM = 0x05,
SPD_MEMORY_TYPE_SGRAM_DDR = 0x06,
SPD_MEMORY_TYPE_SDRAM_DDR = 0x07,
SPD_MEMORY_TYPE_SDRAM_DDR2 = 0x08,
SPD_MEMORY_TYPE_FBDIMM_DDR2 = 0x09,
SPD_MEMORY_TYPE_FB_PROBE_DDR2 = 0x0a,
SPD_MEMORY_TYPE_SDRAM_DDR3 = 0x0b,
SPD_MEMORY_TYPE_DDR4_SDRAM = 0x0c,
SPD_MEMORY_TYPE_DDR4E_SDRAM = 0x0e,
SPD_MEMORY_TYPE_LPDDR3_SDRAM = 0x0f,
SPD_MEMORY_TYPE_LPDDR4_SDRAM = 0x10,
SPD_MEMORY_TYPE_LPDDR4X_SDRAM = 0x11,
SPD_MEMORY_TYPE_DDR5_SDRAM = 0x12,
SPD_MEMORY_TYPE_LPDDR5_SDRAM = 0x13,
SPD_MEMORY_TYPE_DDR5_NVDIMM_P = 0x14,
SPD_MEMORY_TYPE_LPDDR5X_SDRAM = 0x15,
/* This is not a JEDEC module type ID */
SPD_MEMORY_TYPE_LPDDR3_INTEL = 0xf1,
};
/* SPD_MODULE_VOLTAGE values. */
#define SPD_VOLTAGE_TTL 0 /* 5.0 Volt/TTL */
#define SPD_VOLTAGE_LVTTL 1 /* LVTTL */
#define SPD_VOLTAGE_HSTL 2 /* HSTL 1.5 */
#define SPD_VOLTAGE_SSTL3 3 /* SSTL 3.3 */
#define SPD_VOLTAGE_SSTL2 4 /* SSTL 2.5 */
#define SPD_VOLTAGE_SSTL1 5 /* SSTL 1.8 */
/* SPD_DIMM_CONFIG_TYPE values. */
#define ERROR_SCHEME_NONE 0
#define ERROR_SCHEME_PARITY 1
#define ERROR_SCHEME_ECC 2
/* SPD_ACCEPTABLE_CAS_LATENCIES values. */
// TODO: Check values.
#define SPD_CAS_LATENCY_1_0 0x01
#define SPD_CAS_LATENCY_1_5 0x02
#define SPD_CAS_LATENCY_2_0 0x04
#define SPD_CAS_LATENCY_2_5 0x08
#define SPD_CAS_LATENCY_3_0 0x10
#define SPD_CAS_LATENCY_3_5 0x20
#define SPD_CAS_LATENCY_4_0 0x40
#define SPD_CAS_LATENCY_DDR2_2 (1 << 2)
#define SPD_CAS_LATENCY_DDR2_3 (1 << 3)
#define SPD_CAS_LATENCY_DDR2_4 (1 << 4)
#define SPD_CAS_LATENCY_DDR2_5 (1 << 5)
#define SPD_CAS_LATENCY_DDR2_6 (1 << 6)
#define SPD_CAS_LATENCY_DDR2_7 (1 << 7)
/* SPD_SUPPORTED_BURST_LENGTHS values. */
#define SPD_BURST_LENGTH_1 1
#define SPD_BURST_LENGTH_2 2
#define SPD_BURST_LENGTH_4 4
#define SPD_BURST_LENGTH_8 8
#define SPD_BURST_LENGTH_PAGE (1 << 7)
/* SPD_MODULE_ATTRIBUTES values. */
#define MODULE_BUFFERED 1
#define MODULE_REGISTERED 2
#define SPD_UNDEFINED 0x00
#define SPD_ECC_8BIT (1<<3)
#define SPD_ECC_8BIT_LP5_DDR5 (1<<4)
enum lpx_module_type {
LPX_SPD_LPDIMM = 0x07,
LPX_SPD_NONDIMM = 0x0e,
};
#endif
|
