blob: a9891189d2c5b1aae02e171a55ca14d46f9f7b73 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
|
/* Memory information */
/* SPDX-License-Identifier: GPL-2.0-only */
#ifndef _MEMORY_INFO_H_
#define _MEMORY_INFO_H_
#include <stdint.h>
#define DIMM_INFO_SERIAL_SIZE 4
#define DIMM_INFO_PART_NUMBER_SIZE 33
#define DIMM_INFO_TOTAL 8 /* Maximum num of dimm is 8 */
/**
* If this table is filled and put in CBMEM,
* then these info in CBMEM will be used to generate smbios type 17 table
*
* Values are specified according to the JEDEC SPD Standard.
*/
struct dimm_info {
/*
* Size of the module in MiB.
*/
uint32_t dimm_size;
/*
* SMBIOS (not SPD) device type.
*
* See the smbios.h smbios_memory_type enum.
*/
uint16_t ddr_type;
uint16_t ddr_frequency;
uint8_t rank_per_dimm;
uint8_t channel_num;
uint8_t dimm_num;
uint8_t bank_locator;
/*
* SPD serial number.
*/
uint8_t serial[DIMM_INFO_SERIAL_SIZE];
/*
* The last byte is '\0' for the end of string
*
* Must contain only printable ASCII.
*/
uint8_t module_part_number[DIMM_INFO_PART_NUMBER_SIZE];
/*
* SPD Manufacturer ID
*/
uint16_t mod_id;
/*
* SPD Module Type.
*
* See spd.h for valid values.
*
* e.g., SPD_RDIMM, SPD_SODIMM, SPD_MICRO_DIMM
*/
uint8_t mod_type;
/*
* SPD bus width.
*
* Bits 0 - 2 encode the primary bus width:
* 0b000 = 8 bit width
* 0b001 = 16 bit width
* 0b010 = 32 bit width
* 0b011 = 64 bit width
*
* Bits 3 - 4 encode the extension bits (ECC):
* 0b00 = 0 extension bits
* 0b01 = 8 bit of ECC
*
* e.g.,
* 64 bit bus with 8 bits of ECC (72 bits total): 0b1011
* 64 bit bus with 0 bits of ECC (64 bits total): 0b0011
*
* See the smbios.h smbios_memory_bus_width enum.
*/
uint8_t bus_width;
/*
* Voltage Level
*/
uint16_t vdd_voltage;
} __packed;
struct memory_info {
uint8_t dimm_cnt;
struct dimm_info dimm[DIMM_INFO_TOTAL];
} __packed;
#endif
|
