1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
|
#ifndef CPU_X86_MTRR_H
#define CPU_X86_MTRR_H
/* These are the region types */
#define MTRR_TYPE_UNCACHEABLE 0
#define MTRR_TYPE_WRCOMB 1
#define MTRR_TYPE_WRTHROUGH 4
#define MTRR_TYPE_WRPROT 5
#define MTRR_TYPE_WRBACK 6
#define MTRR_NUM_TYPES 7
#define MTRR_CAP_MSR 0x0fe
#define MTRR_CAP_SMRR (1 << 11)
#define MTRR_CAP_WC (1 << 10)
#define MTRR_CAP_FIX (1 << 8)
#define MTRR_CAP_VCNT 0xff
#define MTRR_DEF_TYPE_MSR 0x2ff
#define MTRR_DEF_TYPE_MASK 0xff
#define MTRR_DEF_TYPE_EN (1 << 11)
#define MTRR_DEF_TYPE_FIX_EN (1 << 10)
#define SMRR_PHYS_BASE 0x1f2
#define SMRR_PHYS_MASK 0x1f3
#define MTRR_PHYS_BASE(reg) (0x200 + 2 * (reg))
#define MTRR_PHYS_MASK(reg) (MTRR_PHYS_BASE(reg) + 1)
#define MTRR_PHYS_MASK_VALID (1 << 11)
#define NUM_FIXED_RANGES 88
#define RANGES_PER_FIXED_MTRR 8
#define MTRR_FIX_64K_00000 0x250
#define MTRR_FIX_16K_80000 0x258
#define MTRR_FIX_16K_A0000 0x259
#define MTRR_FIX_4K_C0000 0x268
#define MTRR_FIX_4K_C8000 0x269
#define MTRR_FIX_4K_D0000 0x26a
#define MTRR_FIX_4K_D8000 0x26b
#define MTRR_FIX_4K_E0000 0x26c
#define MTRR_FIX_4K_E8000 0x26d
#define MTRR_FIX_4K_F0000 0x26e
#define MTRR_FIX_4K_F8000 0x26f
#if !defined (__ASSEMBLER__) && !defined(__PRE_RAM__)
#include <stdint.h>
#include <stddef.h>
/*
* The MTRR code has some side effects that the callers should be aware for.
* 1. The call sequence matters. x86_setup_mtrrs() calls
* x86_setup_fixed_mtrrs_no_enable() then enable_fixed_mtrrs() (equivalent
* of x86_setup_fixed_mtrrs()) then x86_setup_var_mtrrs(). If the callers
* want to call the components of x86_setup_mtrrs() because of other
* requirements the ordering should still preserved.
* 2. enable_fixed_mtrr() will enable both variable and fixed MTRRs because
* of the nature of the global MTRR enable flag. Therefore, all direct
* or indirect callers of enable_fixed_mtrr() should ensure that the
* variable MTRR MSRs do not contain bad ranges.
*
* Note that this function sets up MTRRs for addresses above 4GiB.
*/
void x86_setup_mtrrs(void);
/*
* x86_setup_mtrrs_with_detect() does the same thing as x86_setup_mtrrs(), but
* it always dynamically detects the number of variable MTRRs available.
*/
void x86_setup_mtrrs_with_detect(void);
/*
* x86_setup_var_mtrrs() parameters:
* address_bits - number of physical address bits supported by cpu
* above4gb - if set setup MTRRs for addresses above 4GiB else ignore
* memory ranges above 4GiB
*/
void x86_setup_var_mtrrs(unsigned int address_bits, unsigned int above4gb);
void enable_fixed_mtrr(void);
void x86_setup_fixed_mtrrs(void);
/* Set up fixed MTRRs but do not enable them. */
void x86_setup_fixed_mtrrs_no_enable(void);
void x86_mtrr_check(void);
/* Insert a temporary MTRR range for the duration of coreboot's runtime.
* This function needs to be called after the first MTRR solution is derived. */
void mtrr_use_temp_range(uintptr_t begin, size_t size, int type);
#endif
#if !defined(__ASSEMBLER__) && defined(__PRE_RAM__) && !defined(__ROMCC__)
void set_var_mtrr(unsigned reg, unsigned base, unsigned size, unsigned type);
int get_free_var_mtrr(void);
#endif
#if !defined(__ASSEMBLER__) && !defined(__ROMCC__)
/* fms: find most significant bit set, stolen from Linux Kernel Source. */
static inline unsigned int fms(unsigned int x)
{
int r;
__asm__("bsrl %1,%0\n\t"
"jnz 1f\n\t"
"movl $0,%0\n"
"1:" : "=r" (r) : "g" (x));
return r;
}
/* fls: find least significant bit set */
static inline unsigned int fls(unsigned int x)
{
int r;
__asm__("bsfl %1,%0\n\t"
"jnz 1f\n\t"
"movl $32,%0\n"
"1:" : "=r" (r) : "g" (x));
return r;
}
#endif
/* Align up to next power of 2, suitable for ROMCC and assembler too.
* Range of result 256kB to 128MB is good enough here.
*/
#define _POW2_MASK(x) ((x>>1)|(x>>2)|(x>>3)|(x>>4)|(x>>5)| \
(x>>6)|(x>>7)|(x>>8)|((1<<18)-1))
#define _ALIGN_UP_POW2(x) ((x + _POW2_MASK(x)) & ~_POW2_MASK(x))
/* At the end of romstage, low RAM 0..CACHE_TM_RAMTOP may be set
* as write-back cacheable to speed up ramstage decompression.
* Note MTRR boundaries, must be power of two.
*/
#define CACHE_TMP_RAMTOP (16<<20)
#if ((CONFIG_XIP_ROM_SIZE & (CONFIG_XIP_ROM_SIZE -1)) != 0)
# error "CONFIG_XIP_ROM_SIZE is not a power of 2"
#endif
/* Select CACHE_ROM_SIZE to use with MTRR setup. For most cases this
* resolves to a suitable CONFIG_ROM_SIZE but some odd cases need to
* use CONFIG_CACHE_ROM_SIZE_OVERRIDE in the mainboard Kconfig.
*/
#if (CONFIG_CACHE_ROM_SIZE_OVERRIDE != 0)
# define CACHE_ROM_SIZE CONFIG_CACHE_ROM_SIZE_OVERRIDE
#else
# if ((CONFIG_ROM_SIZE & (CONFIG_ROM_SIZE-1)) == 0)
# define CACHE_ROM_SIZE CONFIG_ROM_SIZE
# else
# define CACHE_ROM_SIZE _ALIGN_UP_POW2(CONFIG_ROM_SIZE)
# if (CACHE_ROM_SIZE < CONFIG_ROM_SIZE) || (CACHE_ROM_SIZE >= (2 * CONFIG_ROM_SIZE))
# error "CACHE_ROM_SIZE is not optimal."
# endif
# endif
#endif
#if ((CACHE_ROM_SIZE & (CACHE_ROM_SIZE-1)) != 0)
# error "CACHE_ROM_SIZE is not a power of 2."
#endif
#define CACHE_ROM_BASE (((1<<20) - (CACHE_ROM_SIZE>>12))<<12)
#if (IS_ENABLED(CONFIG_SOC_SETS_MSRS) && !defined(__ASSEMBLER__) \
&& !defined(__ROMCC__))
#include <cpu/x86/msr.h>
#include <arch/cpu.h>
/*
* Set the MTRRs using the data on the stack from setup_stack_and_mtrrs.
* Return a new top_of_stack value which removes the setup_stack_and_mtrrs data.
*/
asmlinkage void *soc_set_mtrrs(void *top_of_stack);
asmlinkage void soc_enable_mtrrs(void);
#endif /* CONFIG_SOC_SETS_MSRS ... */
#endif /* CPU_X86_MTRR_H */
|
