1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <arch/io.h>
#include <console/console.h>
#include <device/device.h>
#include <delay.h>
#include "ec.h"
#include "chip.h"
static u16 ec_data_port;
static u16 ec_cmd_port;
#define KBD_IBF (1 << 1) /* 1: input buffer full (data ready for ec) */
#define KBD_OBF (1 << 0) /* 1: output buffer full (data ready for host) */
static void ec_setports(u16 data, u16 cmd)
{
ec_data_port = data;
ec_cmd_port = cmd;
}
static int send_kbd_command(u8 command)
{
int timeout;
timeout = 100000; /* 1 second */
while ((inb(ec_cmd_port) & KBD_IBF) && --timeout) {
udelay(10);
if ((timeout & 0xff) == 0)
printk(BIOS_SPEW, ".");
}
if (!timeout) {
printk(BIOS_DEBUG, "Timeout while sending command 0x%02x to EC!\n",
command);
return -1;
}
outb(command, ec_cmd_port);
return 0;
}
static int send_kbd_data(u8 data)
{
int timeout;
timeout = 100000; /* 1 second */
while ((inb(ec_cmd_port) & KBD_IBF) && --timeout) { /* wait for IBF = 0 */
udelay(10);
if ((timeout & 0xff) == 0)
printk(BIOS_SPEW, ".");
}
if (!timeout) {
printk(BIOS_DEBUG, "Timeout while sending data 0x%02x to EC!\n",
data);
return -1;
}
outb(data, ec_data_port);
return 0;
}
/*
* kbc1126_thermalinit: initialize fan control
* The code is found in EcThermalInit of the vendor firmware.
*/
static int kbc1126_thermalinit(u8 cmd, u8 value)
{
printk(BIOS_DEBUG, "KBC1126: initialize fan control.");
if (send_kbd_command(cmd) < 0)
return -1;
if (send_kbd_data(0x27) < 0)
return -1;
if (send_kbd_data(0x01) < 0)
return -1;
/*
* The following code is needed for fan control when AC is plugged in.
*/
if (send_kbd_command(cmd) < 0)
return -1;
if (send_kbd_data(0xd5) < 0)
return -1;
if (send_kbd_data(value) < 0)
return -1;
printk(BIOS_DEBUG, "KBC1126: fan control initialized.\n");
return 0;
}
/*
* kbc1126_kbdled: set CapsLock and NumLock LEDs
* This is used in MemoryErrorReport of the vendor firmware.
*/
static void kbc1126_kbdled(u8 cmd, u8 val)
{
if (send_kbd_command(cmd) < 0)
return;
if (send_kbd_data(0xf0) < 0)
return;
if (send_kbd_data(val) < 0)
return;
}
static void kbc1126_enable(struct device *dev)
{
struct ec_hp_kbc1126_config *conf = dev->chip_info;
ec_setports(conf->ec_data_port, conf->ec_cmd_port);
kbc1126_kbdled(conf->ec_ctrl_reg, 0);
if (kbc1126_thermalinit(conf->ec_ctrl_reg, conf->ec_fan_ctrl_value) < 0)
printk(BIOS_DEBUG, "KBC1126: error when initializing fan control.\n");
}
struct chip_operations ec_hp_kbc1126_ops = {
.name = "SMSC KBC1126 for HP laptops",
.enable_dev = kbc1126_enable
};
|
