1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
|
/*
* This file is part of the coreboot project.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <console/console.h>
#include <console/uart.h>
#if IS_ENABLED(CONFIG_USE_OPTION_TABLE)
#include <option.h>
#include "option_table.h"
#endif
unsigned int default_baudrate(void)
{
#if !defined(__SMM__) && IS_ENABLED(CONFIG_USE_OPTION_TABLE)
static const unsigned baud[8] =
{ 115200, 57600, 38400, 19200, 9600, 4800, 2400, 1200 };
unsigned b_index = 0;
#if defined(__ROMCC__)
b_index = read_option(baud_rate, 0xff);
#else
if (get_option(&b_index, "baud_rate") != CB_SUCCESS)
b_index = 0xff;
#endif
if (b_index < 8)
return baud[b_index];
#endif
return CONFIG_TTYS0_BAUD;
}
/* Calculate divisor. Do not floor but round to nearest integer. */
unsigned int uart_baudrate_divisor(unsigned int baudrate,
unsigned int refclk, unsigned int oversample)
{
return (1 + (2 * refclk) / (baudrate * oversample)) / 2;
}
#if !IS_ENABLED(CONFIG_UART_OVERRIDE_INPUT_CLOCK_DIVIDER)
unsigned int uart_input_clock_divider(void)
{
/* Specify the default oversample rate for the UART.
*
* UARTs oversample the receive data. The UART's input clock first
* enters the baud-rate divider to generate the oversample clock. Then
* the UART typically divides the result by 16. The asynchronous
* receive data is synchronized with the oversample clock and when a
* start bit is detected the UART delays half a bit time using the
* oversample clock. Samples are then taken to verify the start bit and
* if present, samples are taken for the rest of the frame.
*/
return 16;
}
#endif
#if !IS_ENABLED(CONFIG_UART_OVERRIDE_REFCLK)
unsigned int uart_platform_refclk(void)
{
/* Specify the default input clock frequency for the UART.
*
* The older UART's used an input clock frequency of 1.8432 MHz which
* with the 16x oversampling provided the maximum baud-rate of 115200.
* Specify this as maximum baud-rate multiplied by oversample so that
* it is obvious that the maximum baud rate is 115200 when divided by
* oversample clock. Also note that crystal on the board does not
* change when software selects another input clock divider.
*/
return 115200 * 16;
}
#endif
|
