1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
|
/* SPDX-License-Identifier: BSD-3-Clause or GPL-2.0-only */
#include <delay.h>
#include <types.h>
#include <console/console.h>
#include <device/i2c_simple.h>
#include "tps65090.h"
/* TPS65090 register addresses */
enum {
REG_CG_CTRL0 = 4,
REG_CG_STATUS1 = 0xa,
};
enum {
CG_CTRL0_ENC_MASK = 0x01,
MAX_FET_NUM = 7,
MAX_CTRL_READ_TRIES = 5,
/* TPS65090 FET_CTRL register values */
FET_CTRL_TOFET = 1 << 7, /* Timeout, startup, overload */
FET_CTRL_PGFET = 1 << 4, /* Power good for FET status */
FET_CTRL_WAIT = 3 << 2, /* Overcurrent timeout max */
FET_CTRL_ADENFET = 1 << 1, /* Enable output auto discharge */
FET_CTRL_ENFET = 1 << 0, /* Enable FET */
};
static int tps65090_i2c_write(unsigned int bus,
unsigned int reg_addr, unsigned char value)
{
int ret;
ret = i2c_writeb(bus, TPS65090_I2C_ADDR, reg_addr, value);
printk(BIOS_DEBUG, "%s: reg=%#x, value=%#x, ret=%d\n",
__func__, reg_addr, value, ret);
return ret;
}
static int tps65090_i2c_read(unsigned int bus,
unsigned int reg_addr, unsigned char *value)
{
int ret;
printk(BIOS_DEBUG, "%s: reg=%#x, ", __func__, reg_addr);
ret = i2c_readb(bus, TPS65090_I2C_ADDR, reg_addr, value);
if (ret)
printk(BIOS_DEBUG, "fail, ret=%d\n", ret);
else
printk(BIOS_DEBUG, "value=%#x, ret=%d\n", *value, ret);
return ret;
}
/**
* Set the power state for a FET
*
* @param bus
* @param fet_id Fet number to set (1..MAX_FET_NUM)
* @param set 1 to power on FET, 0 to power off
* @return FET_ERR_COMMS if we got a comms error, FET_ERR_NOT_READY if the
* FET failed to change state. If all is ok, returns 0.
*/
static int tps65090_fet_set(unsigned int bus, enum fet_id fet_id, int set)
{
int retry, value;
uint8_t reg;
value = FET_CTRL_ADENFET | FET_CTRL_WAIT;
if (set)
value |= FET_CTRL_ENFET;
if (tps65090_i2c_write(bus, fet_id, value))
return FET_ERR_COMMS;
/* Try reading until we get a result */
for (retry = 0; retry < MAX_CTRL_READ_TRIES; retry++) {
if (tps65090_i2c_read(bus, fet_id, ®))
return FET_ERR_COMMS;
/* Check that the fet went into the expected state */
if (!!(reg & FET_CTRL_PGFET) == set)
return 0;
/* If we got a timeout, there is no point in waiting longer */
if (reg & FET_CTRL_TOFET)
break;
udelay(1000);
}
printk(BIOS_DEBUG, "FET %d: Power good should have set to %d but "
"reg=%#02x\n", fet_id, set, reg);
return FET_ERR_NOT_READY;
}
/* FIXME(dhendrix): add timer API */
#if 0
int tps65090_fet_enable(unsigned int bus, enum fet_id fet_id)
{
int loops;
unsigned long start;
int ret = 0;
start = get_timer(0);
for (loops = 0; ; loops++) {
ret = tps65090_fet_set(bus, fet_id, 1);
if (!ret)
break;
if (get_timer(start) > 100)
break;
/* Turn it off and try again until we time out */
tps65090_fet_set(bus, fet_id, 0);
}
if (ret) {
printk(BIOS_DEBUG, "%s: FET%d failed to power on: time=%lums, "
"loops=%d\n", __func__, fet_id,
get_timer(start), loops);
} else if (loops) {
printk(BIOS_DEBUG, "%s: FET%d powered on after %lums, "
"loops=%d\n", __func__, fet_id,
get_timer(start), loops);
}
/*
* Unfortunately, there are some conditions where the power
* good bit will be 0, but the fet still comes up. One such
* case occurs with the lcd backlight. We'll just return 0 here
* and assume that the fet will eventually come up.
*/
if (ret == FET_ERR_NOT_READY)
ret = 0;
return ret;
}
#endif
int tps65090_fet_enable(unsigned int bus, enum fet_id fet_id)
{
int loops;
int ret = 0;
for (loops = 0; loops < 100; loops++) {
ret = tps65090_fet_set(bus, fet_id, 1);
if (!ret)
break;
/* Turn it off and try again until we time out */
tps65090_fet_set(bus, fet_id, 0);
udelay(1000);
}
if (ret) {
printk(BIOS_DEBUG, "%s: FET%d failed to power on\n",
__func__, fet_id);
} else if (loops) {
printk(BIOS_DEBUG, "%s: FET%d powered on\n",
__func__, fet_id);
}
/*
* Unfortunately, there are some conditions where the power
* good bit will be 0, but the fet still comes up. One such
* case occurs with the lcd backlight. We'll just return 0 here
* and assume that the fet will eventually come up.
*/
if (ret == FET_ERR_NOT_READY)
ret = 0;
return ret;
}
int tps65090_fet_disable(unsigned int bus, enum fet_id fet_id)
{
return tps65090_fet_set(bus, fet_id, 0);
}
int tps65090_fet_is_enabled(unsigned int bus, enum fet_id fet_id)
{
unsigned char reg;
int ret;
ret = tps65090_i2c_read(bus, fet_id, ®);
if (ret) {
printk(BIOS_DEBUG, "fail to read FET%u_CTRL", fet_id);
return -2;
}
return reg & FET_CTRL_ENFET;
}
int tps65090_is_charging(unsigned int bus)
{
unsigned char val;
int ret;
ret = tps65090_i2c_read(bus, REG_CG_CTRL0, &val);
if (ret)
return ret;
return val & CG_CTRL0_ENC_MASK ? 1 : 0;
}
int tps65090_set_charge_enable(unsigned int bus, int enable)
{
unsigned char val;
int ret;
ret = tps65090_i2c_read(bus, REG_CG_CTRL0, &val);
if (!ret) {
if (enable)
val |= CG_CTRL0_ENC_MASK;
else
val &= ~CG_CTRL0_ENC_MASK;
ret = tps65090_i2c_write(bus, REG_CG_CTRL0, val);
}
if (ret) {
printk(BIOS_DEBUG, "%s: Failed to enable\n", __func__);
return ret;
}
return 0;
}
int tps65090_get_status(unsigned int bus)
{
unsigned char val;
int ret;
ret = tps65090_i2c_read(bus, REG_CG_STATUS1, &val);
if (ret)
return ret;
return val;
}
|
