1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
|
/*
* Copyright 2008, Network Appliance Inc.
* Copyright 2014, Sage Electronic Engineering, LLC.
*
* Author: Jason McMullan <mcmullan <at> netapp.com>
* Licensed under the GPL-2 or later.
*/
#include <console/console.h>
#include <stdlib.h>
#include <spi_flash.h>
#include <spi-generic.h>
#include <string.h>
#include "spi_flash_internal.h"
/* M25Pxx-specific commands */
#define CMD_AT25_WREN 0x06 /* Write Enable */
#define CMD_AT25_WRDI 0x04 /* Write Disable */
#define CMD_AT25_RDSR 0x05 /* Read Status Register */
#define CMD_AT25_WRSR 0x01 /* Write Status Register */
#define CMD_AT25_READ 0x03 /* Read Data Bytes */
#define CMD_AT25_FAST_READ 0x0b /* Read Data Bytes at Higher Speed */
#define CMD_AT25_PP 0x02 /* Page Program */
#define CMD_AT25_SE 0x20 /* Sector (4K) Erase */
#define CMD_AT25_BE 0xd8 /* Block (64K) Erase */
#define CMD_AT25_CE 0xc7 /* Chip Erase */
#define CMD_AT25_DP 0xb9 /* Deep Power-down */
#define CMD_AT25_RES 0xab /* Release from DP, and Read Signature */
struct atmel_spi_flash_params {
uint16_t id;
/* Log2 of page size in power-of-two mode */
uint8_t l2_page_size;
uint16_t pages_per_sector;
uint16_t sectors_per_block;
uint16_t nr_blocks;
const char *name;
};
static const struct atmel_spi_flash_params atmel_spi_flash_table[] = {
{
.id = 0x3015,
.l2_page_size = 8,
.pages_per_sector = 16,
.sectors_per_block = 16,
.nr_blocks = 32,
.name = "AT25X16",
},
{
.id = 0x47,
.l2_page_size = 8,
.pages_per_sector = 16,
.sectors_per_block = 16,
.nr_blocks = 64,
.name = "AT25DF32",
},
{
.id = 0x3017,
.l2_page_size = 8,
.pages_per_sector = 16,
.sectors_per_block = 16,
.nr_blocks = 128,
.name = "AT25X64",
},
{
.id = 0x4015,
.l2_page_size = 8,
.pages_per_sector = 16,
.sectors_per_block = 16,
.nr_blocks = 32,
.name = "AT25Q16",
},
{
.id = 0x4016,
.l2_page_size = 8,
.pages_per_sector = 16,
.sectors_per_block = 16,
.nr_blocks = 64,
.name = "AT25Q32",
},
{
.id = 0x4017,
.l2_page_size = 8,
.pages_per_sector = 16,
.sectors_per_block = 16,
.nr_blocks = 128,
.name = "AT25Q64",
},
{
.id = 0x4018,
.l2_page_size = 8,
.pages_per_sector = 16,
.sectors_per_block = 16,
.nr_blocks = 256,
.name = "AT25Q128",
},
};
static int atmel_write(const struct spi_flash *flash, u32 offset, size_t len,
const void *buf)
{
unsigned long byte_addr;
unsigned long page_size;
size_t chunk_len;
size_t actual;
int ret;
u8 cmd[4];
page_size = flash->page_size;
for (actual = 0; actual < len; actual += chunk_len) {
byte_addr = offset % page_size;
chunk_len = min(len - actual, page_size - byte_addr);
chunk_len = spi_crop_chunk(&flash->spi, sizeof(cmd), chunk_len);
cmd[0] = CMD_AT25_PP;
cmd[1] = (offset >> 16) & 0xff;
cmd[2] = (offset >> 8) & 0xff;
cmd[3] = offset & 0xff;
#if IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)
printk(BIOS_SPEW, "PP: 0x%p => cmd = { 0x%02x 0x%02x%02x%02x }"
" chunk_len = %zu\n", buf + actual,
cmd[0], cmd[1], cmd[2], cmd[3], chunk_len);
#endif
ret = spi_flash_cmd(&flash->spi, CMD_AT25_WREN, NULL, 0);
if (ret < 0) {
printk(BIOS_WARNING, "SF: Enabling Write failed\n");
goto out;
}
ret = spi_flash_cmd_write(&flash->spi, cmd, sizeof(cmd),
buf + actual, chunk_len);
if (ret < 0) {
printk(BIOS_WARNING, "SF: Atmel Page Program failed\n");
goto out;
}
ret = spi_flash_cmd_wait_ready(flash, SPI_FLASH_PROG_TIMEOUT);
if (ret)
goto out;
offset += chunk_len;
}
#if IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)
printk(BIOS_SPEW, "SF: Atmel: Successfully programmed %zu bytes @"
" 0x%lx\n", len, (unsigned long)(offset - len));
#endif
ret = 0;
out:
return ret;
}
static const struct spi_flash_ops spi_flash_ops = {
.write = atmel_write,
.erase = spi_flash_cmd_erase,
#if IS_ENABLED(CONFIG_SPI_FLASH_NO_FAST_READ)
.read = spi_flash_cmd_read_slow,
#else
.read = spi_flash_cmd_read_fast,
#endif
};
int spi_flash_probe_atmel(const struct spi_slave *spi, u8 *idcode,
struct spi_flash *flash)
{
const struct atmel_spi_flash_params *params;
unsigned int i;
for (i = 0; i < ARRAY_SIZE(atmel_spi_flash_table); i++) {
params = &atmel_spi_flash_table[i];
if (params->id == ((idcode[1] << 8) | idcode[2]))
break;
}
if (i == ARRAY_SIZE(atmel_spi_flash_table)) {
printk(BIOS_WARNING, "SF: Unsupported Atmel ID %02x%02x\n",
idcode[1], idcode[2]);
return -1;
}
memcpy(&flash->spi, spi, sizeof(*spi));
flash->name = params->name;
/* Assuming power-of-two page size initially. */
flash->page_size = 1 << params->l2_page_size;
flash->sector_size = flash->page_size * params->pages_per_sector;
flash->size = flash->sector_size * params->sectors_per_block *
params->nr_blocks;
flash->erase_cmd = CMD_AT25_SE;
flash->ops = &spi_flash_ops;
return 0;
}
|
