1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <arch/io.h>
#include <commonlib/helpers.h>
#include <cpu/x86/tsc.h>
#include <delay.h>
#include <pc80/i8254.h>
/* Initialize i8254 timers */
void setup_i8254(void)
{
/* Timer 0 (taken from biosemu) */
outb(TIMER0_SEL | WORD_ACCESS | MODE3 | BINARY_COUNT, TIMER_MODE_PORT);
outb(0x00, TIMER0_PORT);
outb(0x00, TIMER0_PORT);
/* Timer 1 */
outb(TIMER1_SEL | LOBYTE_ACCESS | MODE3 | BINARY_COUNT,
TIMER_MODE_PORT);
outb(0x12, TIMER1_PORT);
}
#define CLOCK_TICK_RATE 1193180U /* Underlying HZ */
/* ------ Calibrate the TSC -------
* Too much 64-bit arithmetic here to do this cleanly in C, and for
* accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
* output busy loop as low as possible. We avoid reading the CTC registers
* directly because of the awkward 8-bit access mechanism of the 82C54
* device.
*/
#define CALIBRATE_INTERVAL ((2*CLOCK_TICK_RATE)/1000) /* 2ms */
#define CALIBRATE_DIVISOR (2*1000) /* 2ms / 2000 == 1usec */
unsigned long calibrate_tsc_with_pit(void)
{
/* Set the Gate high, disable speaker */
outb((inb(0x61) & ~0x02) | 0x01, 0x61);
/*
* Now let's take care of CTC channel 2
*
* Set the Gate high, program CTC channel 2 for mode 0,
* (interrupt on terminal count mode), binary count,
* load 5 * LATCH count, (LSB and MSB) to begin countdown.
*/
outb(0xb0, 0x43); /* binary, mode 0, LSB/MSB, Ch 2 */
outb(CALIBRATE_INTERVAL & 0xff, 0x42); /* LSB of count */
outb(CALIBRATE_INTERVAL >> 8, 0x42); /* MSB of count */
{
tsc_t start;
tsc_t end;
unsigned long count;
start = rdtsc();
count = 0;
do {
count++;
} while ((inb(0x61) & 0x20) == 0);
end = rdtsc();
/* Error: ECTCNEVERSET */
if (count <= 1)
goto bad_ctc;
/* 64-bit subtract - gcc just messes up with long longs */
__asm__("subl %2,%0\n\t"
"sbbl %3,%1"
: "=a" (end.lo), "=d" (end.hi)
: "g" (start.lo), "g" (start.hi),
"0" (end.lo), "1" (end.hi));
/* Error: ECPUTOOFAST */
if (end.hi)
goto bad_ctc;
/* Error: ECPUTOOSLOW */
if (end.lo <= CALIBRATE_DIVISOR)
goto bad_ctc;
return DIV_ROUND_UP(end.lo, CALIBRATE_DIVISOR);
}
/*
* The CTC wasn't reliable: we got a hit on the very first read,
* or the CPU was so fast/slow that the quotient wouldn't fit in
* 32 bits..
*/
bad_ctc:
return 0;
}
#if CONFIG(UNKNOWN_TSC_RATE)
static u32 timer_tsc;
unsigned long tsc_freq_mhz(void)
{
if (timer_tsc > 0)
return timer_tsc;
timer_tsc = calibrate_tsc_with_pit();
/* Set some semi-ridiculous rate if approximation fails. */
if (timer_tsc == 0)
timer_tsc = 5000;
return timer_tsc;
}
#endif
void beep(unsigned int frequency_hz, unsigned int duration_msec)
{
unsigned int count = CLOCK_TICK_RATE / frequency_hz;
/* Set command for counter 2, 2 byte write, mode 3 */
outb(TIMER2_SEL | WORD_ACCESS | MODE3, TIMER_MODE_PORT);
/* Select desired Hz */
outb(count & 0xff, TIMER2_PORT);
outb((count >> 8) & 0xff, TIMER2_PORT);
/* Switch on the speaker */
outb(inb(PPC_PORTB) | (PPCB_T2GATE | PPCB_SPKR), PPC_PORTB);
/* Block for specified milliseconds */
mdelay(duration_msec);
/* Switch off the speaker */
outb(inb(PPC_PORTB) & ~(PPCB_T2GATE | PPCB_SPKR), PPC_PORTB);
}
|
