blob: a3fa60bdc08bb9dd5a4080f2d2f2ddccdca053aa (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
|
/* SPDX-License-Identifier: GPL-2.0-only */
#ifndef _I2C_PTN3460_H_
#define _I2C_PTN3460_H_
#include <types.h>
#define PTN_EDID_OFF 0x00
#define PTN_EDID_LEN 0x80
#define PTN_CONFIG_OFF 0x80
#define PTN_CONFIG_LEN 0x19
#define PTN_FLASH_CFG_OFF 0xE8
#define PTN_FLASH_CFG_LEN 0x04
#define PTN_MAX_EDID_NUM 6
#define PTN_ENABLE_EMULATION (1 << 0)
/* Define some error codes that can be used */
#define PTN_SUCCESS 0x00000000
#define PTN_BUS_ERROR 0x10000000
#define PTN_INVALID_EDID 0x20000000
#define PTN_INVALID_EDID_BLOCK 0x30000000
#define PTN_ERROR 0x40000000
struct ptn_3460_config {
u8 dp_interface_ctrl; /* DisplayPort interface control */
u8 lvds_interface_ctrl1; /* LVDS interface control register 1 */
u8 lvds_interface_ctrl2; /* LVDS interface control register 2 */
u8 lvds_interface_ctrl3; /* LVDS interface control register 3 */
u8 edid_rom_emulation; /* select which EDID-block is emulated */
u8 edid_rom_access_ctrl; /* select which EDID block to map to 0..0x7F */
u8 pwm_min[3]; /* smallest PWM frequency for back light */
u8 pwm_max[3]; /* biggest PWM frequency for back light */
u8 fast_link_ctrl; /* Fast link training control register */
u8 pin_cfg_ctrl1; /* Pin configuration control register 1 */
u8 pin_cfg_ctrl2; /* Pin configuration control register 2 */
u8 pwm_default; /* Default PWM bit count in DPCD register */
u16 pwm_value; /* Current PWM bit count in DPCD register */
u8 pwm_default_freq; /* Default PWM frequency in DPCD register */
u8 t3_timing; /* Panel T3 timing value */
u8 t12_timing; /* Panel T12 timing value */
u8 backlight_ctrl; /* Back light control register */
u8 t2_delay; /* Panel T2 delay */
u8 t4_timing; /* Panel T4 timing value */
u8 t5_delay; /* Panel T5 delay */
} __packed;
struct ptn_3460_flash {
u8 cmd; /* Flash command (erase or erase and flash) */
u16 magic; /* Magic number needed by the flash algorithm */
u8 trigger; /* Trigger for starting flash operation */
} __packed;
/* We need functions which we can call to get mainboard specific data */
/* These functions can be implemented somewhere else but must exist. */
extern enum cb_err mainboard_ptn3460_get_edid(uint8_t edid_data[PTN_EDID_LEN]);
extern uint8_t mainboard_ptn3460_select_edid_table(void);
extern enum cb_err mainboard_ptn3460_config(struct ptn_3460_config *cfg_ptr);
#endif /* _I2C_PTN3460_H_ */
|
