1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
|
/* SPDX-License-Identifier: GPL-2.0-only */
#include <commonlib/bsd/bcd.h>
#include <console/console.h>
#include <device/smbus.h>
#include <version.h>
#include "chip.h"
/* Set RTC date from coreboot build date. */
static void pcf8523_set_build_date(struct device *dev)
{
smbus_write_byte(dev, YEAR_REG, coreboot_build_date.year);
smbus_write_byte(dev, MONTH_REG, coreboot_build_date.month);
smbus_write_byte(dev, WEEKDAY_REG, coreboot_build_date.weekday);
smbus_write_byte(dev, DAY_REG, coreboot_build_date.day);
}
/* Set RTC date from user defined date (available in e.g. device tree). */
static void pcf8523_set_user_date(struct device *dev)
{
struct drivers_i2c_pcf8523_config *config = dev->chip_info;
smbus_write_byte(dev, YEAR_REG, bin2bcd(config->user_year));
smbus_write_byte(dev, MONTH_REG, bin2bcd(config->user_month));
smbus_write_byte(dev, DAY_REG, bin2bcd(config->user_day));
smbus_write_byte(dev, WEEKDAY_REG, bin2bcd(config->user_weekday));
}
static void pcf8523_final(struct device *dev)
{
/* Read back current RTC date and time and print it to the console. */
printk(BIOS_INFO, "%s: Current date %02d.%02d.%02d %02d:%02d:%02d\n",
dev->chip_ops->name,
bcd2bin(smbus_read_byte(dev, MONTH_REG)),
bcd2bin(smbus_read_byte(dev, DAY_REG)),
bcd2bin(smbus_read_byte(dev, YEAR_REG)),
bcd2bin(smbus_read_byte(dev, HOUR_REG)),
bcd2bin(smbus_read_byte(dev, MINUTE_REG)),
bcd2bin(smbus_read_byte(dev, SECOND_REG)) & ~OS_BIT);
}
static void pcf8523_init(struct device *dev)
{
struct drivers_i2c_pcf8523_config *config = dev->chip_info;
uint8_t reg = 0;
if (!(smbus_read_byte(dev, SECOND_REG) & OS_BIT)) {
/* Set control registers to a known good value even if no
* power loss event was recognized. There were issues with
* this RTC in the past where control registers were
* corrupted and OS bit was not set. */
reg = smbus_read_byte(dev, CTRL_REG_1);
reg &= ~(STOP_BIT | CAP_SEL);
reg |= ((!!config->cap_sel) << 7);
smbus_write_byte(dev, CTRL_REG_1, reg);
reg = smbus_read_byte(dev, CTRL_REG_3);
reg &= ~PM_MASK;
reg |= ((config->power_mode & 0x07) << 5);
smbus_write_byte(dev, CTRL_REG_3, reg);
reg = smbus_read_byte(dev, TMR_CLKOUT_REG);
reg &= ~COF_MASK;
reg |= ((config->cof_selection & 0x07) << 3);
smbus_write_byte(dev, TMR_CLKOUT_REG, reg);
return;
}
/* Initialize the RTC fully only if a power-loss event was recognized.
* In this case RTC will be set up with default date and time. */
smbus_write_byte(dev, CTRL_REG_1, ((!!config->cap_sel) << 7) |
((!!config->second_int_en) << 2) |
((!!config->alarm_int_en) << 1) |
(!!config->correction_int_en));
smbus_write_byte(dev, CTRL_REG_2, ((!!config->wdt_int_en) << 2) |
((!!config->tmrA_int_en) << 1) |
(!!config->tmrB_int_en));
smbus_write_byte(dev, CTRL_REG_3, ((config->power_mode & 0x07) << 5) |
((!!config->bat_switch_int_en) << 1) |
(!!config->bat_low_int_en));
smbus_write_byte(dev, OFFSET_REG, ((!!config->offset_mode) << 7) |
(config->offset_val & 0x7f));
smbus_write_byte(dev, TMR_CLKOUT_REG, ((!!config->tmrA_int_mode) << 7) |
((!!config->tmrB_int_mode) << 6) |
((config->cof_selection & 0x07) << 3) |
((config->tmrA_mode & 0x03) << 1) |
(!!config->tmrB_mode));
smbus_write_byte(dev, TMR_A_FREQ_REG, (config->tmrA_prescaler & 0x7));
smbus_write_byte(dev, TMR_B_FREQ_REG, (config->tmrB_prescaler & 0x7) |
((config->tmrB_pulse_cfg & 0x7) << 4));
/* Before setting the clock stop oscillator. */
reg = smbus_read_byte(dev, CTRL_REG_1);
reg |= STOP_BIT;
smbus_write_byte(dev, CTRL_REG_1, reg);
if (config->set_user_date) {
/* Set user date defined in device tree. */
printk(BIOS_DEBUG, "%s: Set to user date\n",
dev->chip_ops->name);
pcf8523_set_user_date(dev);
} else {
/* Set date from coreboot build. */
printk(BIOS_DEBUG, "%s: Set to coreboot build date\n",
dev->chip_ops->name);
pcf8523_set_build_date(dev);
}
/* Set time to 01:00:00 */
smbus_write_byte(dev, HOUR_REG, 1);
smbus_write_byte(dev, MINUTE_REG, 0);
smbus_write_byte(dev, SECOND_REG, 0);
/* Start oscillator again as the clock is set up now */
reg &= ~STOP_BIT;
smbus_write_byte(dev, CTRL_REG_1, reg);
}
static struct device_operations pcf8523c_ops = {
.read_resources = noop_read_resources,
.set_resources = noop_set_resources,
.init = pcf8523_init,
.final = pcf8523_final
};
static void pcf8523_enable(struct device *dev)
{
dev->ops = &pcf8523c_ops;
}
struct chip_operations drivers_i2c_pcf8523_ops = {
CHIP_NAME("PCF8523")
.enable_dev = pcf8523_enable
};
|
