blob: ccf1c9a98862f27f1377282d52a87572f408b6ff (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
|
#include <console/console.h>
#include <device/device.h>
#include <device/smbus.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <part/hard_reset.h>
#include <cpu/x86/msr.h>
#include "chip.h"
#define ADM1027_REG_CONFIG1 0x40
#define CFG1_STRT 0x01
#define CFG1_LOCK 0x02
#define CFG1_RDY 0x04
#define CFG1_FSPD 0x08
#define CFG1_VXI 0x10
#define CFT1_FSPDIS 0x20
#define CFG1_TODIS 0x40
#define CFG1_VCC 0x80
#define ADM1027_REG_CONFIG2 0x73
#define ADM1027_REG_CONFIG3 0x78
static void adm1027_enable_monitoring(device_t dev)
{
int result;
result = smbus_read_byte(dev, ADM1027_REG_CONFIG1);
if(!(result & CFG1_RDY) ) {
printk_debug("ADM1027: monitoring not ready\r\n");
return;
}
result = (result | CFG1_STRT);
result = smbus_write_byte(dev, ADM1027_REG_CONFIG1, result);
result = smbus_read_byte(dev, ADM1027_REG_CONFIG1);
if (!(result & CFG1_STRT)) {
printk_debug("ADM1027: monitoring would not enable\r\n");
}
printk_debug("ADM1027: monitoring enabled\r\n");
}
static void adm1027_init(device_t dev)
{
if (dev->enabled && dev->path.type == DEVICE_PATH_I2C)
{
if(ops_smbus_bus(get_pbus_smbus(dev))) {
if( dev->bus->dev->path.type == DEVICE_PATH_I2C) smbus_set_link(dev); // it is under mux
adm1027_enable_monitoring(dev);
}
}
}
static void adm1027_noop(device_t dummy)
{
}
static struct device_operations adm1027_operations = {
.read_resources = adm1027_noop,
.set_resources = adm1027_noop,
.enable_resources = adm1027_noop,
.init = adm1027_init,
};
static void enable_dev(struct device *dev)
{
dev->ops = &adm1027_operations;
}
struct chip_operations drivers_i2c_adm1027_ops = {
CHIP_NAME("adm1027")
.enable_dev = enable_dev,
};
|
