blob: e8baea1c4033f0a7d7feeec7abba2ae9f3bdaae1 (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
|
#include <console/console.h>
#include <device/device.h>
#include <device/smbus.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <device/pci_ops.h>
#include <cpu/x86/msr.h>
#define ADM1026_DEVICE 0x2d /* Either 0x2c or 0x2d or 0x2e */
#define ADM1026_REG_CONFIG1 0x00
#define CFG1_MONITOR 0x01
#define CFG1_INT_ENABLE 0x02
#define CFG1_INT_CLEAR 0x04
#define CFG1_AIN8_9 0x08
#define CFG1_THERM_HOT 0x10
#define CFT1_DAC_AFC 0x20
#define CFG1_PWM_AFC 0x40
#define CFG1_RESET 0x80
#define ADM1026_REG_CONFIG2 0x01
#define ADM1026_REG_CONFIG3 0x07
static void adm1026_enable_monitoring(struct device *dev)
{
int result;
result = smbus_read_byte(dev, ADM1026_REG_CONFIG1);
result = (result | CFG1_MONITOR) & ~(CFG1_INT_CLEAR | CFG1_RESET);
result = smbus_write_byte(dev, ADM1026_REG_CONFIG1, result);
result = smbus_read_byte(dev, ADM1026_REG_CONFIG1);
if (!(result & CFG1_MONITOR)) {
printk(BIOS_DEBUG, "ADM1026: monitoring would not enable");
}
}
static void adm1026_init(struct device *dev)
{
if (dev->enabled && dev->path.type == DEVICE_PATH_I2C) {
if (ops_smbus_bus(get_pbus_smbus(dev))) {
if (dev->bus->dev->path.type == DEVICE_PATH_I2C)
smbus_set_link(dev); // it is under mux
adm1026_enable_monitoring(dev);
}
}
}
static void adm1026_noop(struct device *dummy)
{
}
static struct device_operations adm1026_operations = {
.read_resources = adm1026_noop,
.set_resources = adm1026_noop,
.enable_resources = adm1026_noop,
.init = adm1026_init,
};
static void enable_dev(struct device *dev)
{
dev->ops = &adm1026_operations;
}
struct chip_operations drivers_i2c_adm1026_ops = {
CHIP_NAME("adm1026")
.enable_dev = enable_dev,
};
|
