1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
|
/*
* This software and ancillary information (herein called SOFTWARE)
* called LinuxBIOS is made available under the terms described here.
*
* The SOFTWARE has been approved for release with associated
* LA-CC Number 00-34. Unless otherwise indicated, this SOFTWARE has
* been authored by an employee or employees of the University of
* California, operator of the Los Alamos National Laboratory under
* Contract No. W-7405-ENG-36 with the U.S. Department of Energy.
*
* The U.S. Government has rights to use, reproduce, and distribute this
* SOFTWARE. The public may copy, distribute, prepare derivative works
* and publicly display this SOFTWARE without charge, provided that this
* Notice and any statement of authorship are reproduced on all copies.
*
* Neither the Government nor the University makes any warranty, express
* or implied, or assumes any liability or responsibility for the use of
* this SOFTWARE. If SOFTWARE is modified to produce derivative works,
* such modified SOFTWARE should be clearly marked, so as not to confuse
* it with the version available from LANL.
*
* Copyright (C) 2000, Ron Minnich rminnich@lanl.gov
* Advanced Computing Lab, LANL
*/
/* Start code to put an i386 or later processor into 32-bit protected mode.
*/
#include <arch/rom_segs.h>
.code16
.globl _start
.type _start, @function
_start:
cli
/* Save the BIST result */
movl %eax, %ebp
post_code(POST_RESET_VECTOR_CORRECT)
/* IMMEDIATELY invalidate the translation lookaside buffer (TLB) before
* executing any further code. Even though paging is disabled we
* could still get false address translations due to the TLB if we
* didn't invalidate it. Thanks to kmliu@sis.com.tw for this TLB fix.
*/
xorl %eax, %eax
movl %eax, %cr3 /* Invalidate TLB*/
/* Invalidating the cache here seems to be a bad idea on
* modern processors. Don't.
* If we are hyperthreaded or we have multiple cores it is bad,
* for SMP startup. On Opterons it causes a 5 second delay.
* Invalidating the cache was pure paranoia in any event.
* If you cpu needs it you can write a cpu dependent version of
* entry16.inc.
*/
/* Load an IDT with NULL limit to prevent the 16bit IDT being used
* in protected mode before c_start.S sets up a 32bit IDT when entering
* ram stage.
*/
movw $nullidt_offset, %bx
lidt %cs:(%bx)
/* Note: gas handles memory addresses in 16 bit code very poorly.
* In particular it doesn't appear to have a directive allowing you
* associate a section or even an absolute offset with a segment register.
*
* This means that anything except cs:ip relative offsets are
* a real pain in 16 bit mode. And explains why it is almost
* imposible to get gas to do lgdt correctly.
*
* One way to work around this is to have the linker do the
* math instead of the assembler. This solves the very
* pratical problem of being able to write code that can
* be relocated.
*
* An lgdt call before we have memory enabled cannot be
* position independent, as we cannot execute a call
* instruction to get our current instruction pointer.
* So while this code is relocateable it isn't arbitrarily
* relocatable.
*
* The criteria for relocation have been relaxed to their
* utmost, so that we can use the same code for both
* our initial entry point and startup of the second cpu.
* The code assumes when executing at _start that:
* (((cs & 0xfff) == 0) and (ip == _start & 0xffff))
* or
* ((cs == anything) and (ip == 0)).
*
* The restrictions in reset16.inc mean that _start initially
* must be loaded at or above 0xffff0000 or below 0x100000.
*
* The linker scripts computs gdtptr16_offset by simply returning
* the low 16 bits. This means that the intial segment used
* when start is called must be 64K aligned. This should not
* restrict the address as the ip address can be anything.
*/
movw %cs, %ax
shlw $4, %ax
movw $gdtptr16_offset, %bx
subw %ax, %bx
data32 lgdt %cs:(%bx)
movl %cr0, %eax
andl $0x7FFAFFD1, %eax /* PG,AM,WP,NE,TS,EM,MP = 0 */
orl $0x60000001, %eax /* CD, NW, PE = 1 */
movl %eax, %cr0
/* Restore BIST to %eax */
movl %ebp, %eax
/* Now that we are in protected mode jump to a 32 bit code segment. */
data32 ljmp $ROM_CODE_SEG, $__protected_start
/**
* The gdt is defined in entry32.inc, it has a 4 Gb code segment
* at 0x08, and a 4 GB data segment at 0x10;
*/
.align 4
.globl gdtptr16
gdtptr16:
.word gdt_end - gdt -1 /* compute the table limit */
.long gdt /* we know the offset */
.align 4
.globl nullidt
nullidt:
.word 0 /* limit */
.long 0
.word 0
.globl _estart
_estart:
.code32
|
